Key Takeaways
- New business model goes live, margin story stays vague: Q1 FY26 is the first quarter under the Meritor arrangement. Management promises a marginal EBITDA improvement but repeatedly declined to quantify it, asking investors to wait until Q3 for clear visibility.
- Revenue flat, exports hit by a timing issue: Revenue was close to ₹498 crores, roughly flat YoY, but export revenue could not be recognized in Q1 due to Incoterms under the new model. This is purely a timing issue that normalizes from Q2.
- Q2 demand warning: Management flagged that Q2 will be much lower than initially anticipated because OEMs built surplus inventory ahead of the AC cabin change and an early, above-average monsoon is reducing freight movement.
- Capex approved, benefits distant: The board approved ~₹120 crores for capacity, capability and automation. Phase 1 benefits arrive only in late Q1 FY27, and Phase 1a commissions by December 2026.
- What to watch next quarter: Whether export revenue recognition normalizes as promised, the actual magnitude of the Q2 demand dip, and any quantification of the new model's margin benefit as the arrangement seasons.
New Business Model with Meritor
- Structure: A service fee is now paid to Meritor for marketing, product development and engineering support, scientifically assessed by two professionals at arm's length as a fixed percentage of revenue from domestic OE sales. Management declined to disclose the percentage or absolute amount.
- Revenue recognition disruption: Exports were made but could not be recognized in Q1 because Incoterms under the new model differed. This is a timing issue that will normalize from Q2, though the recognition point will take 3–4 months to fully season depending on the Incoterms agreed.
- Other expenses jump: Q1 other expenses were around ₹75 crores, which includes the technical fee paid to MHVSIL. Management guided this line should settle around 12%–13% of revenue going forward but said Q3 onwards may show reasonable normalcy as the new model beds in.
- Export margin advantage: Exports to Cummins entities do not carry the fee structure, so theoretically export margins could be in the mid-teens, though the North America market is already 50% down and direct export exposure to US tariffs is small.
- Investor pushback on value accretion: When asked directly about the value addition flowing to the listed entity and the shareholder rejection of an earlier proposal, management acknowledged the question but declined to quantify the benefit, citing varying product mix and changing export/domestic mix quarter-on-quarter.
Nagaraja: "We appreciate you bringing it up. And I think we owe you an answer... The challenge for us is putting it up because of the various product mix and then the mix between the exports and domestic sales, which is changing so drastically quarter-on-quarter. We are not able to put an absolute number."
Demand Environment
- Q1 volume softness: Volume was about 5% down versus the same quarter last year, driven by OEMs building surplus inventory due to the AC cabin changeover and the onset of monsoon season. The inventory impact is expected to subside.
- Q2 warning: Management explicitly flagged that Q2 will be much lower than initially anticipated because of two temporary factors: the OEM inventory overhang from the AC cabin change and above-average monsoon reducing freight movement.
- H2 recovery bet: Q3 and Q4 are expected to recover as government infrastructure programs kick in after the monsoon. Management is optimistic the market will be at ₹400 crores or plus/minus 3%–4%.
- Full-year industry view: Overall industry production is projected 4% lower than last year, but management characterizes this as still a strong market. Historically, after two stable years the industry saw 15%–20% dips, but the last three years have been stable around 400,000 units.
- Mix shift underway: Higher-tonnage vehicles in the 50–55 ton range are growing, which carry higher per-axle realization because of more metal, more content and more technology. Bus volume has also increased from a ~40,000 average to consistently 70,000–80,000 over the last 3–4 years, driven by the COVID deficit catch-up and push from state transport units.
Nagaraja: "I would say that we need to wait for at least another quarter to clear all the confusion with the tariffs and everything... We think that it will be slightly -- it will be flat or slightly lower compared to last year. But unless something goes drastically wrong, we should be putting in a good performance."
Margins
- Q1 profitability inch-up: EBITDA improved to 11.7% from 11.2% (up 0.5%), and PAT improved to 7.3% from 6.9% (up 0.4%–0.5%). Cost reduction and automation initiatives are slowly yielding improvement.
- Gross margin mix effect: Q1 gross margin improved partly because the new 18TG product saw slightly higher volumes, and partly because export revenue was not recognized, which skewed the mix favorably.
- New model margin promise: Management committed that there will be a marginal improvement in EBITDA margin from the new arrangement, with no deterioration. The benefit will be more visible in absolute numbers than in percentage terms, and clear visibility is expected only by Q3.
- Pricing pressure constant: OE pricing pressure is described as consistent and continuous for Tier 1 and Tier 2 suppliers, a structural feature of the automotive supply chain.
Sankaran: "100%. 100% margin is protected. I mentioned earlier also and Nagaraj also reinstated that. This new arrangement, definitely there will be a marginal improvement on the margins."
