Key Takeaways
- Margin collapse on superalloy mix shift: EBITDA margin fell from 29% to 14.2% as superalloy volume jumped from 8% to 20% of total production, a structural shift management calls a "transition year."
- Revenue growth target of +20%: Management is targeting 20% top-line growth, citing new facilities and a focus on Titanium and Superalloys, though no breakdown was provided.
- Titanium ramp-up gated by sponge supply: A new melting furnace is ready and can process up to 1,000 tons, but execution waits on imported sponge from Kyrgyzstan; the benefit is expected "next year."
- Order book is short-cycle and fixed-price: Many orders turn in 3-4 months, variable-price space orders are exhausted, so near-term margin recovery depends entirely on raw material costs easing.
- What to watch next quarter: Whether the promised raw material benefit actually lifts margins back toward "normal rate" from Q1 FY25, and whether Titanium sponge arrives to unlock the idle furnace.
Margin Pressure: The Superalloy Story
- Product mix drove the margin drop: Superalloy production volume rose from 8% to 20% of total volume, and because these alloys carry different cost structures, the shift compressed EBITDA margin to 14.2% from 29% a year ago.
- Raw material prices amplified the pain: Nickel, molybdenum and cobalt prices stayed elevated through the quarter; the recent decline in Nickel will not benefit all supplies because many melting cycles were already completed.
- Competitor divergence explained by mix: When asked why a peer did not see similar margin erosion, management pointed to product profile differences, noting the competitor may not carry as much superalloy volume.
- Volume-over-margin strategy: Management explicitly prioritizes volume growth, accepting that "in absolute terms, your profit will increase, but the percentage terms it may remain on the lower side," with a possibility of balancing this next year.
- Benefit timing: Lower Nickel prices are expected to show some effect in Q4 FY24, with the effective impact starting from Q1 FY25, when margins are expected to return to "normal rate."
Dr. Sanjay Kumar Jha: "If you see that my total volume of production the super alloy production has gone up substantially. Earlier, if you see it was 8% of our total volume, this time it is 20%."
Titanium: The Idle Furnace and the Sponge Bottleneck
- New furnace ready, waiting on raw material: A Titanium melting furnace has completed initial trials with steel and a few Titanium melts, and is almost ready for production, but execution is stalled pending sponge imported from Kyrgyzstan.
- Order book constrained, not demand: The Titanium order book has risen substantially, but the company cannot execute because sponge supply is the binding constraint. Once sponge arrives, melting can start immediately.
- Capacity potential is material: Once operational, the new furnace enables MIDHANI to process up to 1,000 tons of Titanium, and management expects "next year, we will get the good advantage of this."
- Domestic sponge capacity ambition: Work is underway to enhance domestic Titanium production capability; if capacity can be increased by 4-5 times, the entire requirement could be met domestically, though no timeline was given.
Order Book & Revenue Drivers
- Short-cycle orders dominate: Many orders are not long-term contracts but purchase orders with 3-4 month cycles, and all current orders are fixed-price, with variable-price space orders already exhausted.
- Bar and wire facility modernization: Substantial progress in downstream facilities (wire drawing, finishing, heat treatment) is driving significant turnover growth, with potential to reach 10x compared to the last financial year.
- PSLV consortium supply: MIDHANI supplied a consortium for the PSLV launch vehicle outside the ISRO domain for the first time, completing the order in 3-4 months versus a typical 1-2 year cycle.
- Wide plate mill execution: The backlog for ISRO plates has been cleared extensively this year, with ₹200-250 Cr supplied, and the ₹400+ Cr customer advance used for this facility has been deployed.
- Armour factory sluggishness: Fresh orders in the current financial year have been very few (around ₹10 Cr), and some pending orders were not taken because the company lacked execution capability, though it expects to enter that domain this financial year.
Dr. Sanjay Kumar Jha: "We should try to increase our volume and that way in absolute terms, your profit will increase, but the percentage terms it may remain on the lower side."
Aerospace & Defence: The Indigenisation Pipeline
- HAL order is strategically critical: The ₹370 Cr order from HAL is essential for indigenising certain air force fleets; many orders are first-of-their-kind and, if delivered on time, will create recurring requirements.
- Adour engine supply established: MIDHANI is already supplying critical components for all Adour engine (Jaguar aircraft) overhauling requirements.
