Key Takeaways
- Restructuring masked by weak demand: Bathware revenue fell ~9% as internal team and warehouse consolidation disrupted primary dispatches, while a pre-Diwali demand slump compounded the damage. Management calls the market share loss temporary.
- Pipes volume up, value flat: TRUFLO delivered 11% H1 volume growth but volatile raw material prices erased the value gain, leaving revenue flat. Two upward PVC revisions in the current month offer a positive signal.
- Sanitaryware cost breakthrough is real but delayed: Six Sigma and Industry 4.0 projects cut cost of production 8-10%, lifting first-time throughput to world-class levels. The benefit hits the P&L only from Q4 due to inventory accounting.
- Consumer business is the Board's number-one priority: The loss-making unit is being aggressively restructured (EVOK shut, SKUs rationalized, seasonal exposure cut), but management declined to give a timeline for EBITDA breakeven.
- What to watch next quarter: Whether the October faucet price hike sticks, whether H2 revenue tracks the internal flattish forecast, and whether the sanitaryware cost benefit begins to show in reported margins.
The Restructuring Overhang
- What changed: Sanitaryware and faucet sales teams were merged; Consumer and Bathware back-end operations were combined into a single unit; 29 warehouses consolidated into 11; and service operations for both divisions were merged. Over 350 jobs were affected across both divisions.
- Why it hurt now: The overhaul was executed during a period of already-weak revenue growth, amplifying the disruption. Primary dispatches to distributors fell, even though secondary consumer demand at outlets remained similar.
- Temporary vs permanent: Management insists the market share loss is a temporary blip driven by internal change, not a structural shift. Secondaries are running 3% higher than primaries, supporting the claim that product is moving, just not being reordered.
- Warehouse timeline: Three warehouses are already consolidated; the remaining eight will be completed by Q4, alongside transport and warehouse management system implementation.
Pokhriyal: "Unfortunately, in hindsight, when we look at it, we have done it in a period which was not a good period in terms of revenue growth."
Bathware: Margin Pressure & the Cost Recovery Path
- Q2 margin decline drivers: Roughly 50% of the sequential margin gap came from higher discounting, 25% from product mix deterioration, and 25% from cost increases including higher gas prices.
- Sanitaryware cost breakthrough: First-time throughput improved from 76% to 84-85%, and refire rates reached 93-93.5%, which management describes as world-class. Combined with process optimization, Industry 4.0 sensors, and better kiln scheduling, cost of production fell 8-10%.
- Accounting delay: The cost benefit will begin reflecting in the P&L only from Q4 onwards because of weighted-average inventory accounting.
- Price hike timing gap: A competitor took a price hike in the last month of Q2; Hindware took its faucet price hike only in October (Q3), contributing to a notional share loss in September.
- Scheme reduction: Schemes were reduced from mid-September, which helps reported revenue (net of schemes) and margins, but the volume impact remains uncertain and depends on market conditions.
Pokhriyal: "Now that number has moved from that to about 84-85, so basically 8-odd percentage improvement... we basically have gone to 93%-93.5%, which means that we have less than 7% wastage. Now that's like world-class number."
Pipes & Fittings: Volume Strength, Value Headwinds
- The volume-value split: TRUFLO grew volumes 11% YoY in H1, but a sharp decrease in raw material prices during Q2 meant value was flat. Q1 had been good; Q2 struggled specifically on the price pass-through.
- Current-month signal: Two upward revisions in PVC prices in the current month provide a positive near-term indicator for value recovery.
- Product pipeline: Foam core products for underground drainage launched this quarter. Double-wall corrugated pipes and fire sprinkler systems are slated for launch later in FY25.
- Roorkee plant: Construction is on track, with commercialization expected around February or March. First-year revenue is projected at ~₹150-160 cr with ~11% EBITDA, though ramp-up depends on market response.
Consumer Business: The Profitability Mandate
- The Board's directive: The number-one priority is to get the Consumer business into profitability. Actions include shutting down the EVOK business, aggressively cutting low-margin categories and retail SKUs, and merging service operations with the Bathware division.
