Key Takeaways
- Volume engine intact, margin optics messy: Volume grew 16% against 15% guidance, but an 8% volume-value gap from low polymer prices and ~₹40 cr in one-off costs compressed reported EBITDA.
- Gross margin at peak, not a new floor: Gross margin hit 40.5%, the top of the 36%-40% band; management is comfortable letting it drift down ~2% to chase volume rather than defend this level.
- New ventures are in investment mode: Paints EBITDA halved to 10% on launch costs, bathware is near breakeven, and three new plants are ramping up, all loading staff costs before revenue.
- Raw material volatility is now structural: Polymer price swings have moved from 1%-3% pre-COVID to 10%-20%, creating quarterly lumpiness that management says favours cash-rich players like Astral.
- What to watch next quarter: Whether the promised H2 mix shift to CPVC and value-added products actually narrows the volume-value gap, and whether PVC prices stabilise enough to avoid inventory losses.
Volume-Value Disconnect
- The 8% gap explained: Q1 is seasonally loaded with lower-value PVC products, and polymer prices were substantially lower YoY. New plants in Guwahati and Cuttack also sell more PVC, widening the gap versus peers. Management expects the gap to narrow as CPVC mix rises through the year.
- June price pass-through failed: PVC prices rose substantially in June but no industry player passed it through, partly because distributors needed 1-2 weeks to manage inventory and it was quarter-end. Then July saw prices drop again as traders offloaded lower-cost inventory.
- Realisation trajectory: Q1 realisation is always the annual trough; each sequential quarter improves, with Q4 at peak. Even if polymer prices stay flat, full-year realisation improvement will be more than 1%-2% YoY.
- Inventory loss risk: Management sees no inventory losses at this stage, but acknowledges probability exists if polymer prices fall further from here.
Hiranand Savlani: "One quarter will not be the right method to do the evaluation on all the parameters, somewhere top line will be there. Volume will be missing, EBITDA will be high, EBITDA will be low. This kind of things will keep happening on a quarter-on-quarter basis."
Margin Walk & One-Off Costs
- Gross profit to EBITDA leakage: Gross margin hit an all-time high of 40%-plus, but employee costs and other expenses rose, preventing full conversion to EBITDA. Staff cost looks elevated because top-line growth was depressed by lower polymer prices, and new verticals and plants carry staff costs without revenue yet.
- One-off cost stack: ~₹20 cr on branding, advertisement and exhibitions from ICC cricket and IPL falling in the same quarter, plus another ~₹20 cr on events that coincided. These are contractual obligations, not a recurring quarterly pattern.
- Branding strategy shift: Astral has moved out of the brand ambassador model and TV ads, focusing instead on on-ground activity and cricket. No major such events are planned going forward.
- Full-year cost normalisation: Management commits that employee cost and other expenses will be in line with last year's percentage margins (7.8% and 14.6% of sales respectively) on a full-year basis, though percentages can rise if resin prices fall.
Sandeep Engineer: "In short what we would like to communicate very clearly is that if there are challenges coming up in the polymer, we will be accordingly taking care to see that by year-end, we fall in the right number and which if need be, we'll start working and correcting from quarters, whether it is the other expense, whether it is the branding expense or whether any other expenses are there."
New Ventures: Paints, Bathware & OPVC
Astral Paints
- Launch status: Launched in Gujarat a month back with 40 big dealers already stocking and selling; opening Rajkot, Baroda and Surat this month, North Gujarat in 1-2 months. Two more states to open in the next two months, then consolidation in the Western Zone before moving to the Southern region where Gem is present.
- Margin trajectory: EBITDA margin dropped from 17% to 10% due to launch costs (dealer meets, new staff), though gross margins were maintained. Management targets minimum 10% EBITDA margin for the full year and at least 15% volume growth from last year's level.
Bathware
- Scale and profitability: Net sales target of ₹100-125 cr for this fiscal. EBITDA loss is "very, very, very low" but exact numbers are now impossible to isolate because plumbing fittings with brass elements have been clubbed with the plumbing business. No capex planned for bathware this fiscal; existing capacity is sufficient.
OPVC
- Technology and launch: Indigenous technology jointly developed with an undisclosed technical partner; no license fees or royalties. Three machines lined up for October, November and December, with initial capacity of ~7,000-8,000 metric tons. Commercial production expected by November or possibly October-end.
- Scale-up optionality: If response is good, capacity can be expanded very quickly. Gross margin details will be shared only in Q4 after costing and competitive pricing are assessed.
Sandeep Engineer: "We would help to trust and give us time, but we'll not derail anywhere in the business. We would not burn our capital behind the business. We will not show capital behind the capex here without understanding. And we will always be in a positive mode on growth and margins and keeping margin intact at a level we will keep growing the same."
