Key Takeaways
- Revenue surged 49% YoY, EV-led: Q2 FY27 revenue hit ₹72.5 crores, driven by a sharp pickup in EV segment demand from export customers and a recovery in the domestic smart meter business.
- Margins more than doubled YoY: EBITDA margin reached 25%, up from 14% a year ago, benefiting from a richer product mix tilted toward EV and positive operating leverage on higher throughput.
- Alloys teething issues resolved, H2 ramp ahead: The new furnace’s technical problems, which capped H1 utilization and forced penalty costs, are now fixed; management expects better capacity use and a full-year alloys revenue of ₹40–50 crores roughly.
- Quantum Magnetics Phase 2 is live, but revenue is a FY28 story: The block-cutting-to-surface-treatment line was commissioned in October 2026, yet FY27 revenue is doubtful because an international customer must still visit and approve the plant, and management has no clarity on whether it will happen this year.
- What to watch next quarter: Whether the alloys division converts its resolved capacity into the promised H2 revenue ramp, and any concrete customer forecasts for EV demand beyond the current “similar levels” judgment for H2 FY27.
EV Segment: The Quarter’s Engine
- Demand spike from a concentrated base: The EV revenue jump came from higher demand from two or three customers, particularly in the export market, where some previously deferred programs were revived and the customer began adopting the same platform for other products.
- Product application anchored in current sensing: Management’s judgment is that the product is mostly related to current sensing and goes into inverters; hybrid cars also use current sensing, so the product may be used there too.
- Near-term visibility, but no hard forecast: Based on current customer projections, EV demand is expected to remain at similar levels for the rest of FY27. For FY28, no specific forecast has been received, only a judgment that it should stay at similar levels.
- Western EV recovery is a belief, not a data point: Management believes Western manufacturers will adapt with lower-priced models and come back, but has no concrete data. Geopolitical entry barriers to Chinese EVs could determine whether that growth materializes.
Taparia: "The Western manufacturers are also adapting to this new situation. So, they are coming up with lower-priced models, and they are changing their product according to this new challenge given by the Chinese EVs. So, based on that, my belief is that they will come back. This is what my expectation is, but I do not have any concrete data right now to show this."
Alloys Division: Teething Troubles Give Way to H2 Ramp
- H1 held back by new furnace breakdowns: Full capacity of the new furnace could not be utilized in H1 FY27 due to teething issues, including technical problems attributable partly to the supplier and partly to PML’s own operations.
- Penalty costs incurred: Because of the delay in resolving the issues, PML is incurring certain costs it has to pay to customers.
- Issues resolved, utilization set to improve: Management stated the teething issues have been resolved and better utilization of the new furnace capacity is expected in H2 FY27.
- Order book intact, not lost: The order situation remains healthy; lost sales were pushed back, not cancelled, with orders received from oil and gas, industrial applications, and one or two small aerospace customers.
- FY27 revenue guided to ₹40–50 crores: Total turnover from the alloy business is expected in that range for FY27, with a possible increase to ₹70–80 crores in FY28 and much better overall margins next year. (Management stated FY27 total turnover is expected in that range, not H2.)
- Scalability strategy is margin-selective: The alloys business is very scalable, but management is deliberately avoiding products where Chinese competition makes margins very thin, focusing instead on products with suitable margins.
Taparia: "It's a very scalable business. We have to find products which have given us suitable margin. Sometimes, we are facing competition from China where the margin is very, very thin. So, those products, we don't want to get into."
Quantum Magnetics: Phase 2 Complete, Revenue Still Distant
- Phase 2 capex commissioned on time: The Phase 2 capex covering block cutting, machining, and surface treatment was commissioned in October, in line with the Q3 timeline previously shared.
- PLI incentive approved with conditions: Quantum Magnetics received approval under the ECMS scheme for PLI incentives, sanctioned at 25% of total capex, subject to conditions including completion of Phase 1 and Phase 2, employment conditions, and start of production.
- Customer approval is the gating item: The plant is now commissioned end-to-end, so the customer can evaluate stage-wise dimensional capability and statistical tolerances. However, an international customer must visit the plant for product approval, and management has no clarity on when that will happen.
- FY27 revenue doubtful: Management expressed doubt whether any revenue will be booked in FY27 because the company is still in the approval stage; it may get pushed to next year.
- Phase 3 decision waits on Phase 2 success: PML is working with one customer, building the product for them; once successful, it will commercially ramp up, then decide when to invest in Phase 3 (metal-to-block manufacturing). Management is not locking any equipment pricing now.
- Import dependence acknowledged, solutions undisclosed: Management confirmed that complications of import dependence and potential China restrictions exist, but said it has solutions it cannot disclose on the call.
