Key Takeaways
- Resin margins crushed by raw material lag: Resin segment EBIT fell 52% YoY as EDC costs rose while PVC prices fell, a timing mismatch that compressed spreads sharply in Q4.
- Pipes & fittings held the line: Segment EBIT rose 36% YoY in Q4, driven by a 23% jump in non-agri volumes as the mix shift toward higher-value plumbing and sanitation products continued.
- China is now the swing factor: Anti-dumping duty removal in February opened the door to Chinese PVC imports, which are arriving at soft prices and pressuring domestic realizations; management sees further downside risk.
- Cash deployment decision looms: With Rs.376 Crores in land monetization proceeds already banked and no large capex on the drawing board, management explicitly stated the cash "should not and will not remain in the books for long."
- What to watch next quarter: Whether the agri demand pickup seen in mid-May sustains through the monsoon, how much further Chinese PVC imports depress domestic prices, and the shape of the promised cash return decision.
Resin Segment: The Spread Squeeze
- The core problem: Raw material prices, especially EDC, rose through November to January while PVC selling prices declined during the same window, compressing the delta between input cost and output realization.
- VCM route disruption: An unplanned shutdown pushed the VCM-to-resin route share higher than the EDC route in Q4, and VCM supply was also disturbed because of QVC, adding cost pressure.
- No inventory losses booked: Net realizable value remained above cost in Q4, so no write-downs were required, but management flagged that falling PVC prices hit the bottom line temporarily through lower realizations on inventory held.
- Spread outlook is uncertain: Chinese lockdowns have created surplus PVC that is being exported to India, and if other global suppliers cut prices, China may cut further, keeping domestic PVC prices under pressure.
Niraj Kedia: "In future we will see how the market goes because there are other factors also which come into play, there is slowdown in China, so material being pushed into India, which is also affecting the PVC prices in the country, so it remains to be seen Rahul how the delta moves going forward."
Pipes & Fittings: The Mix Shift Story
- Non-agri volumes drove growth: Q4 non-agri volume grew 23% YoY to 23,000 tons, and the full-year growth was 27%, lifting non-agri share from 25% of volumes two years ago to 33% in FY22 and over 40% in value terms.
- CPVC is the star performer: Full-year CPVC volumes grew 35% to 13,000 tons, with value rising from Rs.280 Crores to Rs.450 Crores, though management cautioned the pace will moderate as the base expands.
- Debtor days rose for structural reasons: Higher PVC prices and the growing non-agri mix, which carries 30 to 60 days of credit versus agri's shorter cycle, pushed up receivables; outstanding is roughly 45 days of non-agri sales.
- Dealer quality, not quantity: Total dealer count is not rising much because management is reclassifying underperforming dealers as secondary dealers, improving the qualitative mix of the primary network.
- CPVC supply constraints easing but not gone: US suppliers diverted material to their home market last year, starving Indian producers; the situation has improved but still persists.
Demand Environment
- April was soft, May is picking up: Demand was lukewarm in April as PVC prices were declining and buyers held back, but by mid-May the market was showing strength from both agri and non-agri segments, though not at the peaks of two years ago.
- Agri buyers are capitulating: After two years of waiting for price corrections, many farmers and agri buyers are now going ahead with purchases instead of waiting endlessly, and some pickup is already visible.
- Dealer inventories are razor-thin: Dealers normally carry no more than eight days of inventory, and in volatile times they carry even less, so any demand recovery flows quickly into offtake.
- Industry growth below trend: FY22 PVC industry growth was below the historical 1.3x GDP multiple, and management assessed the industry is more or less at pre-pandemic levels on PVC.
Sanjay S. Math: "There will be many who instead of now waiting will go ahead because they cannot wait endlessly."
China, Imports & Pricing
- Anti-dumping duty removal changed the game: The duty on Chinese PVC was removed in February 2022, and material from China has started coming in, with low Chinese demand due to lockdowns pushing exports toward India and causing price softness.
- Cumulative price decline: PVC prices dropped a cumulative Rs.16 per kg (Rs.6 then Rs.10) from an unspecified start date to the call date in mid-May.
- Further downside risk: Chinese offers may come lower, and if other global suppliers reduce prices, China may reduce further; management is in wait-and-watch mode.
- Industry price pass-through is disciplined: PVC price changes are passed on to dealers very quickly, almost simultaneously, with a lag of only 2 to 5 days to a week, which limits margin damage from holding inventory but also means price declines hit realizations fast.
Sanjay S. Math: "India being the major market they are dumping it. Now when the other suppliers other countries are reducing their prices there is possibility China also reduces their price further."
Capital Allocation & Land Monetization
- Land deal closed: Half of the Chinchwad leasehold land parcel was assigned, generating an exceptional gain of Rs.376 Crores, with the transaction completed and money received before March 31, 2022.