Capacity Expansion & Capex
- Plant commissioning timeline: Guwahati is fully operational; Hyderabad trial runs are ongoing with commercial production starting late August 2024; Ghiloth fitting plant starts production September 2024 with 22 injection moulding machines in Phase 1; Dholka expansion adds pipe machines from October 2024; Kanpur construction starts end of this month.
- Faucets plant: Acquired a plant at Jamnagar on an asset-value basis with no brand value paid, bringing good capacity and product line.
- Full-year capex: Guidance around ₹350 cr for the full year. Current plastic piping capacity is ~3,34,000 metric tons; year-end capacity figure was not provided.
Segment & Subsidiary Performance
| Segment | Trend | Commentary |
|---|---|---|
| Adhesives (India) | ▲ Strong | 14% growth while industry was slow; 16% EBITDA margin maintained. Gross margin improved to 45% from ~43% YoY. Targeting 15%-20% growth with similar margins for the balance nine months. |
| Adhesives (UK) | ▼ Weak | Negative growth due to elections and slower geography; normalcy expected from Q3. Full-year target: 8%-10% growth, 7%-8% minimum EBITDA margin. |
| Paints | ▼ Investment phase | EBITDA margin halved to 10% on launch costs; gross margins maintained. Double-digit margin targeted for full year. |
| Bathware | ▬ Building scale | ₹100-125 cr net sales target for FY25; near-breakeven EBITDA. No capex planned. |
Raw Material & Pricing Environment
- Structural shift in volatility: Pre-COVID polymer and chemical price volatility was 1%-3%; it is now 10%-20%. Management frames this as favourable for bigger, cash-rich companies and painful for smaller ones.
- PVC price dynamics: PVC was substantially lower YoY in Q1 and Q2, picking up only in June. The INR14-15 up move in one month followed by INR11-12 down the next is unprecedented in many years, disrupting the normal 7-10 day pass-through cycle.
- CPVC outlook: From September onwards, prices should start moving up. BIS norms and anti-dumping duty on PVC may arrive in Q3, supporting polymer prices.
Sandeep Engineer: "In the long run, it's good for a bigger and cash-rich companies and very painful for smaller companies."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Volume growth | 15%-plus; could reach 16%-20% in peak quarters | Full year FY25 |
| India Plumbing EBITDA margin | 16%-18% | Full year FY25 |
| India Adhesives EBITDA margin | 14%-16% | Full year FY25 |
| Adhesives India growth | 15%-20% | Full year FY25 |
| Adhesives UK growth | 8%-10% | Full year FY25 |
| Adhesives UK EBITDA margin | 7%-8% minimum | Full year FY25 |
| Paints EBITDA margin | Minimum 10% | Full year FY25 |
| Paints volume growth | At least 15% from last year's level | Full year FY25 |
| Bathware net sales | ₹100-125 cr | Full year FY25 |
| Employee cost / Other expenses | In line with last year's percentage margins (7.8% and 14.6% of sales) | Full year FY25 |
| Capex | ~₹350 cr | Full year FY25 |
| UK operations normalcy | Return to normal growth | From Q3 FY25 |
| Cost normalisation | One-off costs to normalise over the next 9 months | Full year FY25 |
| Realisation improvement | More than 1%-2% YoY | Full year FY25 |
Key Metrics
| Metric | Q1 FY25 |
|---|---|
| Consolidated revenue growth | 8% YoY |
| Volume growth | 16%, against guidance of 15% |
| Gross profit margin | 40.5%, all-time high; normal range 36% to 40% |
| Plumbing revenue | ₹1,013 cr, +8% YoY from ₹938 cr |
| Plumbing EBITDA margin | 17.94%, including other income |
| Adhesives India revenue | ₹240 cr, +14% YoY from ₹210 cr |
| Adhesives India EBITDA margin | 16%, flat YoY |
| Adhesives India gross margin | 45%, vs 43% in Q1 FY24 |
| Adhesives UK revenue | ₹89 cr, -5% YoY from ₹94 cr |
| Adhesives UK EBITDA margin | 2.5%, vs 8% in Q1 FY24 |
| Paints revenue | ₹42 cr, +4.5% to 5% YoY from ₹40 cr |
| Paints EBITDA margin | 10%, vs 17% in Q1 FY24; includes ₹2.5–3 cr launch spend |
| Bathware revenue | ~₹26 cr, +90% YoY |
| One-time branding, advertisement and exhibition costs | ~₹20 cr, from ICC and IPL events converging in Q1 |
| Full-year capex guidance | ~₹350 cr |
| Full-year volume growth guidance | 15%-plus, maintained |
| Full-year Plumbing EBITDA margin guidance (India) | 16% to 18% |
| Full-year Adhesives EBITDA margin guidance (India) | 14% to 16% |
| Current plastic piping capacity | ~3,34,000 metric tons |