Product & Capacity Developments
- New bus platform win: The company will supply axles for 13.5-meter and 15-meter buses from Q3 onwards for a customer, a new platform launch with no existing supplier. Volumes are low as it is a launch program, and the customer's aggressive launch plan must still pass the test of market acceptance.
- 9-meter segment in pipeline: Business discussions and commercials are ongoing with the customer; specification and design are finalized. Management hopes to close commercials in Q2.
- New product in development: A new product is being fine-tuned to meet changing customer applications. A prototype is expected by the end of this year, with actual start of production with OEs to be determined.
- Capex plan: The board approved ~₹120 crores for capacity, capability, equipment replacement and automation. Phase 1 completes by the end of this financial year with benefits from late Q1 FY27; Phase 1a commissions by December 2026.
- Casting vertical integration ruled out for now: Management is looking at increasing value-add within the manufacturing footprint but sees casting as a different animal. Current focus is on automation and new technology rather than adding commodities that can be bought more economically.
Kishan Kumar: "The volumes are pretty low as it is a launch program and it may not impact our overall share of business significantly with this customer. And over a period of time, the customer has an aggressive launch plan, but that has to be realized only after the market acceptance of the product."
Competitive & Structural Position
- American Axles competition persists: American Axles, now taken over by Bharat Forge (a Kalyani Group partner), continues to be a competitor. This has been the case for at least 10 years and will continue.
- Export strategy unchanged: The company does not do direct sales to end customers outside India; it supplies to its own entities who interface with end customers. This strategy is not expected to change in the near future.
- Tata Motors opportunity: Management is continuously exploring opportunities with OEs and wants to strengthen the relationship on brakes first, then pursue anything add-on.
- MHVSIL sourcing commitment: Any product Automotive Axles manufactures for domestic OEs, MHVSIL sources only from Automotive Axles. Other parts sold by MHVSIL are other makes. Management declined to discuss MHVSIL's outside sales of ₹300–400 crores, calling it not compliant to go beyond Automotive Axles' scope.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Export revenue normalization | Export revenue recognition issue resolves as per new model's revenue recognition policy | From Q2 FY26 |
| Q2 demand dip | Q2 will be much lower than initially anticipated due to OEM inventory surplus and above-average monsoon | Q2 FY26 |
| H2 market recovery | Market recovers to ~₹400 crores or plus/minus 3%–4% as government infra programs kick in | Q3 and Q4 FY26 |
| Margin visibility from new model | Clear visibility of margin improvements from the new arrangement | By Q3 FY26 |
| Other expenses normalization | Reasonable normalcy in overall financials under the new model | Q3 FY26 onwards |
| New bus platform supply | Axles supplied for 13.5-meter and 15-meter buses | From Q3 FY26 |
| 9-meter segment commercial close | Commercials closed for the new development | Q2 FY26 |
| Capex Phase 1 completion | Capacity, capability and automation projects completed; benefits flow | End of FY26; benefits from late Q1 FY27 |
| Capex Phase 1a commissioning | Further capacity and automation commissioned | December 2026 |
| New product prototype | Prototype ready for a new product being fine-tuned for changing customer applications | End of calendar 2025 |
| Full-year industry production | Industry production projected 4% lower than last year | FY26 |
| Full-year company performance | Flat or slightly lower compared to last year, barring something drastically wrong | FY26 |
Key Metrics
| Metric | Q1 FY26 |
|---|---|
| Revenue | ₹498 cr, approximately flat YoY; revenue from operations 1% lower YoY |
| EBITDA margin | 11.7%, up 0.5 ppt YoY from 11.2% |
| PAT margin | 7.3%, up 0.4–0.5 ppt YoY from 6.9% |
| Other expenses | ₹75 cr, includes technical fee paid to MHVSIL under the new model |
| Other expenses guidance | 12–13% of revenue, expected to normalize from Q3 FY26 onwards |
| Gross margin | Improved YoY, driven partly by new product 18TG volume pickup and export revenue not recognized |
| Export revenue recognition | Deferred in Q1 due to Incoterms timing; recognition to begin from Q2 FY26 |
| Domestic OE service fee | Percentage of revenue, payable to MHVSIL on domestic OE sales under arm's-length arrangement |
| New model EBITDA impact | Marginal improvement expected, visible more in absolute numbers than percentage; full-year view needed |
| Industry volume outlook FY26 | ~400,000 units, dip of around 4% YoY; Q2 expected lower due to OEM inventory buildup and monsoon |
| Bus segment volume | 70,000–80,000 units annually in recent years, up from ~40,000 historical average |
| Capex approved | ₹120 cr for capacity, capability, equipment replacement and automation, to be spent over FY26 and FY27 |
| Phase 1 capex completion | End of FY26, benefits to start in early FY27 |
| Phase 1a capex completion | December 2026, commissioning by Q3 FY27 |
| Q2 FY26 volume vs Q2 FY25 | ~5% lower YoY, due to AC cabin changeover inventory and monsoon impact |