Key Takeaways
- Volume surge in a shrinking market: Cement volumes grew 32% YoY while the Southern region grew just ~4%, driven by a newly stabilized kiln and aggressive market entry.
- Structural margin reset underway: EBITDA per ton (including solar) jumped from INR246 to INR835 in 9M FY26, a 240% increase, with most of the 450 bps margin expansion described as structural, not cyclical.
- Profitability masked by a non-cash charge: Reported PAT was negative solely due to a deferred tax liability from book-vs-tax depreciation differences, an Ind AS adjustment with no cash impact.
- Solar integration is a genuine moat: A 40 MW captive solar plant meets the entire power requirement, with surplus sold at market rates, creating a structural cost advantage management claims no regional peer can match.
- What to watch next quarter: Whether the promised Q1/Q2 consolidation and pricing discipline in the Southern market actually materializes, the pace of the climb from 31% toward 40% capacity utilization, and any concrete step toward the delayed RMC project.
Volume Outperformance & Market Position
- New kiln, new reach: The stabilized new kiln enabled a 32% volume jump in a Southern region where competitors saw negative or flat growth. Entry into Coastal and Southern Maharashtra opened previously unaddressed western markets.
- GGBS as a wedge product: Adding granulated ground-based slag lets the company cross-sell into large national highway projects; once a customer uses GGBS, the natural inclination is to buy cement from the same supplier.
- Proximity advantage: The plant sits at the Karnataka-Maharashtra border, addressing both southern and western markets with lower logistic costs than distant competitors. Expansion into Pune, Ratnagiri and Sawantwadi is showing improvement because the company is one of the closest cement plants to those regions.
- Institutional mix rising: Institutional buyers reached 8–10% of sales by Q3, spanning National Highway Authority projects, RMC projects and direct B2B, diversifying the customer base beyond retail and dealer channels.
- The utilization gap is a market problem, not a plant problem: Capacity utilization sits at just 31% because the plant only started this year. Management says the real challenge is that the market is intensely competitive and the company's footprint is not growing as fast as it deserves; in a normal market, 50–60% utilization would have been reached efficiently.
Venkatesh Katwa: "our challenge is not improving the capacity. Our challenge is because the market is very, very competitive, our footprint is not growing as fast as what we deserve to get."
Structural Cost Advantage & Margin Mechanics
- Solar integration is the core moat: A 40 MW solar facility at Koppal supplies ~25 MW for captive consumption, covering the entire power requirement, while the remaining 15 MW is sold in the open access market. No specific PPA is signed because the Government of Karnataka incentivizes open-access sales without regulatory charges or losses, capturing the best possible market price.
- High fixed-cost model amplifies operating leverage: The solar model carries high fixed cost versus variable cost, so every incremental tonne dispatched drops a disproportionately high contribution margin to the bottom line.
- EBITDA per ton transformed: Excluding solar, EBITDA per ton moved from minus INR47 to INR397; including solar, from INR246 to INR835, a 240% growth over 9M FY26, while blended realizations stayed nearly flat (INR3,300–INR3,460 range) and fuel prices actually increased.
- Power cost target: Management expects the price of power to fall below INR1 per unit by the end of FY27.
- Breakeven among the lowest: Management claims the breakeven point is probably the lowest in the industry, perhaps below 20% utilization, because even at 30% the company generates substantial EBITDA and cash profits.
Venkatesh Katwa: "my breakeven point is probably the lowest in the industry, maybe less than 20% because even at 30%, we are able to make a substantial EBITDA and the cash profits. And I can tell you easily that we will be the lowest in the industry."
Southern Market Dynamics & Pricing Pressure
- Overcapacity and price war: The Southern region houses roughly 30% of India's cement capacity, and intense competition among top players has triggered a price war. Naked cement rates have grown at a CAGR of barely 1% due to overcapacity and margin compression.
- Consolidation delayed: Management had expected the consolidation period to end and pricing discipline to improve by Q1/Q2 FY26, but Q3 prices did not improve as anticipated. Most South plants registered negative EBITDA growth and only minor positive volume growth of 3–4%.
- Trade vs non-trade margins: No significant difference exists; non-trade prices may be 2–3% lower, and as a small plant the company has not maintained a substantial gap.
