Key Takeaways
- Toughest year, turning the corner: FY24 was the company's hardest in recent memory, battered by Chinese PVC dumping and oversupply in other chemicals. Management believes the worst is over and expects better performance from FY25 onward.
- Antidumping duties are the pivotal catalyst: Provisional duties of $115–$600/ton on PVC imports from China and four other nations have been announced. Gazetting these would stop irrational import pricing, the primary margin killer.
- Custom manufacturing is the growth engine: A fourth LoI was signed, targeting ~₹200–225 cr peak revenue, and Phase 2 of the new block is nearing completion. The company still holds its ₹1,000 cr revenue aspiration for the CSM business in 2–3 years.
- Paste PVC ramp-up adds near-term volume: The 41,000-ton Paste PVC expansion was commissioned in Q4 and is expected to hit 100% operating rates by end of Q1, with margins set to improve as pricing measures take hold.
- What to watch next quarter: Gazetting of the antidumping duties, clarity on capacity utilization for the new CMC block given the fourth LoI, and the pace of Paste PVC margin recovery.
The PVC Crisis & the Antidumping Remedy
- Chinese dumping crushed margins: India's PVC demand is strong, driven by real estate and infrastructure, but FY24 saw 860,000 tons of Chinese imports (33% of total imports) priced at unreasonable levels due to stress in China's property sector. This forced domestic prices down and compressed margins across the industry.
- Market forces are now helping: Chinese PVC futures have shot up, quotes are unavailable even at higher levels, and ocean freight has doubled from $40–50 to $80–90 with container shortages delaying arrivals. These factors are already pushing import costs higher.
- Antidumping duties are the structural fix: Provisional findings for both Paste and Suspension PVC have been issued, with duties of $115 to $600 announced on China, Malaysia, Taiwan, Thailand and Norway. Management is hopeful of gazetting soon, which would stop the irrational discounting that hurt the industry.
- Duties can endure: So long as dumping and injury can be proven, continuing antidumping duties can persist through midterm and sunset reviews, offering a durable shield.
- Indian supply-demand remains favorable: Even if 0.18 crore tons of domestic capacity comes online in 3–4 years, demand would still far exceed supply. Global additions are limited: ~400,000 tons in the U.S. by year-end, ~0.1–0.15 crore tons in China over 1.5–2 years, and none in Europe.
Ramkumar Shankar: "The industry is ok with the actual arrival of imports, but what it is not ok with is the discounting of the imports at such kind of unreasonable prices. And I believe that, that is getting corrected this year."
Custom Manufacturing: The Growth Story
- Fourth LoI signed, pipeline building: A new 5-year LoI was signed with an agrochemical innovator for an advanced intermediate, with peak revenue potential of ~₹200–225 cr. Commercial supplies are expected from calendar 2025, manufactured in Phase 2 of the new block.
- First two LoIs are progressing: The first LoI (signed Nov '22) has a draft supply agreement in place with commercial terms finalized. The second LoI's initial trial campaign met customer performance requirements, and a second campaign is now being planned.
- Phase 2 construction nears completion: The new multipurpose production block is expected to be finished by end of Q1, with handover as a continuous process over the following months.
- Revenue aspiration intact: Management still targets ~₹1,000 cr in CSM revenues within 2–3 years, driven by the four LoIs (₹700 cr annualized at peak) plus other commercialized and pipeline products. The global agrochemical downturn has hurt existing products in old blocks but has not touched the new block or new molecules.
- Pipeline commercialization accelerating: Three products were commercialized last year; another 2–3 are anticipated this year, with initial trial campaigns for 3–4 more. Over the 15-product pipeline, another 3–4 could be commercialized or run small campaigns this year, ramping up over subsequent years.
- Margins target 23–25% at steady state: CSM pricing is largely formula-based with raw material pass-through, insulating it from supply-demand swings. On a steady-state basis, management expects EBITDA margins of 23–25%, in line with the agrochemicals industry, though ramp-up phase margins may be slightly soft.
N. Muralidharan: "We still hold that number, Ranjit. Like Krishna was saying that the impact that we have seen is primarily on some of our existing products where we have seen the impact. The new products are ramping up well. And significant part of the revenue was expected only from the new products. So we still hold that number."
Paste PVC Expansion & Margin Recovery
- New capacity online, ramp-up underway: The 41,000-ton Paste PVC expansion was commissioned in Q4 FY24, with products meeting quality expectations. The company expects to reach 100% operating rates by end of June (end of Q1).
- Margin improvement expected: Paste PVC margins were flat QoQ in Q4, but management is confident that price improvements from the quality control order and antidumping duty should logically lift margins as these measures take effect.
- Demand backdrop is supportive: Paste PVC demand in India is strong, providing a receptive market for the additional volume as it comes online.
Other Chemicals: Stabilization Ahead
- Oversupply hit caustic soda and chloromethanes: Prices for chloromethanes and caustic soda in FY24 were at their lowest in three years, with further correction QoQ. Sales volumes for other chemicals dropped due to lower caustic soda and chloromethanes offtake.