- LCA and GE engine certification underway: For the LCA program, MIDHANI is working to supply alloys to GE US now and get certified, so that when GE sets up manufacturing in India, Indian alloys are available. No commitment from GE to source from India has come yet.
- Indigenous engine program progressing: For the indigenous engine program, MIDHANI material has already been supplied, tested, and is working well.
- AMCA material development: MIDHANI is developing material for the Advanced Medium Combat Aircraft program, working with DRDO, GTRE, and DMRL.
- Alloy development track record: Management claims a near-100% success rate in alloy development: "Give us any composition, any alloys, MIDHANI can manufacture in one go only."
Dr. Sanjay Kumar Jha: "if we are able to deliver it on time, we will have a recurring requirement not only for MIDHANI, it is flight for the nation because aerospace order, which we received from HAL is very much required for our indigenization of some of the fleets of air force."
Capex, Facilities & Competitive Positioning
- New testing and forging capabilities: A fluorescent magnetic particle testing facility was commissioned in Hyderabad for aerospace finished component testing, and good progress was achieved on the isothermal facility for aerospace materials.
- Equipment procurement challenges: Plans for additive manufacturing metal powder equipment and an 8,000-ton compacting press face restrictions from European countries, posing a challenge to timelines.
- Capex run-rate: Approximately ₹80 Cr this year, with similar plans for next year, possibly increasing depending on equipment purchases.
- Defence corridor strategy: Setting up a MIDHANI-type facility in Defence corridors would have a 4-5 year gestation period and block significant capex, so management prefers enhancing capacity at the existing complex in a shorter time.
- Industry growth conviction: Management expects the defence and space sector to pick up "two times, three times in the next five years," with significant capacity addition expected in India over the next 4-5 years.
Dr. Sanjay Kumar Jha: "Defence industry and space sector is going to pick up two times, three times in the next five years."
What Management Declined to Answer
- Three-to-five-year order pipeline: Management declined to forecast, saying "I am not forecasting for the next three years, five years," offering only general commentary about LCA, missiles, and indigenisation thrust.
- Naval platform order specifics: When asked about share from naval platforms, management declined, stating "Submarine order quantity and all, we are not supposed to put in the public domain."
- Contract assets and customer advances: Management did not provide the December-end figures, explaining that orders are purchase orders of varying sizes, not contracts, and only bulk orders are disclosed per SEBI guidelines.
- Share of engine cost for LCA Mark 1A: Management did not give a number, instead discussing the broader transformation toward aero engines and certification work.
- Domestic Nickel and Titanium sourcing: An analyst asked about domestic sourcing given India's reserves; the response was not captured in the transcript.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| EBITDA margin recovery | Return to "normal rate" | From Q1 FY25 |
| Raw material benefit | Lower Nickel prices begin to show effect in Q4, effective impact from Q1 FY25 | Q4 FY24 / Q1 FY25 |
| Revenue growth | Targeting +20% | FY25 |
| Titanium furnace utilisation | Process up to 1,000 tons once sponge arrives | "Next year" (FY25) |
| Armour factory order | One order under negotiation | "May come in a couple of months" |
| Superalloy proportion | Will continue to increase next year | FY25 |
| Bar and wire facility turnover | May reach 10x vs last financial year | No date (ramp underway) |
Key Metrics
| Metric | Q3 FY24 |
|---|---|
| Revenue mix (9M FY24) | Superalloys 20%, Titanium alloys 9%, maraging steel 34%, special steel 27%, others 10% |
| Revenue mix (9M FY23) | Superalloys 8%, Titanium alloys 13%, hardened steel 55%, special steel 18%, others 6% |
| EBITDA margin | 14.2%, down from 29% in Q4 FY23 |
| Order inflow | ₹513 cr, including ~₹370 cr from HAL (aerospace) |
| Order book | ~₹1,750 cr |
| Q4 FY24 order inflow (to date) | ₹250 cr |
| Revenue growth target | +20% (FY25) |
| Superalloy production volume | 20% of total volume, up from 8% previously |
| Wide plate mill revenue (FY24 to date) | ₹200–250 cr |
| Armour factory fresh orders (FY24 to date) | ~₹10 cr |
| CAPEX (FY24) | ~₹80 cr |
| Titanium processing capacity potential | Up to 1,000 tons |
| Domestic Titanium sponge supply | 10–15% of requirement met domestically |
| Accumulated CAPEX (last 5 years) | ~₹800 cr |
| Customer advances for Wide Plate Mill | ₹400+ cr |