Key Takeaways
- Best-ever quarterly turnover: Revenue hit ₹262 crores, up >60% QoQ and ~15% YoY, driven by higher production volumes and national program deliveries.
- Defense order book is dominant: 70–80% of the order book comes from Army and Naval segments, with space contributing very little today.
- Export engine starting to fire: Exports crossed 12% of sales in Q2, with supplies to GE, Pratt & Whitney, and Rolls Royce; FY25 export target is ₹100–110 crores.
- Margins recovering from a low base: EBITDA rebounded to 22% in Q2 after a very weak Q1; H2 margins expected in similar lines with possible slight improvement as turnover scales.
- What to watch next quarter: Whether the ₹600+ crores of expected order inflow materializes, progress on the Pratt & Whitney long-term contract, and execution on the armor factory ramp-up.
Topline & Profitability Recovery
- Sharp sequential rebound: Turnover of ₹262 crores in Q2 was more than 60% higher than Q1, with value of production matching sales at ₹268 crores, pulling PBT and PAT higher.
- Volume-led growth: Management attributed the improvement to increased production volumes rather than one-off price effects, with titanium production expected to rise further in H2.
- H2 margin trajectory: Margins are expected to stay in similar lines to Q2, possibly improving slightly, because Q1 was an unusually low base; as sales turnover increases, a positive impact on margin parameters is expected.
- FY26 margin caution: Product mix will be the key variable; the order book is a mixed bag of high- and low-margin work, so the margin percentage is likely to remain in similar terms even as volumes increase.
- Inventory reduction push: Management is focused on cutting inventory through better yield (reducing scrap generation), higher scrap recycling, shorter cycle times, and optimized procurement as raw material prices ease.
Rao: "Second quarter of FY '25 has shown a good improvement, and we achieved 262 crores turnover, which is our best... we are expecting third and fourth quarter it will further improve."
Order Book & Inflow Outlook
- Defense-heavy composition: 70–80% of the current order book comes from Army and Naval segments combined; space is a very small contributor today, partly because the large ISRO plate requirement from FY23–24 has been largely completed.
- Near-term inflow target: Management expects to book not less than ₹600 crores in orders over the remaining months of FY25, which would push the year-end order book above ₹2,000 crores.
- Titanium order book: The titanium portion of the order book stands at approximately ₹600–700 crores, though a full material-wise breakup was not available on the call.
- White Plate Mill conservative target: The mill is expected to contribute around ₹150 crores this year, a conservative figure that may increase; new products like BHEL turbine blades are under development but are technologically challenging and not high-volume.
- Armor factory ramp-up: The factory is aiming to cross ₹100 crores but will likely fall on the lower side due to development work; first-time products for vehicle programs involve extensive testing and trials, with Q3 and Q4 expected to deliver similar figures.
Jha: "maximum order today we are running from the defense, and when I say defense, defense, we have the two types Arrow and the Naval put together is almost, I will say, 70% to 80% we have the order book from these two segments only and rest others, space is very less today."
National Programs & Product Development
- LCA Mark-2 and Sukhoi engine: MIDHANI supplied materials for the Light Combat Aircraft Mark-2 program (under development) and has started supplying materials for India's program to domestically manufacture the entire Sukhoi aero engine, with orders received over six-to-seven-month intervals.
- DRDO engine programs: Aero engine materials were supplied for DRDO programs including the ATDG Kaveri dry engine and the STF (small turbo fan).
- Superalloy breakthrough: The company developed high-end superalloy Inconel 718 in a 325 mm diameter (over 12 inches) with a defect level of around 1.2 mm, a difficult alloy used in aero engines.
- VAR furnace commissioned: A high-capacity Vacuum Arc Remelting (VAR) secondary melting furnace was commissioned in Q2; trial melts are complete and the furnace is now in continuous operation, with sufficient load to extract as much as possible in coming months.
Export Traction & Global Positioning
- Export milestone: Exports contributed more than 12% of sales turnover in Q2, with supplies made to GE, Pratt & Whitney, and Rolls Royce; the export order book is healthy and expected to increase further.
- FY25 export target: Management expects exports to touch around ₹100–110 crores for the full year.
- Long-term contract discussions: MIDHANI is working on a long-term contract with Pratt & Whitney and other aero engine manufacturing companies, a potential structural shift in export revenue visibility.