- Stabilization expected over 3–4 quarters: Management sees the other chemicals portfolio likely stabilizing over the next 3–4 quarters, though no specific pricing recovery timeline was given.
- Cost-side relief provided a partial offset: Power and fuel costs fell ~₹71 cr and freight and handling ~₹23 cr in FY24, cushioning some of the revenue pressure.
Financial Performance & Cost Structure
- Q4 revenue improved QoQ: The sequential increase was driven primarily by better realizations for both Suspension PVC and Paste PVC.
- Gross margin under mixed pressure: Standalone gross margin was flat for Paste PVC but softened in chloromethanes and caustic soda. CMC new products, in ramp-up phase, carried lower initial margins.
- Employee costs rose: Higher manpower in the CMC business and the new Paste PVC facility pushed employee expenses up.
- CSM working capital remains opaque: Management declined to provide a working capital number or outer limit for the CSM business, stating it varies by product and customer and that the business needs time to reach a steady state before such metrics can be discussed.
Ramkumar Shankar: "FY'24 has been one of the toughest years for the company in recent times with the year being marked with challenges on all fronts."
Capacity & Investment Outlook
- Phase 1 utilization to keep rising: Management expects steady-state capacity utilization for the existing CMC block to continue increasing over the next couple of years.
- Phase 2 utilization clarity expected next quarter: With the fourth LoI signed, the company is reviewing whether all four LoIs will fully utilize Phase 1 plus Phase 2 capacity. Management promised better clarity by next quarter and expressed confidence in reaching targeted utilization "sooner rather than later."
- Phase 3 investment gated on visibility: The company will begin evaluating the next phase of CMC investment only when it has significant visibility on steady-state capacity utilization of existing assets. That evaluation is expected in the coming quarter.
- R&D infrastructure expanding: The second phase of R&D labs and assets was commissioned last quarter, and the second phase of pilot plant expansion will come on stream later next month, supporting the pipeline of new CSM products.
Krishnakumar Rangachari: "Hopefully, within the next quarter, we will have a better clarity on this, but fairly confident about the steady state capacity utilization reaching our targeted levels sooner rather than later."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Paste PVC ramp-up | Reach 100% operating rate on new 41,000-ton capacity | End of Q1 (June) |
| CMC Phase 2 completion | Construction of new multipurpose production block finished | End of Q1 |
| CMC capacity utilization clarity | Better visibility on Phase 1 + Phase 2 utilization with fourth LoI | Next quarter |
| CMC Phase 3 investment evaluation | Decision on next phase of investment based on utilization visibility | Coming quarter |
| Other chemicals stabilization | Portfolio likely to stabilize | Next 3–4 quarters |
| CSM revenue target | Reach ~₹1,000 cr revenues | 2–3 years |
| CSM steady-state EBITDA margin | 23–25% | At steady state (no date) |
| Fourth LoI commercial supplies | Begin supplies of new advanced intermediate | Calendar 2025 |
Key Metrics
| Metric | Q4 FY24 |
|---|---|
| Revenue from operations | ₹3,923 cr (FY24), declined 21% YoY; Q4 declined 8% YoY, increased 18% QoQ |
| Gross margin | 31%, flat QoQ |
| EBITDA | ₹21 cr, vs EBITDA loss of ₹7 cr in Q3 FY24 |
| EBITDA (full year) | ₹26 cr (FY24) |
| Net loss | ₹31 cr, vs net loss of ₹89 cr in Q3 FY24 |
| Net loss (full year) | ₹158 cr (FY24) |
| Finance costs | ₹51 cr, vs ₹47 cr in Q3 FY24; FY24: ₹181 cr vs ₹154 cr in FY23 |
| Employee expenses | Up 22% sequentially, due to higher manpower in CMC and new Paste PVC facility |
| Other expenses | ~₹255 cr, flat YoY and QoQ; FY24: ₹1,019 cr vs ₹1,114 cr in FY23 |
| Suspension PVC current price | $830 to $850 per ton (pre-duty) |
| Paste PVC current price | $1,050 to $1,100 per ton |
| VCM current price | $600 to $620 per ton |
| Suspension PVC pre-duty margin | $220 per ton, with $240 per ton considered a good margin level |
| CMC division revenue | ₹284 cr (FY24), roughly ₹300 cr, lower by ~13% vs last fiscal |
| Paste PVC expansion capacity | 41,000 tons, commissioned in Q4 FY24, ramp-up to 100% expected by end of Q1 FY25 |
| Fourth LoI expected revenue | ~₹500 cr over 5 years, peak annual revenue potential of ₹200 to ₹225 cr |
| Cumulative revenue from first 3 LoIs | ~₹1,200 cr |
| Annual revenue from all 4 LoIs | ~₹700 cr |
| Antidumping duty range (Paste PVC) | $115 to $600, on China, Malaysia, Taiwan, Thailand, Norway |
| Suspension PVC imports from China | ~860,000 tons in FY24, 33% of total imports into India |
| Ocean freight (Northeast Asia to India) | $80 to $90, up from $40 to $50 |