- Second tranche expected this year: The remaining half of the land is expected to be monetized in FY23.
- Cash return commitment: Management was explicit that a large amount of cash should not and will not remain on the books for long, and a decision will be taken soon; if no large capex project is undertaken in reasonable time, the money will flow back to shareholders.
- Capex is modest: Rs.200 to 250 Crores planned over the next 1 to 1.5 years, entirely for asset replacement in resin and additional moulds in pipes, with no capacity addition in either segment.
Anil V. Whabi: "There is nothing on the drawing board right now. I said we will look at the options and in reasonable time if there is no project being undertaken that money will go back."
Cost Structure & Competitive Position
- Power cost is a structural advantage: Finolex has the cheapest power because it is coal-based, and all utilities including water, air and oxygen are produced in-house, leaving very little room for further cost savings.
- Feedstock sourcing is the profitability lever: Costs are almost stabilized with hardly any technology change; profitability depends on how raw materials are sourced, and in-house VCM is cheaper than bought-out VCM, so any shift from make to buy lowers margins.
- Carbide-route PVC is not a threat: The calcium carbide route is more energy-intensive and costlier than the ethylene route, which is why players are not setting up carbide-route capacity in India.
- Finolex Plasson drag: The fittings joint venture incurred a loss of Rs.3.9 Crores for the full year.
Sanjay S. Math: "I think the costs are almost stabilized in the sense that whatever operations are there is hardly any technology change that has really happened; it all depends upon how you source your raw materials."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Volume growth | Double-digit volume growth targeted for FY23 | FY23 |
| Capex | Rs.200–250 Cr for asset replacement (resin) and moulds (pipes); no capacity addition | Next 1–1.5 years |
| Land monetization (remaining half) | Remaining Chinchwad leasehold land to be monetized | FY23 |
| Cash deployment | Decision on returning excess cash to shareholders to be taken soon; cash will not remain on books for long | "Soon" / "reasonable time" |
| Non-agri mix | Non-agri basket will continue to grow in proportion, continuing the same strategy | Ongoing |
| CPVC growth pace | CPVC business will continue to grow but not at the earlier very fast pace, as the base has expanded | Ongoing |
Key Metrics
| Metric | Q4 FY22 |
|---|---|
| Revenue | Not explicitly stated for Q4 FY22 in transcript or scratchpad |
| PAT including exceptional items | ₹1,053 cr (FY22), up 45% YoY |
| Exceptional gain (land assignment) | ₹376 cr before tax, tax at ~20% |
| EBIT – resin segment | ₹157 cr, down 52% YoY |
| EBIT – pipes and fittings segment | ₹94 cr, up 36% YoY |
| Net cash surplus | ₹1,550 cr as on March 31, 2022 |
| Capex guidance | ₹200–250 cr over next 1–1.5 years, pipes and resin together |
| PVC-EDC delta | $727 in Q4 FY22 vs $877 in Q4 FY21; currently ~$850 |
| PVC-VCM delta | $350 in Q4 FY22 vs $331 in Q4 FY21; currently ~$250 |
| PVC resin price | $1,563 average in Q4; currently ~$1,500 |
| EDC price | $835 average in Q4; currently ~$680 |
| VCM price | $1,213 average in Q4; currently ~$1,270 |
| Ethylene price | $1,187 average in Q4; currently $1,220 |
| Pipe volumes – non-agri | ~23,000 tons, up 23% YoY |
| Pipe volumes – CPVC (pipes & fittings) | 3,600 tons in Q4; 13,000 tons FY22, up 35% YoY |
| CPVC revenue | ~₹130 cr in Q4; ~₹450 cr FY22 vs ₹280 cr FY21 |
| Fittings revenue | ₹240 cr in Q4 vs ₹160 cr in Q4 FY21; ₹190 cr in Q3 FY22 |
| Agri vs non-agri volume mix (value terms) | 59:41 in FY22 vs 63:37 in FY21 |
| Non-agri share of volume | 33% in FY22 vs 29% in FY21 |
| Dealer network | ~900 dealers and 22,000+ retail touch points |
| Resin manufacturing route split | 60% EDC route, 40% VCM route |
| Finolex Plasson profit (consolidated) | ₹1.5 cr in FY22; standalone profit ₹3.8 cr |
| PVC industry growth | Less than 10% in FY22, below 1.3x GDP trend |
| Chinese PVC import duty (post-ADD removal) | 10% normal duty applies |
| Freight cost – PVC from China/Asia-Pacific | ~$40/ton |
| Formosa PVC offer price | $1,410 (as of day before call) |
| CPVC SKU additions | ~100–150 SKUs added in last two years |