- Seasonal whiplash: Q1 benefited from extreme heat driving cooler sales; Q2 had no such support. The kitchen business, which carries 42-43% gross margins and is non-seasonal, did not pick up as expected, mirroring Elica's negative Q2 numbers.
- No breakeven timeline: Management declined to specify when the Consumer business will turn EBITDA positive, saying only that 1-2 more quarters of stress are expected before the business improves in both profitability and revenue growth.
- Cost savings offset: The ₹20-25 cr cost savings target included manpower optimization of 250-300 people, already executed. However, incremental inflationary increments for remaining employees will offset some of the benefit, so the net P&L impact may appear flat.
Balance Sheet & Working Capital
- Working capital improvement: Gains have come on the payable side, not from inventory or receivables. Market conditions are not favorable, so the company is not storing inventory for sale. Internal targets exist for inventory and debtor reduction.
- Debt reduction timeline: Management expects various initiatives (cost optimization, operational efficiencies, supply chain cost reduction, manufacturing cost efficiency) to start reflecting in the P&L over the next 12 to 18 months, which will support debt reduction. No specific ROCE/ROE targets were provided.
Demand Environment & Competitive Position
- Pre-Diwali disappointment: A typically buoyant season did not produce heavy demand, adding an external headwind beyond the self-inflicted restructuring disruption.
- Dealer feedback gap: When asked about dealer complaints on frequent pricing policy changes, management stated the pricing policy has not changed in four years, only schemes have changed tactically. The specific complaint about lagging sales service was not addressed.
- Maharashtra redevelopment: Maharashtra represents 6-7% of business and Mumbai is not a large market-share geography. Management did not indicate whether the redevelopment trend will become a meaningful growth contributor.
Pokhriyal: "Just before Diwali, usually it is a pretty buoyant season, but we've not really seen a very heavy demand coming in just before Diwali as well."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Bathware margin expansion | ~200 bps expansion over current levels, based on current market conditions | 18-24 months |
| Pipes margin expansion | 1.5%-2% expansion over last year, with input price fluctuation caveat | By March 2026, once both plants are running |
| Sanitaryware cost benefit in P&L | 8-10% production cost reduction to reflect in reported margins | From Q4 FY25 onwards |
| Warehouse consolidation complete | All 11 consolidated warehouses operational with TMS/WMS | By end of March (Q4 FY25) |
| Roorkee plant commercialization | First-year revenue ~₹150-160 cr at ~11% EBITDA | February or March 2025 |
| H2 FY25 revenue | Flattish vs H2 last year, per internal S&OP forecast | H2 FY25 |
| Consumer business turnaround | "1 or 2 quarters" of stress, then improvement in profitability and growth | No specific breakeven quarter given |
Sikka: "Give us 1 or 2 quarters and as a team, we can assure you once we are back into the game in terms of the growth and other steps supported by the market and also the initiatives which we have discussed on this call, you will see a much healthier numbers going forward."
Key Metrics
| Metric | Q2 FY25 |
|---|---|
| Bathware revenue | ₹360 cr, down 9% YoY |
| Bathware EBITDA | ₹34 cr |
| Consumer Appliances revenue | ₹83 cr |
| Consumer Appliances EBITDA | negative ₹7 cr |
| Pipes & Fittings revenue | ₹187 cr |
| Pipes & Fittings EBITDA | ₹13 cr |
| Bathware EBITDA margin (FY24) | ~16%, with 200 bps expansion targeted over 18–24 months (per an analyst's math: ~18% FY26) |
| TRUFLO volume growth | 11% YoY in H1 FY25 |
| TRUFLO sales growth | 38% in H1 FY25 |
| Working capital cycle | 74 days, improved from 86 days in Q1 FY25 |
| Faucets price hike | 1.5% average, taken in October |
| Sanitaryware cost of production | down 8% to 10%, expected to reflect in P&L from Q4 onwards |
| Bathware revenue mix (faucets vs sanitaryware) | ~41%–42% faucets, balance sanitaryware |
| Sanitaryware first-time throughput | ~84%–85%, improved from ~76%; with refire, 93%–93.5% (less than 7% wastage) |
| Roorkee plant first-year revenue estimate | ~₹150 cr to ₹160 cr, with approximate EBITDA of ~11% |