Taparia: "I have a doubt whether we will be able to do anything because, again, we are still in the approval stage. We are pushing the customer to test our product and give us the approval. And the customer has to do visits. This is an international customer. So, they have to visit us, visit the plant, get the product approval. So, I don't know whether it may happen or it may not happen. Right now, I don't have that clarity."
New Product Pipelines: Relays, Modules, Water Meters
- Relays commercial ramp-up pushed to FY28: Pilot supplies are expected in H2 FY27, but the commercial ramp-up has moved to FY28 due to iterations of testing at the customer’s lab.
- Relays testing nearing end-stage: Management noted it had to do certain iterations and is now almost towards the end stage of testing for multiple products with multiple customers.
- No off-take agreements yet: In principle, customers are agreeing to buy, but no buying-selling agreements are in place yet; these are expected post successful testing.
- Automotive modules gaining traction: Some modules have started supplies to automotive, with sales also happening on international online platforms; that business has started this year.
- Water meter product in pilot stage: PML is developing one product, has supplied about 2,000–3,000 parts, and the customer is testing it; commercial supplies will start after testing is complete.
- Product strategy tilting toward standard modules: PML aims to introduce more standard products designed by PML and used across the industry, which will provide more stable, scalable business compared to current customer-specific products. All three new directions (modules, alloys, relays) have better scalability.
Margins & Mix: Operating Leverage Kicks In
- EBITDA margin jumped to 25%: The improvement from 14% YoY and 19% QoQ was driven by a better product mix due to higher EV demand and positive operating leverage from higher business throughput.
- Full-year margin guided to 20–25%: FY27 full-year EBITDA margin is expected to be in that range, a little bit lower than H1’s 25%.
- H2 revenue tilting domestic: The increasing alloy business sales, which are mostly domestic, will shift the revenue split toward domestic in H2.
- Plant consolidation to unlock cost savings: PML expects 2 more years before moving into a new facility; progress is good now after delays in legal matters on the land front. The move will save close to ₹5 crores per year in rent costs.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| EV demand | Expected to remain at similar levels based on current customer projections | Rest of FY27 |
| Alloys division utilization | Better utilization of new furnace capacity now that teething issues are resolved | H2 FY27 |
| Alloys division FY27 revenue | Total turnover in the range of ₹40 to ₹50 crores | FY27 |
| Alloys division FY28 revenue | Possible to increase to ₹70 to ₹80 crores | FY28 |
| Alloys division FY28 margins | Overall margins expected to be much better | FY28 |
| Overall FY27 growth | Total overall growth around 20% to 30%, aided by EV pickup despite relay commercial sales moving to FY28 | FY27 |
| FY27 full-year EBITDA margin | Expected in the range of 20% to 25% | FY27 |
| Relays pilot supplies | Pilot supplies expected | H2 FY27 |
| Relays commercial ramp-up | Moved to FY28 due to testing iterations | FY28 |
| Quantum Magnetics product approvals | Approval process expected to start soon with plant now commissioned end-to-end | No date (customer visit pending) |
| Quantum Magnetics commercial ramp-up | Should happen after Phase 2 success and customer approval | FY28 |
| Plant consolidation | Move into new facility, saving close to ₹5 crores per year in rent | ~2 years |
Key Metrics
| Metric | Q2 FY27 |
|---|---|
| Revenue | ₹72.5 cr, +49% YoY |
| EBITDA | ₹17.8 cr, +159% YoY |
| EBITDA margin | 25%, up from 14% in Q2 FY26 and 19% in Q1 FY27 |
| Automotive segment revenue | ₹24 cr, up from ₹15 cr in Q1 FY27 and ₹10.5 cr in Q2 FY26 |
| Export revenue share | 49%, domestic 51% |
| Full-year FY27 EBITDA margin guidance | 20% to 25% |
| Alloys division H1 FY27 revenue | ~₹12 cr |
| Alloys division full-year FY27 revenue guidance | ₹40 to ₹50 cr |
| Alloys division FY28 revenue potential | ₹70 to ₹80 cr, per management |
| Quantum Magnetics Phase 2 commissioning | Commissioned in October 2026, product approval process to start soon |
| Quantum Magnetics FY28 revenue range | ₹10 cr to ₹40 cr, per management judgment |
| Quantum Magnetics Phase 2 full-scale revenue potential | ₹40 to ₹60 cr from current capacity |
| Relays commercial ramp-up | Shifted to FY28, pilot supplies expected in H2 FY27 |
| PLI incentive under ECMS scheme | 25% of total capex, approved for Quantum Magnetics |
| Plant consolidation timeline | ~2 years to move into new facility, building capex ~₹30 cr, land cost ~₹25 cr |