Key Takeaways
- Volume-led beat with cost tailwinds: Sales volume surged 20% YoY against an industry growth of 4%, while a 5% YoY cost reduction lifted EBITDA per ton 32% to INR1,060 and margin to 19.2%.
- Acquired assets are the swing factor: Penna and Sanghi currently drag consolidated EBITDA below the standalone base business (~INR1,189/ton), but their integration is largely complete and a sharp ramp-up is promised from Q3.
- A quantified three-year cost-out plan is now on the table: Management committed to a stair-step exit cost trajectory from ~INR4,200/ton in September to INR4,000 by March '26, INR3,800 by FY27, and INR3,650 by FY28, powered by green power, logistics and operating leverage.
- The capacity engine is accelerating: The FY28 cement capacity target was revised up from 140 MTPA to 155 MTPA, with a debottlenecking program launched across 13 grinding units and three new kilns planned.
- What to watch next quarter: Whether Sanghi swings into a "very substantial positive zone" as guided, the pace of working capital improvement after a ~INR2,000 crore build in 1H, and any further project delays from weather disruptions.
Volume Growth & Market Position
- Outsized volume delivery: 20% YoY volume growth was achieved in both Q1 and Q2, driven by branding, marketing initiatives and increased dealer vibrancy that lifted customer preference for premium products. Excluding acquired assets, organic growth was 11% YoY, still well ahead of the 4% industry average.
- Market share gain: Consolidated market share rose 1% to 16.6%, with management targeting 20%–22% by FY28. Brand Track Research with IPSOS showed positive trends in top-of-mind awareness and a strengthening Adani brand association.
- Premiumisation in motion: Premium product volume grew 28% YoY and now represents 35% of trade sales, supporting a 3% price gain and reinforcing the sales promotion spend strategy.
- Growth sustainability: Management is bullish on double-digit growth for many quarters ahead, though the 20% rate may moderate as the acquired asset base matures and the base effect kicks in.
Bahety: "I think quite bullish to achieve double-digit growth may not be 20% when the acquired assets mature and therefore, the base goes up. But surely double-digit growth is what we are targeting on strength of the strong brands what we have with top of it, now the Adani brand also getting shipped into it."
Cost Reduction & Margin Trajectory
- The cost exit roadmap: Management laid out a quantified, multi-year cost reduction plan: exit FY26 at ~INR4,000/ton (a 5% reduction from the September exit of ~INR4,200), then INR3,800/ton by FY27 exit, and INR3,650/ton by FY28 exit.
- Kiln fuel advantage: Kiln fuel cost fell to INR1.65 per 1,000-kcal (INR1.60 including AFR), contributing INR238/ton of YoY cost improvement. Management is optimistic about sustaining low coal costs in Q3, having built 2–3 months of inventory at lower prices.
- Logistics efficiency: Logistics cost dropped nearly 7% YoY to INR1,224/ton, with primary lead distance reduced by 2 km to 265 km. A further 50 km reduction is expected as grinding unit geography expands.
- Green power as a structural lever: Green power share reached 33% in Q2, up 14.3 percentage points. RE capacity is expected to hit ~900 MW by FY26 end and 1,122 MW by FY27, driving power cost down from INR6 to INR4.5 per unit by FY28 and contributing INR250 of the INR400/ton cost reduction targeted by FY28.
- New asset efficiency: New clinkering lines will operate at 680 kilo-calories of heat consumption versus 730–740 for existing assets, and at under 50 units/ton of power versus over 60 units/ton, improving the fleet average as they commission.
- Other expense control: Other expenses fell INR62/ton QoQ to INR712, aided by synergies, efficiency gains, and a shift toward more cost-effective digital media in branding spend.
Bahety: "Exit of FY '26, we are targeting to deliver total cost of ~ INR4,000 per metric ton, which is 5% reduction from current levels of ~ INR4,200. The exit of September has been ~ INR4,200 cost per ton, which I'm targeting to deliver at INR4,000 by March '26."
Acquired Assets: Integration & Ramp-Up
- Integration largely complete: Maintenance of acquired assets (Penna, Sanghi) is largely finished, and their entire sales are now under Ambuja and ACC brands, with sharp profitability improvement already visible at these companies.
