Key Takeaways
- A transformative quarter, not a revenue one: Revenue was lumpy (Q4 FY26 alone amounted to around INR346 crores, more than half of the full-year), but the real story is the pivot to CTC conductors, a technical collaboration with a top-3 Chinese manufacturer, and the Viraj Upkram merger, all aimed at a higher-value, engineered-product future.
- The product is being redefined as engineered, not a commodity: Management explicitly rejects the commodity label for its winding wires, framing them as engineered solutions that directly impact end-appliance performance and cost, a stance that underpins the margin outlook.
- CTC is the next leg of growth: Machines are arriving, a technical partner is providing hand-holding and proprietary testing equipment, and production is targeted for December, opening doors to power and loco transformer manufacturers and export markets.
- A merger to consolidate a technological edge: Viraj Upkram, with state-of-the-art machinery that even Vimlesh Industries lacks, is being merged into the Group to eliminate redundancy and capture a manufacturing cost and quality advantage.
- What to watch next quarter: The on-time start of CTC production in December, the pace of export order conversion from the Middle East exhibition, and any quantification of the Viraj Upkram merger’s financial impact.
The Strategic Pivot: CTC Conductors
- The problem CTC solves: To overcome the weight-to-current-carrying-capacity challenge of a single large conductor, CTC splits it into small, individually insulated strips that are bunched together in a controlled way, increasing surface area and efficiency.
- Production timeline: Some CTC manufacturing machines have already been received from China, with others being dispatched; the company expects to start production by December, subject to realization.
- Technical collaboration de-risks the launch: A technical collaboration agreement is in place with the third-largest Chinese manufacturer of CTC, which will provide hand-holding through the setup phase, help achieve production quality, and supply in-house-developed testing equipment not available on the open market.
- Initial scale and ambition: Two separate CTC lines are being set up initially, with plans to enhance them further based on the performance of the current plant.
- Target markets: The immediate customer base is power transformer manufacturers and loco transformer manufacturers, with a clear line of sight to export opportunities in European and Middle Eastern countries that are already importing CTC products from India.
Anuj Talwar: "So to overcome that challenge like the weight to current carrying capacity, what we've done is instead of one big conductor... we split that big conductor into small strips and those strips are individually insulated, hence increasing the surface area and then they are bunched together in a very controlled and systematic way..."
Product & Margin Philosophy
- Engineered, not a commodity: Management draws a hard line between the raw materials (copper and aluminium, which are commodities) and the final winding wire, which is an engineered product that impacts the performance and cost of the entire end appliance.
- Margin outlook is steady: When asked about the EBITDA margin outlook over the next two years to FY28, management stated it will be "in similar lines to the past trends," implying no structural dilution from the new investments.
- AI integration for quality: The company is importing technologies from China to integrate AI-based online defect detection in the enameling process, using cameras to monitor the wire consistently for 100% foolproof output.
- Customer mix has shifted: Supply to state discoms is now negligible; the company has pivoted away from government entities toward private players, currently supplying only to Tata Power and BSES among discoms.
Anuj Talwar: "We do not treat the conductors just as a normal product like it is not a commodity. Copper and aluminum might be a commodity but what we are doing is not a commodity. It is more towards the engineered side because we don't just... sell the copper or... aluminum. We sell the final winding wire, which is going to impact the performance and the cost of your whole appliance altogether..."
Corporate Restructuring: Viraj Upkram Merger
- The asset: Viraj Upkram, established by the promoters, is equipped with the latest state-of-the-art machinery that even Vimlesh Industries does not have, giving it an edge in manufacturing costs and quality.
- The rationale: Now that Vimlesh Industries is part of the Divine Group, it does not make sense to have a separate company doing the same business, so Viraj Upkram is being merged into the Group to consolidate the technological advantage.
- The implication: This merger brings next-generation manufacturing capability directly into the listed entity, potentially improving cost structure and product quality without the distraction of a parallel promoter-owned operation.
Anuj Talwar: "So that puts Viraj Upkram in a very sweet spot. So Viraj Upkram has the latest technology machineries, all the like state-of-the-art machineries which even Vimlesh Industries doesn't have so far and that provides it the edge in terms of manufacturing costs and quality, and that is why -- but now that Vimlesh Industries is also part of the Group, so it doesn't make sense to have a separate company doing the same business."
Revenue Dynamics & Order Book
- Revenue is inherently lumpy: Q4 FY26 revenue of ~₹346 crores was more than half of the full-year ₹626 crores, driven by a rise in metal pricing; the underlying run rate was more or less similar between the first and second halves, with the second half usually performing a little better.
- Order book is short-cycle: The overall order book is about 1.5 months, though fiberglass insulated conductors have a longer 2.5–3 month waiting period, indicating stronger demand or capacity constraints in that sub-segment.
- Copper and aluminium share machines: The same machines are used for both metals in insulated conductors, so a fixed volume split cannot be calculated; producing more of one means making less of the other, making the mix a function of demand at any given time.
- New customer win: KEI has been recently onboarded as a customer, adding a known name to the private-sector client base.
Export Ambition & Early Signals
- Starting from a near-zero base: Exports are currently negligible (less than 1% of revenue) because the previous owners of Vimlesh Industries did not focus on exports; the new management is now working to reestablish the Vimlesh brand in export markets.
- Middle East is the beachhead: The company participated in the Middle East Electricity 2026 exhibition and received a "great response," and is working to enhance exports in the Middle East region, though management declined to put a number on the target, calling themselves "very optimistic."
- CTC as an export product: European and Middle Eastern countries are already importing CTC products from India, and management sees this as a great opportunity for their upcoming CTC capacity.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| CTC production start | Begin production from the new CTC lines | December (subject to realization) |
| EBITDA margin trajectory | Margins to remain "in similar lines to the past trends" | Next two years to FY28 |
| CTC capacity expansion | Enhance the two initial CTC lines further | Based on performance of the current plant |
| Export growth | Enhance exports in the Middle East region; no number committed | Undated |
Key Metrics
| Metric | Q1 FY27 |
|---|---|
| Revenue | ₹626 cr in FY26; Q4 FY26 alone was ~₹346 cr, more than half of the full year |
| Revenue mix (copper) | 82% insulated, 18% bare products |
| Revenue mix (aluminium) | 74% insulated, 26% bare products; aluminium foil classified as bare |
| Customer concentration | ~50% of revenue from top five customers |
| Export revenue share | Negligible, not even 1% of total revenue |
| Order book | ~1.5 months overall; ranges from 1 month to 3 months depending on product |
| Fiberglass insulated conductors waiting period | ~2.5–3 months |
| Installed capacity (copper) | 500 tonnes per month |
| Installed capacity (aluminium) | 400 tonnes per month |
| Copper vs aluminium tonnage split | ~60-40 |
| CTC production lines | Two separate lines being set up; production expected to start by December, subject to realization |
| EBITDA margin outlook | In similar lines to past trends through FY28 |