Key Takeaways
- Record quarter, cyclical peak watch: Q4 revenue jumped ~18% QoQ and ~18.7% YoY as the CV industry hit ~480,000 vehicles, 16% above FY25, with each OEM crossing individual records. The question now is whether this pace sustains.
- Aspirational top-line target set: Management laid out a ₹4,500 crore to ₹5,000 crore revenue ambition over 4-5 years, with exports as a key lever, backed by a capex cycle that will complete its next phase by December 2026.
- Product mix shift underway, not dilutive: The 185 axle for 4x2 tractor-trailers, now launched with all major customers, cannibalizes some rigid multi-axle products but captures value pricing with better profitability than legacy lines.
- Margins held despite one-off cost: Q4 PAT margin stayed at 8% YoY even after a workmen settlement pushed employee cost from 6.7% to 7.3% of revenue; FY26 EBITDA net of exceptionals improved 40-50 bps to 10.6%.
- What to watch next quarter: Whether Q1 and Q2 industry volumes, typically softer, confirm the demand consistency management sees, and the pace of new capacity coming live by December.
Demand Environment & Industry Cycle
- Phenomenal Q4, softer halves ahead: The CV industry closed FY26 at ~480,000 vehicles, 16% above FY25, driven by GST cuts spurring fleet purchases and an earlier-than-predicted replacement cycle. Management expects FY27 industry to be 400,000-plus but says whether it reaches 420, 450 or 480 is too early to call, with Q1 and Q2 typically softer.
- Cyclicality narrowed, then widened: Post-COVID, annual variation stayed within 5% until FY26, when 16% growth broke the pattern. The swing was driven by consumption, rural consumption, GDP and IIP indicators.
- Tonnage intensity rising: Industry tonnage moved from 8.7 crore tonnes (FY19 peak) to 9.4 crore tonnes (FY26) at roughly the same vehicle production level, reflecting a structural shift to higher-tonnage heavy-duty vehicles.
- No capacity constraints at current run-rate: Unless the market goes beyond Q4 volumes, existing capacity is sufficient; new capacity is expected to come live by December this year to meet peak demands at the 500,000-plus industry level.
Nagaraja Gargeshwari: "At this point of time, unless the market really goes beyond the volumes what we have seen in the last Q4, I don't think we have any capacity constraints at this point of time."
Product Mix & the Tractor-Trailer Shift
- 185 axle now multi-customer: The product, launched 2-3 years ago with one customer, has now ramped up with all major customers and represents the highest axle number in terms of capacity being created. It serves the growing 4x2 tractor-trailer segment, which is taking share from rigid multi-axle vehicles.
- Cannibalization, not loss: The shift from rigid multi-axle to tractor-trailer cannibalizes some existing products but is not a loss of business; the company captures it through the 185 axle. Management sees enough headroom for multi-axle rigid vehicles to also grow.
- New products priced for value: New product launches are aligned with OEM strategy changes and partially cannibalize current lines, but they capture value pricing based on features and benefits delivered to the end customer, with better profitability than legacy products.
- Tandem vs single axle realization: The premium is not 2x-3x as previously suggested; it ranges from 10% to 25% depending on product family and tonnage.
Kishan Kumar Udupi: "It will be a cannibalization of some of the products that we have in the rigid axle, multi-axle rigid axle rigid vehicle platform, getting into the 4x2 tractor trailer. And this product, what we have launched with one customer like 3, 4 years ago, now we have launched with all our major customers."
Exports & the Global Supply Chain Bet
- Exports as a growth lever: Management identified exports as a key enabler of the ₹4,500-5,000 crore aspirational top-line target over 4-5 years, citing long-run visibility for export orders despite temporary U.S. tariff uncertainty. The company is part of a global supply chain strategy, with investments in capacity and processes aligned to both export and domestic demand.
- Export scope is assemblies and subassemblies: Products are largely limited to assemblies, subassemblies and child parts, not fully dressed axles, because Europe and North America have different product requirements needing regional customization.
- Export as a domestic hedge: The ability to produce global products provides a buffer if the domestic market faces a downside.
- Meritor HVS agreement disclosed: A new sales agreement carries a technical fee of 4% to 4.5% of revenue depending on mix; management declined to disclose whether the fee applies to exports, domestic, or both.
Margins & Cost Structure
- PAT margin held steady: Q4 PAT margin stayed at 8%, the same level as Q4 of the prior year, despite a significantly varied cost structure that included a one-time workmen settlement.
- Employee cost step-up: A workmen settlement in the prior quarter, covering the next four years, pushed employee cost from 6.7% to 7.3% of revenue. Q4 employee costs of ₹47-48 crores included an ~8% one-off from leave encashment; the like-for-like run-rate should be lower by that amount.
- Material cost improved slightly: At ~68% of revenue, material cost was marginally better YoY, in line with the new business model.
- Steel price protection in place: Back-to-back agreements with most customers cover commodity changes, a standard industry practice. There may be a lag in adjustment, but the business is always protected; financials are already trued up to the last increase with provisions taken.
