Key Takeaways
- Margin squeeze from multiple directions: Gas costs for sanitaryware doubled YoY to ~₹60, PVC prices fell ~42% over 6–7 months triggering inventory losses of ₹19–20 crore in Q2 alone, and consolidated margins were under pressure from higher raw material prices and subdued market sentiment.
- Pipes business absorbed a brutal PVC cycle: Continuous decline in PVC prices forced channel destocking and inventory write-downs, yet volume grew on the back of a deliberate shift toward higher-margin CPVC, which now contributes over 50% of pipes revenue.
- Price hikes are flowing through, but with a lag: Sanitaryware prices were hiked 6–7% effective 1st November, and management expects the margin benefit to start showing in Q3; consumer appliances margins already recovered to ~7% EBIT after prior-quarter price increases.
- Debt peaked and deleveraging is now the plan: Gross debt sits at ~₹750 crore and management says it will not rise materially from here; ₹200–250 crore of loans are targeted for repayment over the next 18–24 months from surplus cash generation.
- What to watch next quarter: Whether the 6–7% sanitaryware price hike translates into the promised margin improvement, the pace of PVC price stabilization and any further inventory losses in pipes, and the settlement of the remaining AGI Greenpac payment.
Sanitaryware & Bath: Gas Shock and Price Response
- Gas cost doubled: The main input cost for sanitaryware manufacturing rose from ₹20–25 per unit last year to ~₹60 currently, compressing margins despite the shift to in-house manufacturing post the AGI Greenpac asset acquisition.
- Price hikes taken in stages: A 13–14% cumulative price increase was implemented over the past year, with a further 6–7% hike effective 1st November 2022; management expects the margin pass-through to become visible in Q3.
- Long-term margin ambition: Management believes sanitaryware margins should normalize and expand to a range of almost 15% on a long-term basis, though it declined to give a near-term absolute margin target.
- Volume disclosure declined: When asked for sanitaryware and faucet volume growth for Q2 and H1, management refused, arguing volume is a misnomer given different product sizes and forms, and that the market evaluates the business on sales value.
- Bath business growth drivers intact: Strong growth delivered through new product launches, distribution expansion (75+ additional distributors added in Q2), and increased brand preference; management is confident of sustaining growth.
- Tier-3/Tier-4 outperformance: These markets are growing at double the rate of metros, with premium brands like Italian and Queo seeing increased demand even in smaller towns.
Sandeep Sikka: "The gas input is the main cost, has increased substantially. And like last year, we used to get gas at odd Rs.20, Rs.25 which is now coming at odd Rs.60 to us."
Pipes: PVC Collapse, CPVC Cushion
- PVC price decline drove inventory losses: PVC raw material prices fell ~42% over 6–7 months, causing channel destocking and inventory losses of ₹19–20 crore in Q2 and ₹6–7 crore in H1; CPVC was not impacted.
- Further losses likely: Post-Q2, PVC prices declined twice more (from ₹90–100 to ₹77–78), so some additional inventory losses are expected in coming periods, though quantification depends on how prices evolve.
- CPVC mix shift provided a hedge: As PVC prices fell and disrupted the market, the share of higher-margin CPVC pipes and fittings rose substantially to over 50% of pipes revenue in Q2, with good volume growth both YoY and sequentially.
- Capacity expansion on track: Two new machines installed during the quarter raised capacity to 37,000 MT; further additions are expected to reach 39,000 MT by end of Q3. The brownfield expansion at Isnapur, Hyderabad is scheduled for completion next month December 2022, and the Roorkee greenfield project (land already purchased) is progressing as planned.
- Product portfolio deepened: Over 200 new products were added in Q2, taking total SKUs offered to more than 1,500.
Consumer Appliances & Retail: Premiumisation Working, Demand Muted
- Consumer appliances margin recovered: EBIT margin returned to the vicinity of 7% in Q2, helped by an enhanced focus on premiumisation and the benefit of price increases taken in the preceding quarter; no further price hikes were taken during Q2 as input prices moderated.
- Fans category under regulatory transition: The industry is undergoing a complete change as non-rated fans were discontinued from 1st January, causing muted industry-wide performance and potential de-growth in fans; kitchen appliances grew 30% and air-cooling grew triple digits.
- Retail business facing discretionary headwinds: Inflation is pressuring discretionary categories like furniture, and both online and offline sales have been modest in line with the muted demand environment; management is optimistic margins will revert to previous levels as raw material and inflation challenges abate.
