Key Takeaways
- Revenue down 12% YoY, but the story is about FY27: Q2 was hit by a U.S. tariff-driven order deferral and domestic energy meter weakness, yet management guided for ~15% FY26 growth and 20-30% in FY27, anchored on alloy capacity expansion and new relay sales.
- The alloy business is the near-term engine: Running at full capacity with a new furnace arriving by December, alloy has immediate order visibility for Q4 and is expected to drive most of the H2 revenue ramp toward the INR120 crore half-year target.
- Quantum Magnetics is the long-dated, high-stakes bet: The JV targets a INR3,700 crore revenue plan by 2030, but management calls it "a dream" and stresses that a proof of concept must come first; Phase 1 capex has begun, and rare earth import relaxations from China are awaited.
- Relay commercial ramp keeps slipping: Customer testing demands, driven by 10-year utility warranties, have pushed real volume sales to the middle of FY27, a year later than management's prior judgment.
- What to watch next quarter: Whether the new alloy furnace is installed on time in December, whether the U.S. customer's resumed orders hold, and whether the Chinese rare earth import approvals arrive to unlock Quantum Magnetics' assembly business.
Alloy: The H2 and FY27 Growth Driver
- Current state: The alloy segment is running at 100% capacity and already saw higher volumes in Q2 versus Q1, making it the bright spot in a quarter where overall revenue declined 12% YoY.
- Capacity expansion: A new furnace is expected to be installed by December, and management has confirmed that order visibility for the incremental capacity in Q4 already exists, allowing an immediate production ramp once the furnace is online.
- H2 revenue bridge: The delta needed to reach the ~INR120 crore H2 revenue target, from the current INR50 crore quarterly run rate, will come mostly from alloy, with the new furnace being set up across January through March.
- FY27 outlook: Management expects alloy revenue of approximately INR50 crores in FY27, with a mix of roughly 80% virgin material and 20% recycled; the broader alloy revenue range for FY27 is INR40 crores to INR70 crores.
- Margin drivers: Alloy margins depend on whether production uses virgin alloys or recycled materials, which serve different markets, making the segment's profitability mix-dependent.
Quantum Magnetics: The Rare Earth Magnet Ambition
- JV and capex underway: The joint venture agreement with Lorentic Pte Limited was executed in August, and the first phase of capital expenditure has started with equipment orders placed and some equipment already en route to the facility.
- Import relaxation as gatekeeper: The Chinese government has announced relaxations on rare earth supplies, and the company is awaiting import approvals; once received, manufacturing operations for the existing components business can commence.
- Phased roadmap: Phase 1 is a 500-ton pilot facility with capex of INR50-100 crores and revenue potential of INR300-350 crores; Phase 3, manufacturing the block itself in India, is targeted for sometime in 2027.
- The 2030 vision, with a caveat: The total plan envisions 5,000 tons of production and ~INR3,700 crores in revenue, requiring INR550-750 crores of investment, but management is still discussing funding structure and stresses that a proof of concept must be established first.
- Pricing strategy: The company will target only the higher-quality segment, not low-end products, and expects to mostly match Chinese prices there; customers are currently "very, very aggressive and keen to buy from non-Chinese source" due to geopolitical concerns, though management acknowledges this willingness could fade if supply chains normalize.
- Near-term assembly opportunity: Once import relaxations come through officially, the assembly business alone could contribute INR5-10 crores, with block cutting adding another INR20-30 crores.
Taparia: "Right now, it is too early, that is our plan, and then it's a dream to do that. We are right now in the phase of setting up and at least doing a proof of concept. So a lot of steps are yet to be crossed for that."
Relays: A Delayed but Still Material Opportunity
- The delay: Management's prior judgment was that relay sales would have already started, but customer testing has proven slower than anticipated because utilities demand 10-year warranties, pushing customers to perform elaborate testing on the product.
- Revised timeline: The relay facility is scheduled to become operational in Q4, but only trial orders are likely in Q4; real commercial larger-volume sales are now expected from the middle of FY27.
- Revenue expectations: Management is being conservative, guiding for FY27 relay revenue in the range of INR20-50 crores, with initial capacity set at 0.5 crore units per year established by March-April, to be scaled based on customer demand thereafter.
- Margin profile: Relay margins depend on the level of customization, making the segment's profitability variable with the product mix.
Taparia: "Our judgment last year actually, our judgment was that we should be already started selling, but customers are slower to take the product."
Q2 Performance: What Went Wrong
- Export hit from U.S. tariffs: Revenue declined 12% YoY in Q2 and 7% YoY in H1, primarily due to lower exports to the U.S. after recent tariff policy changes created uncertainty and led one U.S. customer to defer orders during the quarter.