- EBITDA trajectory: Q4 EBITDA stood at 12.4%; full-year FY26 EBITDA net of exceptional items was 10.6%, a 40-50 bps improvement over FY25's 10.1%. Management does not give forward-looking margin statements but assures the bottom line will improve as product mix and top-line growth aid fixed cost absorption.
- Cash generation intact: Despite over ₹70 crore in capex, the company generated a net ₹30 crore in cash after investments.
Nagaraja Gargeshwari: "We always have a back-to-back agreement with most of the customers when it comes to commodity changes. And this is a standard industrial practice. There may be a little bit of a lag or lagging in that adjustment. But definitely, the business is always protected."
Capacity Expansion & Capex
- Phase 1 complete, Phase 1A by December 2026: Phase 1 of the capex cycle is already completed; Phase 1 and 1A will be finished by end of December 2026, with new capacity expected to come live by December this year.
- Next phase under study: Management is working on the overall plan for the next phase of investment over the next 6 to 12 months, considering both domestic and export needs, and will share details once finalized. Capex for FY27 is expected to be in a similar range as last year.
- Three focus areas for FY27: (1) Complete capex investment on time by December and bring associated benefits; (2) Develop gears for buses/coaches and associated products to realize additional share in segments where the company is present but not strong; (3) Remain sensitive to market demand changes, protect and grow the bottom line, and be ready for export opportunities.
Technology & Regulatory Outlook
- No major regulatory disruption: Upcoming safety regulations are not expected to force major changes; drum brakes will continue, with disc brakes remaining a niche for buses and hazardous goods. Overload regularization has not changed the product portfolio.
- Smart axles and ADAS not an India story yet: ADAS and electronic braking do not influence mechanical axles or brakes. Smart axles exist in the global portfolio but are not applicable for Indian markets currently; penetration even in developed countries is very limited. End-customer value perception differs in India.
- e-axle readiness: The Indian industry is still in the traditional central-drive plus mechanical axle world, which the company has protected with its current product portfolio. Content per vehicle for e-axles would be 100% of current plus power electronics, but it is too early to comment on India pricing strategy.
- Bus code regulation: More clarity has emerged on the low-floor bus code; the current product portfolio can meet most requirements, and products for that space are protected for the regulation, though some OEMs have different evolving strategies.
Kishan Kumar Udupi: "the industry is not ready. We are still in the traditional central drive plus mechanical axle world, which we have anyway protected with our current product portfolio."
Nagaraja Gargeshwari: "I'm looking anybody's guess because Indian market behaves very differently from Western World. All I can say is when it happens, we will be there."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Aspirational top-line target | ₹4,500 crore to ₹5,000 crore revenue, with exports as a key lever | Over next 4-5 years |
| Phase 1 and 1A capacity completion | New capacity to come live, meeting peak demands at 500,000+ industry level | By end of December 2026 |
| Next capex plan finalization | Overall plan considering domestic and export needs to be shared | In next 6 to 12 months |
| FY27 capex spend | Similar range as last year | FY27 |
| Bus/coach gear development | Develop products to realize additional share in segments where present but not strong | During FY27 |
| Industry demand FY27 | 400,000-plus vehicles expected; Q1 and Q2 typically softer | FY27 |
Key Metrics
| Metric | Q4 FY26 |
|---|---|
| Revenue | ₹664.3 crore, up ~18% sequentially and ~18.7% YoY |
| Total income (incl. other income) | ₹2,209.9 crore (FY26 full year), 5% YoY revenue growth |
| EBITDA | ₹82.5 crore, 12.4% of revenue |
| EBITDA margin | 12.4%, flat YoY; FY26 full year at 12.4% before exceptional item, 10.6% after |
| PAT | ₹53.9 crore, 8% of revenue |
| PAT margin | 8%, flat YoY |
| Material cost | 68% of revenue, slightly improved YoY |
| Employee benefit expenses | ₹47.3 crore, 7% of revenue, includes ~8% one-off for leave encashment settlement |
| Other expenses | ₹88 crore, slightly up due to variable portion |
| PBT | ₹72.3 crore, 10.8% of revenue |
| FY26 full-year revenue | ₹2,177.7 crore |
| FY26 full-year PAT | ₹164.3 crore, 7% of revenue |
| FY26 full-year EBITDA | ₹269.2 crore, 12.4% of revenue; 10.6% after ₹12 crore exceptional item |
| FY26 capex | More than ₹70 crore spent; 60–70% of committed investments deployed |
| Net cash generated (FY26) | ₹30 crore, after investments |
| Capacity utilization (Q4) | Over 90% |
| Industry TIV (FY26) | ~480,000 vehicles, 16% above FY25 |
| Technical fee to Meritor HVS | 4% to 4.5% of revenue, depending on mix |
| LCV/ICV revenue share | Less than 5% of total revenue |
| Industry tonnage carrying capacity (FY26) | 0.94 crore tonnes, up from 8.7 crore tonnes in FY19 peak |
| Aspirational top-line target | ₹4,500 crore to ₹5,000 crore over next 4–5 years |
| Phase 1/1A capacity completion | End of December 2026 |