Key Takeaways
- Volume doubled, margins surged: H1 sales volume hit 47,200 metric tons (vs 22,500 LY), EBITDA margin expanded from 9.48% to 15.5%, and PAT nearly doubled on an adjusted basis, all while steel prices continued to soften.
- The Amzen acquisition dominates the narrative: Management is "pretty sure" of winning the NCLAT-approved asset, has already bought adjacent land, and is deferring other CapEx on that assumption; a hearing is set for November 18.
- Scale is the moat: Overhead cost per metric ton for CRF collapsed from INR6,000 to INR1,600, with a path to INR1,266, letting the company cut selling prices to grab share without hurting margins.
- No dilution pledge: Management committed to zero equity dilution until March 2028, even while pursuing Amzen and building forging and spring units.
- What to watch next quarter: The November 18 NCLAT hearing on Amzen, the commercial start of the forging unit by April/May, and whether the spring unit secures RDSO licenses within the promised 40–45 days.
The Amzen Acquisition: The Quarter’s Defining Bet
- Status: All cases filed, written submissions and rejoinders given to NCLAT, hearing scheduled for November 18. The rival bidder, Myotic, submitted an affidavit stating it is no longer interested and has no objection to the asset being handed to Cosmic CRF, subject to Section 29A eligibility.
- Strategic logic: Amzen was built by American Railcar and carries capacity for local coaches, BOXNHL wagons, and potentially a coach business. Management describes it as a ready-to-run asset that would compress a two-to-three-year greenfield build into a nine-month ramp.
- Contingency planning: Management has already bought strategic parcels of land adjacent to Amzen. If the acquisition fails (a "1% chance"), the company would deploy the ~INR200 crores of cash it is carrying to build its own wagon shop on that land, a path that would take two to three years.
- Funding ambiguity: When asked whether the INR230 crores raised via preferential issue is sufficient or if additional loans are needed, management described the fundraising history but did not directly confirm sufficiency.
- Operational timeline if won: Bridge girders and fabrications could start in three to four months; railway licenses would take six to seven months; wagon prototypes would take eight to nine months, though prototypes may not be required.
Aditya Vikram Birla: "I'm in love with that asset, Amzen. And I don't want to fall in love with something else before I fall out of love with this one. So I don't mean to fall out of love with this one. So this is something Prathmesh, I'm pretty sure we will, we will win."
Volume Growth & Capacity Build-Out
- H1 volume doubled: 47,200 metric tons sold in H1 FY26 vs 22,500 in H1 FY25, putting the company on track to hit the 100,000–110,000 ton full-year target.
- Capacity expanded aggressively: Standalone CRF capacity moved from 36,000 to 55,000 metric tons; NSEPL (acquired at ~17,000–18,000 tons) now at ~80,000 metric tons; Cosmic Springs & Engineers at 10,400 metric tons.
- Utilization at 80%: Current utilization is 80%, but management notes it can fluctuate with site conditions (cloudbursts in Calcutta, flooded customer sites preventing material delivery).
- Singur asset maxed out: The Singur CRF facility is capped at 50,000–55,000 metric tons due to freight and logistics constraints (17 trailers being loaded simultaneously). Further CRF growth requires a new asset.
- Fungible asset base: All manufacturing assets are interchangeable across railways, infra, auto products, EV bike body parts, green building structures, and truck body building. Management will always choose the market that offers lower-hanging fruit and scale.
Aditya Vikram Birla: "My cost today, which when I started making CRF used to be around INR6,000 per metric ton in terms of its operational capacity, and INR6,000 per metric ton was my average cost. Cut to today, it's INR1,600. And I think this year, we should touch INR1,266 in totality per metric ton, which is a massive range."
Margin & Cash Flow Turnaround
- EBITDA margin nearly doubled: From 9.48% to 15.5% in a challenging market, driven by economies of scale that collapsed overhead costs per ton.
- Operating cash flow discipline: Negative operating cash flow shrank from INR89 crores to INR2 crores in six months. Management "put its foot down" on debtors, refusing to finance others' working capital even at the cost of top-line growth.
- Pricing pass-through model: Management does not take commodity risk. It operates on a conversion-rate model with fixed pricing agreed with clients, traders, and buyers. If steel prices soften further, PAT and EBITDA percentages will grow because working capital deployment and interest costs will be lower.
- Springs: a high-margin niche: The springs business carries ~25% margins vs 12–13% for other businesses, but its top-line contribution is capped by the limited size of the wagon repair and manufacturing market.
Aditya Vikram Birla: "We put our foot down to all our debtors. And we were in a position where we said, the boss, we will want the money back, like we will want our money. Our money cannot be used to finance others' endeavours."