- Current drag, promised swing: Excluding acquired assets, EBITDA was ~INR1,189/ton. Penna and Sanghi currently deliver lower EBITDA, but management expects them to approach four-digit EBITDA as capacity utilization improves. Sanghi is specifically expected to swing into a "very substantial positive zone" from Q3.
- Demand tailwinds for acquired assets: A healthy uptick is visible in the Western market where Sanghi operates, and a positive uptick in Southern markets where Penna assets are located. Orient caters to high-contribution markets like Mumbai.
- Sanghi's inherent potential: Sanghi has a rated clinker capacity of 0.65 crore tons with an in-built debottlenecking cushion to produce 0.75 crore tons, and management believes it has the potential to become one of the lowest-cost clinker producers.
- Utilization trajectory: Consolidated capacity utilization sits at 65%–67%, with base assets above 75%. Sanghi utilization was depressed by torrential rains in Q2 but is expected to move to the 65%–70% range in Q3 and Q4.
Bahety: "Even if I expect it to achieve 4 digits, we see a very healthy improvement in terms of the EBITDA to sustain 4 digits and then to grow from there."
Capacity Expansion & Debottlenecking
- Revised ambition: The FY28 cement capacity target was raised from 140 MTPA to 155 MTPA, with the clinker target moving from 8.4 crore tons to 9.6 crore tons. Capacity is set to grow 10%–15% annually: 10.7 crore tons currently, 11.8 crore tons by FY26 end, ~13–13.5 crore tons by FY27, and 15.5 crore tons by FY28.
- Debottlenecking program launched: Phase 1 covers 13 cement grinding locations, with 13 blenders to be installed over 12 months. Logistics debottlenecking alone is expected to unlock 3% of capacity utilization. Clinical debottlenecking studies are also underway on the current 6.5 crore tons of clinker capacity.
- Near-term commissioning: Trial runs have started at the Bhatapara clinker line (0.4 crore tons), and the Krishnapatnam grinding unit has commenced operations, taking that site to 0.4 crore tons. Penna Marwar light-up is expected this month.
- Project delays flagged: Six projects (Bathinda, Bhatapara, Maratha, Salai Banwa, Jodhpur, Krishnapatnam) show a one-quarter delay versus the prior quarter's slide, attributed to torrential rains and flood-like situations. Commercial production is expected before Q4, with no unreasonable delay seen.
- Fleet modernisation: The average plant age will reduce by 40% by FY28 through new expansion plants. One or two older assets may be mothballed, described as insignificant in the overall scheme. Wadi Line 1 has already been stopped and dismantled.
Digital, Sustainability & Other Initiatives
- CINOC launched: The Cement Intelligent Network Operations Center will embed AI across business operations, targeting efficiency, productivity and deeper stakeholder engagement. Marginal improvements are expected in coming quarters, with real benefits beginning next financial year after a foundation revamp of at least two quarters.
- Sustainability milestones: SBTi validation was received for near-term and long-term targets. A strategic partnership with CONCOR was signed for tank container movement supporting net-zero commitments. An MOU with Coolbrook of Finland is progressing well. Green power share is on a path to 60% by FY28.
- Carbon credit opportunity: Management estimates INR200–225 crores of additional income when the carbon credit framework matures, at a rate of $8–10 per ton.
- RMC ramp-up: The RMC business is ramping well with healthy EBITDA margins. Cement consumption in RMX is currently ~2%, targeted to reach ~5% by FY28, with roughly 365 RMX plants planned in the next couple of years.
- People & productivity: Approximately 1,300 graduate and diploma trainees are nearing completion of a one-year structured training program. Adani Cement's HR cost per ton is described as one of the most efficient among peers, with further productivity gains expected as digitisation scales.
Bahety: "AI will run deep into our enterprise fabric, bringing efficiency, productivity and deeper engagement with the stakeholders across the value chain."