- Receivables stretched by market entry: The receivable cycle increased from 13 to 17–18 days because aggressive marketing required offering more discounts and payment terms to penetrate the existing market. Southern region shows higher collection days, but newer areas like Coastal and Southern Maharashtra have far lower days, averaging the cycle out.
Profitability & the Non-Cash PAT Distortion
- The PAT loss is an accounting entry, not a cash drain: Negative reported PAT stems entirely from a deferred tax liability created by the large difference between depreciation on the books and depreciation as per income tax. This is an Ind AS adjustment with zero cash impact.
- EBITDA tells the real story: Despite the headline PAT loss, the company delivered substantial EBITDA and cash profits at just 31% utilization, underscoring the operating leverage in the model.
Venkatesh Katwa: "the reason why we -- it shows negative is because there is something called a deferred tax liability, which appears because of a huge difference in the depreciation on the books and as per income tax, which is basically an Ind AS adjustment, but not a cash expense as what it portrays."
Balance Sheet & Capital Allocation
- Debt repayment on track: FY26 obligations total roughly INR29 crores, most of which has already been repaid. Three term loans close this year, reducing next year's repayment obligation by approximately 16.4%. Another terminal closes next year, further lowering obligations going forward.
- Prepayment ambition tied to utilization: Once the company reaches 50%-plus utilization levels, management expects additional residual cash flows to go toward impairing debt ahead of schedule.
- RMC project deliberately deferred: Land has already been purchased for an RMC project in Belgaum (population ~10 lakh), where the corporate office is located. The first project will be modeled there to understand business nuances before expanding across Southern Maharashtra, Goa and other parts of North Karnataka. However, management will wait until at least 50% capacity utilization before proceeding, because cement dispatches did not improve as expected in Q3 and Q4.
- AFR on the horizon: Management is considering alternative fuels and raw materials once the plant stabilizes to a certain capacity, which may take another 2–3 quarters.
- Limestone supply secure: Despite not owning mines, the company is the only purchaser in its area with 20–30 suppliers. No issues are expected even at 70% utilization.
Venkatesh Katwa: "what the management is of the opinion is we will wait for some more time until we reach, say, at least 50% plus capacity utilization, then look into RMCs."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Capacity utilization exit rate | Sign off FY26 at ~40% utilization | FY26 exit |
| Capacity utilization target (compressed market) | 45% to 55% if market remains compressed; 60% effortlessly if market improves | FY27 |
| EBITDA at higher utilization | INR90–100 crores at 60% utilization; EBITDA margin to grow ~2x or higher | When 60% utilization reached |
| Power cost reduction | Price of power below INR1 per unit | By end of FY27 |
| Clinker-to-cement ratio | Improve to ~1.9 to 2.0 | "Maybe a quarter down the line" |
| Debt prepayment | Additional residual cash flows directed to impairing debt ahead of schedule | Once 50%+ utilization reached |
| AFR adoption | Evaluate alternative fuels and raw materials | After plant stabilizes, ~2–3 quarters |
| RMC project start | Proceed with Belgaum RMC project | Once 50%+ capacity utilization reached |
Key Metrics
| Metric | Q3 FY26 |
|---|---|
| Total income | ₹38.69 cr, +33.22% YoY |
| EBITDA | ₹10.5 cr, +63.1% YoY |
| EBITDA margin | 27.68%, expanded 477 bps YoY from 22.9% |
| Cash profit | ₹4.03 cr, +89% YoY |
| Total income (9M FY26) | ₹116.31 cr, +35.81% YoY |
| EBITDA (9M FY26) | ₹29.28 cr, +66.85% YoY |
| EBITDA margin (9M FY26) | 25.68%, improved 454 bps YoY |
| PAT (9M FY26) | ₹3.23 cr, vs loss in prior year |
| EPS (9M FY26) | ₹1.85 |
| Cement volume | ~78,000 tons, +32% YoY from 58,960 tons |
| Blended realization per ton | ₹3,350–₹3,400, stable YoY; peaked at ₹3,460 in Q2 |
| Capacity utilization | ~31%, targeting ~40% by FY26 year-end |
| EBITDA per ton (incl. solar benefit) | ₹835, up 240% from ₹246 in Q3 FY25 |
| Term debt | ₹159 cr, reduced ~15% from ₹188 cr |
| Receivable cycle | 17–18 days, up from 13 days |
| Institutional sales mix | 8–10% of volumes, up from prior quarters |