- Consumer demand revival expected later: Inflationary trends normalized somewhat in October versus September; demand revival is expected more toward the latter half of Q3, with Q4 potentially seeing a much more robust pattern.
Capital Allocation, Debt & Working Capital
- Debt has peaked: Gross debt stands at ~₹750 crore and management stated it will not go up materially from here; some inventory dilution and debtor optimization are targeted.
- Deleveraging plan: ₹200–250 crore of loans to be repaid over the next 18–24 months from surplus cash generation, bringing debt levels down accordingly.
- Finance cost rose on three fronts: Effective interest rates increased ~1.9–2.0% in line with market trends; new loans were taken for the building products manufacturing acquisition; and inventory increased. Additionally, lease rentals for Bahadurgarh and Isnapur land/buildings now accrue to depreciation and interest under Ind AS.
- Working capital optimization target: Inventory will be optimized over the next 12–18 months, with an opportunity to reduce it by a further 15–20%; debtors have already seen substantial improvement over the last two years.
- Normalized capex run-rate: Annual capex is expected to be ~₹70–80 crore, contingent on initiatives like visual distribution points for sanitaryware.
- Capital allocation philosophy: Leadership position is critical: top five in fragmented markets, top three in non-fragmented markets. On a long-term basis, consistent ROCE of 15–18% in a normalized market is the benchmark.
Sandeep Sikka: "We have a benchmark in our mind for sort of business which we do. One that we should become a leader in that business. When we say the leader in a highly fragmented market, we should be amongst the top five. And when it's not a fragmented market, we should be amongst the top three."
Competitive Positioning & Distribution
- Brand moat in sanitaryware: Management pushed back on the threat from new entrants, arguing the category is a brand business where consumers choose visible products for their bathrooms; building a brand from scratch takes a long while and the business is not solely driven through plumber relationships.
- Dealer white-space filling nearly complete: The company targeted ~60 towns with 1 lakh+ population where it previously had no presence; the majority now have distributor or dealer coverage, though coverage remains thinner in Western India (rural Maharashtra, Madhya Pradesh).
- Regional mix varies by division: Sanitaryware and faucets are led by the North, then South, East, and West (smallest). Pipes are concentrated in the South (47%) and North (30%). Consumer appliances are led by e-commerce, with the North the largest regional market if e-commerce is allocated geographically.
Sudhanshu Pokhriyal: "This is not a business which is solely done through plumbers. This business is largely a brand business, a consumer wants to buy a brand and wants to put it in his bathroom, and it's not a product which goes behind the wall. So, to create a brand, for a product, for a company which is not selling brand right now to consumer, it will take a long while."
Freight, Input Costs & Other Operational Details
- Ocean freight benefit delayed: Ocean freight has declined substantially, but the P&L benefit will only flow through from Q4 onwards for bath ware and late Q3 or early Q4 for consumer appliances, because high-cost inventory from Q1 and late Q4 of the prior year is still sitting on the books.
- AGI Greenpac settlement nearing completion: ₹50 crore had been paid by September; one land transfer was completed; the remaining settlement is expected within Q3 or the next month.
- Production yield data withheld: When asked for yield from sanitaryware and faucet plants, management called it "too micro a question" and declined to disclose.
- Short-term margin guidance declined: Management stated it generally does not give short-term targets, only the medium-to-long-term consolidated EBITDA margin range of 14–16%.