Balance Sheet & Working Capital
- Working capital build: ~INR2,000 crores was added in 1H, driven by higher receivables from increased non-trade/B2B sales in the monsoon quarter, higher finished goods and clinker inventory, higher stores and spares, and 2–3 months of coal inventory built at lower prices. Strong improvements are planned in Q3.
- Cash movement: Cash declined from INR2,971 crores in June to INR1,813 crores in September, majorly driven by a ~INR1,400 crore capex outlay in Q2 for projects commissioning in Q3 and Q4. A complete line-by-line bridge for the June-to-September period was not provided.
- Credit profile maintained: CRISIL AAA Stable and short-term A1 plus ratings were reaffirmed.
- Profit after tax: INR2,302 crores, up 364% YoY, including a one-time INR1,697 crores tax write-back. Even excluding that, a substantial improvement was recorded.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Cost exit rate | INR4,000/ton (from ~INR4,200 September exit) | March '26 |
| Cost exit rate | INR3,800/ton | March '27 |
| Cost exit rate | INR3,650/ton | March '28 |
| Cement capacity | 11.8 crore tons (~1.12 crore tons added in FY26) | FY26 end |
| Cement capacity | 15.5 crore tons | FY28 |
| Clinker capacity | 9.6 crore tons | FY28 |
| Green power share | 60%, power cost at INR4.5/unit | FY28 |
| EBITDA per ton | INR1,500 | FY28 |
| Market share | 20%–22% | FY28 |
| Sanghi utilisation | 65%–70% range | Q3 and Q4 FY26 |
| Volume growth | Double-digit (not necessarily 20%) | Next many quarters |
| RMC cement consumption | ~5% of total | FY28 |
| Carbon credit income | INR200–225 crores additional | When framework matures |
| Digital/AI benefits | Real improvements begin | Next financial year |
Key Metrics
| Metric | Q2 FY26 |
|---|---|
| Revenue | ₹9,174 cr, up 21% YoY |
| EBITDA | ₹1,761 cr, up 58% YoY |
| EBITDA margin | 19.2%, up 4.5 ppt YoY from 14.7% |
| EBITDA per ton | ₹1,060, up 32% YoY |
| Profit after tax | ₹2,302 cr, up 364% YoY; includes one-time tax write-back of ₹1,697 cr |
| Earnings per share | ₹7.2, up 267% YoY |
| Net worth | ₹69,493 cr, up ₹3,057 cr QoQ |
| Sales volume | 1.66 cr tons, up 20% YoY; highest ever for a Q2 |
| Volume growth excluding acquired assets | 11% YoY, 2.5x the industry average of 4% |
| Market share | 16.6%, up 1 ppt |
| Total cost per ton (exit September) | ~₹4,200; target ~₹4,000 by March 2026 |
| Kiln fuel cost (excluding AFR) | ₹1.65 per 1,000-kilo calories, lowest among peers |
| Kiln fuel cost (including AFR) | ₹1.60 per 1,000-kilo calories, down 2% |
| Logistics cost per ton | ₹1,224, down 7% YoY |
| Primary lead distance | 265 km, down 2 km YoY; target another 50 km reduction |
| Premium products share of trade sales | 35%; premium cement volume up 28% YoY |
| Green power share | 33%, up 14.3 ppt |
| Renewable energy capacity | 673 MW; target 900 MW by FY26 end, 1,122 MW by FY27 |
| Consolidated capacity utilization | 65%–67% |
| Base capacity utilization | Upwards of 75% |
| Current cement capacity | 10.7 cr tons; target 11.8 cr tons by FY26 end, 15.5 cr tons by FY28 |
| Current clinker capacity | ~6.5 cr tons; target 9.6 cr tons by FY28 |
| Debottlenecking capacity addition | 1.5 cr tons, at capex of $48 per ton on integrated basis |
| Logistics debottlenecking unlock | 0.3 cr tons (3% of current capacity), over 24 months |
| RMC cement consumption | ~2% of total cement; targeting ~5% by FY28 |
| Dealer network | ~29,000 dealers, 50,000–60,000 retailers, ~7 lakh contractors |
| Average employee age | 38 years |
| Net debt position | Debt-free; CRISIL AAA Stable / A1+ ratings |