- Titanium casting export ambition: Current titanium casting capacity is sufficient for domestic industry; integrating with the international export market would require certain upgradation to align with major aerospace companies.
- AVISMA-VSMPO tie-up progress: Good progress has been made on a tie-up with the Russian titanium producer for rolling titanium slabs using MIDHANI's plate mills, with external parties approaching MIDHANI for slab-to-plate conversion.
- India's small global share: India serves less than 5% of international aerospace requirements today, per management, leaving a large addressable gap.
Jha: "India is doing only serving today, not more than 5% of the international requirements. I am talking only about the aerospace. If you see the aerospace sector itself, India is serving less than 5%, I will say, today."
Competitive Position & China Plus One
- Full-spectrum titanium capability: Management argued that MIDHANI's competitive moat lies in offering all titanium product varieties (round, flat, cast) under one roof, while any new entrant would need to build each capability separately.
- China Plus One tailwind: Global aerospace customers are actively looking at India under the China Plus One policy, creating what management called a "very good opportunity," though no specific contract wins from this dynamic were disclosed.
- Market size deflection: When asked for India and global market size data in value terms, management said it was "very difficult to tell the right figure" and offered to share data later, noting the study was done three to four years back and may need updating.
Jha: "I am not saying that there will not be a challenge, but we have technology for all the products. Because if somebody is going in titanium, they have to go for round, they have to go for flat, they have to go for this cast product. And MIDHANI, we have the all varieties of products available with us."
Operational Efficiency & Scrap Recycling
- Scrap consumption rising: Internal scrap reuse has reached about 40% of consumption, with virgin material down to 60%, a shift management credited for visible improvements in recent quarters.
- 40% scrap target: The plan is to sustain scrap consumption at about 40% in coming quarters, with virgin material at 60%, by identifying every production grid for scrap usage.
- Aerospace virgin-material constraint: Superalloy for aerospace applications requires 100% virgin material, so scrap recycling applies only to non-aero grids in steel and superalloy; titanium cannot use scrap at all.
- Scrap auction: Scrap that cannot be reused internally at MIDHANI is auctioned, providing a secondary recovery channel.
Muthukumar: "this scrap recycling, we have gone in a long way. That is the reason why you could able to see in the last fourth quarter, our virgin consumption has come down compared to previous quarter. It was about 60% and the scrap consumption has gone to about 40%."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Revenue growth | Double-digit growth, in the range of 20% | FY25 and FY26 |
| Order inflow | Not less than ₹600 crores in new orders | Remaining months of FY25 |
| Year-end order book | More than ₹2,000 crores | End of FY25 |
| Export revenue | ₹100–110 crores | FY25 |
| H2 margin | Similar lines to Q2, possibly improving slightly | Q3 and Q4 FY25 |
| White Plate Mill revenue | ₹150 crores (conservative), may increase | FY25 |
| Armor factory revenue | Aiming to cross ₹100 crores, likely on lower side | FY25 |
| Scrap consumption ratio | ~40% scrap, 60% virgin material | Coming quarters |
| CapEx | ₹60 crores | FY25 |
Key Metrics
| Metric | Q2 FY25 |
|---|---|
| Revenue | ₹262 cr, +15% YoY and +60% QoQ |
| Value of production | ₹268 cr |
| EBITDA margin | 22%, improved from Q1; Q1 was lower |
| Export revenue (H1 FY25) | ₹49 cr, full-year target ₹100-110 cr |
| Export share of sales | More than 12% of Q2 turnover |
| Order inflow (FY25 to date) | More than ₹1,000 cr booked; additional ₹600 cr expected in remaining months |
| Order book (end-FY25 expected) | More than ₹2,000 cr |
| Order book, defense share | 70% to 80% (Army plus Naval) |
| Order book, space share | 10% to 15% |
| Titanium order book | ₹600-700 cr, at least ₹600 cr |
| FY25 revenue guidance | ₹1,300-1,400 cr |
| Revenue growth target | Double digit, around 20% for FY25 and FY26 |
| Scrap consumption rate | 40% of input, up from 20-30% earlier; virgin at 60% |
| Titanium production share (H1 FY25) | 10% of output, up from 7% in H1 FY24 |
| White plate mill revenue (FY25 estimate) | ₹150 cr, conservative estimate |
| Armor factory revenue (H1 FY25) | ₹6-7 cr supplied; full-year target to cross ₹100 cr but likely lower |
| FY25 capex plan | ₹60 cr |