Sandeep Sikka: "Markets are very volatile and it has been volatile as I spoke that, especially on the few of the product prices are increasing, few of the product prices are coming down like for the pipes the PVC prices are coming down. On the gas side, the prices are going up I really understand, it's for any analyst community they have to really go through the deeper into the data to really aspect the whole thing."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Sanitaryware margin pass-through | Impact of 6–7% price hike (effective 1st Nov) to start showing in margins | Q3 FY23 |
| Pipes brownfield completion | Isnapur, Hyderabad capacity expansion completed | December 2022 |
| Pipes capacity | Reach 39,000 MT | End of Q3 FY23 |
| AGI Greenpac settlement | Entire remaining payment settled | Within Q3 or next month |
| Ocean freight P&L benefit (bath ware) | Lower freight costs flow through | Q4 FY23 onwards |
| Ocean freight P&L benefit (consumer appliances) | Lower freight costs flow through | Late Q3 or early Q4 FY23 |
| Debt reduction | ₹200–250 crore of loans repaid from surplus cash | Next 18–24 months |
| Working capital optimization | Inventory reduced by further 15–20% | Next 12–18 months |
| Roorkee greenfield plant | Plant set up and operational | Q3/Q4 FY24–25 |
| Long-term sanitaryware margin | Expand to range of almost 15% | Long-term (no date) |
| Medium-term consumer products margin | EBIT margin in double digits | Medium to long term |
| Consolidated EBITDA margin | 14–16% | Medium to long term |
| Consolidated ROCE | 18–24% in normal market conditions | Medium to long term |
| Normalized annual capex | ~₹70–80 crore | Ongoing |
Key Metrics
| Metric | Q2 FY23 |
|---|---|
| Consolidated revenue from operations | ₹715 crore, up 16% YoY |
| Consolidated EBITDA | ₹64 crore, up 11% YoY |
| Consolidated PAT (after JV results) | ₹16 crore |
| Building Products segment revenue | ₹576 crore, up 19% YoY |
| Building Products segment EBIT | ₹33 crore |
| Bath business revenue | ₹379 crore, up 16% YoY |
| Bath business EBITDA | ₹48 crore, up 31% YoY |
| Plastic Pipes and Fittings revenue | ₹197 crore, up 24% YoY |
| Plastic Pipes and Fittings EBITDA | ₹6 crore |
| Consumer Appliances revenue | ₹125 crore, up 12% YoY |
| Consumer Appliances EBITDA | ₹11 crore, up 9% YoY |
| Retail business revenue | ₹14 crore |
| Consolidated quarterly interest cost | ~₹18 crore |
| Net debt | ~₹750 crore |
| Pipes business Q2 inventory loss | ₹19 to ₹20 crore |
| CPVC share of pipes business revenue | >50% |
| Sanitaryware price hike effective 1st November | 6% to 7% |
| Bath business distributor additions in Q2 | 75+ |
| Pipes business new products added in Q2 | 200+, total SKUs now more than 1,500 |
| Consumer Appliances new distribution points opened in Q2 | 133+ across both businesses |
| Retail franchise stores (as of Sep 2022) | 34 franchise stores plus own stores, 4 franchises added in Q2 |
| Hindware Italian share of overall bath portfolio | ~50% |
| Faucets as percentage of overall bath products | ~34% to 35% |
| Top 7–8 metros share of Hindware brand sales | 33% metros, 67% non-metro (YTD basis) |
| Pipes and fittings regional mix | South 47%, North 30%, West 18%, East 5% |
| In-house manufacturing share (value terms) | Sanitaryware ~55%, faucets ~45% to 46% |
| Sanitaryware imports from China | ~15% |
| Pipes capacity utilization | >80% overall, CPVC >90% |
| Faucets capacity utilization | ~55% |
| Plastic pipes installed capacity | 37,000 MT in Q2, expected 39,000 MT by end of Q3 |
| CPVC volume growth YoY | 40%+ |
| Kitchen appliances growth | 30% |
| Air-cooling business growth | triple digits |
| Consumer Appliances EBIT margin | vicinity of 7% for the quarter |
| Long-term consolidated EBITDA margin target | 14% to 16% |
| Long-term consolidated ROCE target | 18% to 24% in normal market conditions |
| Normalized annual capex | ₹60 to ₹70 crore |
| H1 FY23 capex spent | ~₹70 crore |
| Debt repayment plan | ₹200 to ₹250 crore of loans to be paid off in next 18 to 24 months |
| Pending payment to AGI Greenpac | ₹50 crore paid by September, balance to be settled within Q3 or next month |
| PVC price at quarter end | ~₹90 to ₹100; current prices ~₹77 to ₹78 |
| Decline in PVC/CPVC raw material prices over last 6–7 months | ~42% |
| Total pipes inventory loss | ₹25 crore |
| Sanitaryware price increase in last 12 months | 13% to 14% |
| Faucet price increase in last 12 months | 12% to 13% |
| Debtor days for building material products | 30 to 40 days on an overall basis |
| Working capital inventory reduction target | further 15% to 20% in next 12 to 18 months |
| Service network | 650 technicians pan-India, female technicians <2% |
| Consumer Appliances patents | 33+ registered, 2 granted |
| New business incubation period | ~5 years, capital recoupment 4 to 5 years |
| Roorkee plant expected completion | Q3/Q4 of FY24–25 |