New Business Lines: Forging, Springs & Wagon Manufacturing
- Forging unit under construction: Cosmic Springs & Engineers is building a forging unit (hammer forging, 3–3.5 tons per hammer) targeting items railways are shifting from casting to forging. Commercial run expected by April or May, subject to rainfall.
- Spring unit awaiting RDSO license: The helical and Casnub spring factory in Jangalpur, Howrah, is fully ready. RDSO licenses are expected within 40–45 days.
- Wagon manufacturing ambition: Management has been working toward entering wagon manufacturing for the past year and sees it as the primary new business interest. The Amzen asset would accelerate this entry.
- Bridge girder takeover: A separate unit takeover is planned for manufacturing fabricated bridges and dedicated freight corridor girders, with an existing RDSO registration for 25,000 metric tons to be reinstated.
- Coach business deferred: Management will focus on completing the wagon vertical first before entering the coach segment. The company can supply to Vande Bharat today, but the quantum required is small relative to wagons.
Industry Structure & Competitive Position
- R&D lead on new wagon designs: Cosmic CRF was the only manufacturer supplying CRFs for the new BOSM wagon when RDSO released the design, because prior R&D work with Jindal Rail in 2021–22 for a similar wagon meant the parts were already developed. Management believes it is ahead of the curve on solution-orientation wagons (BCFC cement, fly ash, tank wagons).
- Group synergy advantage: The Cosmic Birla Group has been in wagon building, coach, and locomotive ancillarization for 50+ years, giving Cosmic CRF access to R&D, nimbleness, and low cost without owning those other companies.
- Industry consolidation thesis: Management expects only six to seven large players to consolidate the railway fabrication industry over the next three to four years, with smaller players absorbed under them.
- Wagon industry growth: The railway wagon fleet will reach 8.5 lakh units not by 2031 but by 2034–2035, with 35,000–40,000 wagons manufactured annually. Industry CAGR is 7.5–8%.
- Steel pricing outlook: Another 5% softening is expected; beyond that, steel makers would incur massive losses. The 50-50 split between stainless steel and mild steel in railway orders is expected to continue next year. If the stainless steel contribution increases, ASP could rise from ~INR65,000 to INR70,000–75,000 per ton.
Aditya Vikram Birla: "When actually RDS who came out with this wagon and its design, we were the only ones who were supplying the CRFs to all the wagon builders for this BOSM."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Volume target | 100,000–110,000 metric tons (doubling FY25 volumes) | FY26 end |
| No equity dilution | Zero dilution irrespective of requirement | Until March 2028 |
| Spring unit RDSO license | Licenses for the ready spring factory | Within 40–45 days |
| Forging unit commercial run | Hammer forging operations start | April or May (subject to rainfall) |
| Credit rating upgrade | Apply for better rating now that H1 reports are ready | Next couple of months |
| Bridge girder unit takeover | Complete the envisaged takeover | Within this financial year |
| Amzen ramp (if won) | Bridge girders/fabrications start; railway licenses in place; wagon prototypes | 3–4 months; 6–7 months; 8–9 months from day one |
| Production aspiration | 3–3.5 lakh tons | Next 2–3 years, subject to all companies coming in and executions completing |
Key Metrics
| Metric | Q2 FY26 |
|---|---|
| Consolidated revenue | ₹304.5 cr (H1 FY26), +80% YoY vs ₹169.4 cr in H1 FY25 |
| Consolidated EBITDA | ₹37.8 cr (H1 FY26), +73% to 75% YoY vs ₹21.9 cr in H1 FY25 |
| Consolidated PAT | ₹24.5 cr (H1 FY26), +40% YoY vs reported ₹17.6 cr; ~100% vs adjusted ₹11.7 cr in H1 FY25 |
| EBITDA margin | 15.5% (H1 FY26), up from 9.48% in H1 FY25 |
| PAT margin | ~9% (H1 FY26), up from ~5% in H1 FY25 |
| EPS growth | +40% YoY |
| Sales volume | 47,200 metric tons (H1 FY26), vs 22,500 metric tons in H1 FY25 |
| Order book | ₹615 cr (consolidated), vs ₹521 cr last year |
| Total installed capacity | 1,45,000 metric tons (management rounds to ~150,000 metric tons) |
| Capacity utilization | 80% |
| Operating cash flow | ₹2 cr negative (H1 FY26), improved from ₹89 cr negative last year |
| Average selling price | ₹64,000–₹65,000 per metric ton, vs ₹104,000–₹110,000 in FY22 |
| CRF conversion cost per metric ton | ₹1,600, down from ₹6,000; target ₹1,266 this year |
| Volume growth (YoY) | 108.64% |
| Cosmic Springs revenue split | 30% railways, 70% industrial |