- Domestic energy meter weakness: The domestic energy meter business recorded lower demand both YoY and sequentially, driven by customer-specific factors outside the company's control.
- Margin compression: EBITDA margins fell to around the 12% mark in Q2, with the reduction in higher-margin U.S. exports being a key drag; margins also vary by product segment, and the mix in any given quarter affects the headline number.
- Business resumption: The situation with the U.S. customer has since improved, with a resumption of business in recent months, suggesting the tariff-driven deferral was temporary rather than structural.
New Product Initiatives: Current Sensors and Beyond
- Standard current sensors launched: The company has introduced a range of standard current sensors for automotive applications, already supplying EV 2-wheelers and now in discussions with larger automotive players in India and other applications like UPS.
- Value proposition: The sensors are fully calibrated, allowing customers to use them directly on their PCB and eliminating the need for customers to design and test their own current sensor assembly; management says quality levels are similar to competitors but at a lower price.
- FY27 sales target: Standard current sensor sales could be in the range of INR2-5 crores in FY27, with the ambition to eventually compete with international players worldwide once success is demonstrated.
- Current transformer backward integration: The CT business has been growing, and the company has backward integrated to produce nanocrystalline and amorphous ribbon in-house, material that was previously mostly imported.
- Stator-Rotor pilot: The company is manufacturing stator-rotor assemblies for one automotive company's coolant pump application, still at the pilot stage, with management noting the market is quite big and they will proceed step by step.
Margins and FY26-27 Financial Outlook
- FY26 guidance maintained: Despite the soft Q2, management expects ~15% revenue growth for the full year, implying a top-line of INR220-230 crores, with EBITDA margins at similar levels to last year.
- FY27 growth ambition: Management is "quite optimistic" on growth prospects for FY27, guiding for 20-30% revenue growth, with upside possible if more alloy orders, EV orders, or relay orders materialize.
- Margin recovery expected: EBITDA margins are expected to return to the 16-18% range, similar to last year's levels, as the export mix normalizes and higher-capacity utilization in alloy contributes.
- Quantum Magnetics funding open: The company is still evaluating whether to fund the Quantum Magnetics investment through debt, equity, or a combination within the subsidiary, with no decision yet made.
- Government PLA scheme: A INR7,300 crore government scheme has been announced in the media, with details expected by December or January; the company intends to participate.
Taparia: "Next year, I would like to be conservative. I'm a little cautious that we don't know how much they were doing, but my expectation is maybe somewhere between INR20 crores to INR50 crores possibility is there."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Alloy furnace installation | New furnace installed and operational | December |
| FY26 revenue | ~INR220-230 crores (~15% growth) | FY26 |
| FY26 EBITDA margin | Similar level as last year | FY26 |
| FY27 revenue growth | 20-30% growth | FY27 |
| FY27 alloy revenue | INR40-70 crores | FY27 |
| FY27 relay revenue | INR20-50 crores | FY27 |
| Relay facility operational | Facility ready; trial orders supplied | Q4 FY26 |
| Relay commercial volume sales | Larger-volume commercial sales begin | Middle of FY27 |
| Quantum Magnetics assembly business start | Operations commence once import approvals received | Upon Chinese import relaxation |
| Quantum Magnetics Phase 1 production | Block cutting to magnet production go-live | FY26-27, around Q1 |
| Quantum Magnetics Phase 3 | Manufacturing the block itself in India | Sometime in 2027 |
| Standard current sensor FY27 sales | INR2-5 crores | FY27 |
Key Metrics
| Metric | Q2 FY26 |
|---|---|
| Revenue from operations | ₹49 cr, decline of 12% YoY |
| H1 FY26 revenue from operations | ₹102.7 cr, decline of 7% YoY |
| EBITDA margin | ~12%, declined from earlier quarters of 20%+ |
| FY26 revenue growth guidance | ~15% |
| FY26 full-year revenue guidance | ₹220 cr to ₹230 cr |
| FY27 revenue growth expectation | 20% to 30% |
| Revenue mix: energy meter | 37% of Q2 revenue |
| Revenue mix: automotive | 22% of Q2 revenue |
| Revenue mix: magnetic assembly | ~9% of Q2 revenue |
| Revenue mix: CT | ~10% of Q2 revenue |
| Revenue mix: alloy | 7% of Q2 revenue |
| Alloy segment FY27 revenue expectation | ₹40 cr to ₹70 cr |
| Relay segment FY27 revenue expectation | ₹20 cr to ₹50 cr |
| Quantum Magnetics assembly business revenue potential | ₹5 cr to ₹10 cr |
| Quantum Magnetics total plan by FY30 | 5,000 tons production, ~₹3,700 cr revenue, total investment ₹550 cr to ₹750 cr |