Key Takeaways
- Volume-led quarter, mix shift masked growth: Revenue grew ~22% QoQ as post-GST demand converted, but the headline 6% YoY growth trailed the 17% M&HCV industry growth because of a 5–15% export decline and a bus-segment mix gap where the company is underweight.
- New product cycle is converting: The MS185 axle, positioned 12–18 months ahead of demand, is now a material volume driver alongside the 394 brake and new bus axle, and management says COGS improvement from these lighter designs will continue for 2–3 years.
- No wallet-share loss with the anchor customer: Delivery performance ran north of 97–98%, the company is 100% present on Ashok Leyland’s new launches, and management pushed back explicitly on any market-share erosion in on-highway.
- Export and non-MHCV drag is structural this cycle: Exports dropped 5–15% and the off-highway/defense/export bucket stays at 15–25% of revenue, so the M&HCV-only growth rate is on par with the industry even when the consolidated number looks soft.
- What to watch next quarter: Whether Q4’s expected 5–10% industry volume growth lifts revenue proportionally or mix (bus, tipper, export) dilutes it again, and any clarity on the October 2026 low-floor bus regulation that could open a new axle mandate.
Demand & Volume Conversion
- Post-GST traction: After September’s GST rate cuts, demand from nearly every OEM partner picked up, turning the quarter into a strong volume period after a slow start.
- Conversion capacity exists: The company had both the product availability and the capacity to absorb the 10–15% sequential upturn; current utilization is around 80%, and management says capacity was not a binding constraint on revenue.
- Tipper softness a drag: A slowdown in the tipper segment weighed on overall revenue, though tipper axles and MS185 together made up a good percentage of the last month’s production.
- Heavy-duty shift is structural: The migration from tandem and multi-axle configurations into tractor-trailers is here to stay, but where it peaks is uncertain, and that shift changes the axle mix the company supplies.
Kishan Kumar: "The shift in the heavy-duty or high tonnage vehicles, multi-axles into tractor trailer, tandem into tractor trailer, that's going to stay. Now where will it reach as a peak? That's anybody's guess today."
Product Mix & New Launches
- MS185 now a volume driver: The product was anticipated in 2022, ready 12–18 months before demand materialized, and is now described as “the hot cake” required by the industry.
- Three new products with the key customer: The 175 axle, 180 axle, and bus axle were introduced; the 394 brake entered production at end-December and is expected to replace some existing volume as the next trend.
- Bus axle mandate creates an opening: From October 2026, all 9-plus-meter city buses must be low-floor (400 mm floor height). The company’s current axle line mostly meets that spec, but management is still assessing whether a completely different architecture will be required. Expected penetration with the largest OEM is 3–5% of that OEM’s bus portfolio.
- Mix shift was anticipated: The upturn brought a product-mix change versus prior years, which management had expected and which operational efficiency helped convert.
Kishan Kumar: "2022, we anticipated the MS185, which is the hot cake now that is required for the industry, and we had started all our work on that. And the product was ready at least 12 to 18 months before the demand."
Revenue Growth vs. Industry: The Gap Explained
- The 6% vs. 17% disconnect: Consolidated revenue growth lagged M&HCV industry growth primarily because of a 5–15% drop in export revenue and the company’s underweight position in the bus segment, where industry volume grew strongly.
- M&HCV-only growth is on par: If the 15–25% of revenue from non-MHCV segments (export, defense, off-highway) is stripped out, the company’s M&HCV growth rate matches the industry.
- Bus segment is the mix gap: When bus volume rises, the company gets impacted because it historically lacked a competitive bus axle, which is why the new bus axle launch is strategically important.
- No capacity or share loss: Management explicitly stated it did not lose market share with Ashok Leyland or other on-highway customers, and delivery performance was 97–98%, so the growth gap is mix-driven, not competitive.
Costs, Margins & the Technical Fee
- COGS improvement trend: Raw material is 70%+ of cost, and the company has improved COGS over the last 2–3 quarters through supply-chain optimization and lighter, innovative designs. This trend is expected to continue for the next 2–3 years as high-performance products scale.
- Other expenses jump is mechanical: The ~₹21 crore QoQ increase in other expenses (to over ₹81 crore) is almost entirely the technical fee paid to Meritor, which is a percentage of revenue. Since revenue grew ~22% sequentially, the fee grew proportionally; this arrangement did not exist in the prior year.
- Product mix protects margins: Management flagged product mix as a critical factor in sustaining margins, and the shift toward newer, higher-technology axles supports that.
Competitive Position & OEM Dynamics
- Anchor customer relationship is locked in: The company is 100% present on every new launch with Ashok Leyland and supplies the full axle or axle kits, meaning the full content at the vehicle level belongs to the company.
- OEM in-sourcing is not a threat: Globally, OEMs are moving away from axle manufacturing; management cited discussions in Europe and North America where OEMs are asking the company to supply axles, including to their own designs. In India, OEMs do not pick components from different suppliers and assemble themselves.
- Competitive landscape: The largest competitors are captive OEMs (Tata Motors, Eicher) that build their own axles. Among independents, competitors include Brakes India (in brakes), Dana, American Axle, and some small off-highway players.
Kishan Kumar: "Globally OEMs are actually moving away from doing anything to do with axle. So we have examples in Europe and North America where discussions are going on where OEMs are asking us do our axles, even including their own design, right?"
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Q4 revenue direction | Q4 expected to be better than Q3; industry volume growth of 5–10% YoY, revenue dependent on product mix | Q4 FY26 |
| Capacity expansion | Capacity will be completely improved to meet peak demand for the next 3 years | By Q3 FY27 |
| COGS improvement | Trend of COGS improvement to continue as high-performance, high-technology products scale | Next 2–3 years |
| Bus axle regulation readiness | Current axle product line mostly meets the 400 mm floor-height requirement; company still assessing if a different architecture is needed | Regulation effective October 2026 |
| Non-MHCV revenue range | Export and off-highway business expected to remain in the 15–25% band | Ongoing |
| Next-generation axle localization | When average vehicle horsepower moves from 200 to 350–400, next-gen high-efficiency axles will be required; global products available but not yet localized | When market is ready (undated) |
Key Metrics
| Metric | Q3 FY26 |
|---|---|
| Revenue | ₹562 cr, +6% YoY and +21% QoQ |
| Total income | ₹570.9 cr, including other income |
| EBITDA | ₹72.5 cr, +14% YoY and +26% QoQ |
| EBITDA margin | 12.9%, +93 bps YoY and +52 bps QoQ |
| Profit before tax | ₹51.2 cr, 9.1% of total income |
| Revenue growth vs M&HCV industry | +6% YoY vs industry growth of +17% |
| Capacity utilization | ~80%, varies with product mix |
| Delivery performance | 97–98%, against OEM demand in the quarter |
| M&HCV revenue share | ~90%, in the recent quarter due to drop in export, off-highway, and defense |
| Non-M&HCV revenue share | 15–25% range, mix of export, defense, and off-highway |
| Non-M&HCV revenue decline | 5–15% drop, primarily driven by export |
| Other expenses | Over ₹81 cr, up from ₹60-odd cr QoQ, driven by technical fee arrangement tied to revenue growth |
| Q4 FY26 industry volume outlook | +5% to +10% YoY |
| New bus axle penetration expectation | 3–5% of largest OEM's portfolio |
| New 394 brake opportunity | 5–10% additional opportunity on new vehicles where not present today |