Key Takeaways
- Topline hit by war, but full-year growth held: Q4 FY22 sales fell to ₹323.29 cr (vs ₹345.87 cr in Q4 FY21) as the Russia-Ukraine conflict disrupted raw material supply and caused last-minute sales deferrals, yet full-year turnover still grew 5.7% YoY to ₹859 cr.
- New capacity is now revenue-ready: The wide plate mill and Rohtak armour plant are commissioned with a combined ₹100+ cr of orders already booked, and management is targeting ₹250-300 cr from the wide plate mill alone in FY23.
- Export push is deliberate and margin-dilutive by design: Exports grew more than 4x on a low base, but the board consciously accepted thin initial margins to penetrate international markets with competitive pricing and quality.
- Competitive insulation is eroding: One or two players have begun making common super alloy grades, and a titanium producer may emerge in the UP defence corridor, so margin pressure is expected and must be offset by operational efficiency.
- What to watch next quarter: Whether the wide plate mill can capture the titanium supply gap created by the Russia-Ukraine conflict, the pace of Nadcap certification (expected within six months), and any firm orders from the ASTRA missile program.
New Capacity & Revenue Drivers
- Wide plate mill: Commissioned in FY22 with the full product range demonstrated (low alloy steel, stainless steel, titanium alloys, super alloys, armour steel). Already receiving orders including a small token export order, with a target of at least ₹250-300 cr revenue in FY23.
- Wide plate mill unique positioning: The mill can roll plates up to 3 meters width, which is not available in most places. Management aims to capture this market and command a premium of ~₹20 more per unit versus normal 2-meter width steel.
- Wide plate mill value addition: The company plans to do value addition on products from the mill rather than just direct product sales, which will increase turnover.
- Rohtak armour plant: Starting FY23 with a healthy order book of ₹100 cr, with expected revenue of not less than ₹60-70 cr in FY23. Long-term potential is not less than ₹300 cr (10% of the ₹3,000 cr country market).
- Combined new capacity contribution: Wide plate mill plus armour together can add ~₹300 cr in FY23, potentially increasing to ~₹500 cr in the next couple of years.
- 8-ton vacuum induction melting furnace: Commissioned and proven successful; expected to contribute in the current financial year.
- Titanium shop: A dedicated facility is being established to enhance capacity for making titanium alloys, aimed at meeting requirements of international aerospace companies for use in moving parts of aero engine components.
- Carbon fiber project: DPR frozen; facility to be set up with NAL technology support, jointly by MIDHANI and HAL; location almost decided, official announcement shortly.
Dr. Sanjay Kumar Jha: "The wide plate mill in the oven itself it is a wide, the wide plate mill I can roll up to 3 meters width which is not available in most of the places. It is unique. So, I am trying to capture the market and the customers also. If we are able to capture and customers' confidence I get, I get some orders with some additional premium also."
Export Strategy & International Markets
- Export growth: Exports grew more than 4x in FY22 (on a low base) despite global supply chain disruption, described as a very significant achievement for international market presence.
- Ministry export target: The ministry has set a target to grow exports from ₹80-87 cr in FY22 to more than ₹350 cr in the next two to three years; management is working towards that.
- Deliberate margin sacrifice: The board took a conscious decision to operate with very low margins initially to penetrate the international market by being slightly cheaper than established players while offering better quality. As progress is made, some places are yielding good margin profit.
- Export product focus: Titanium alloys, special steels, and super alloys are the three major product areas being targeted for export.
- Export geographies: Germany, Turkey, Bahrain, France, US, UK, and deemed exports.
- Market penetration mechanics: Volumes are increasing year by year as customers test quality, processing, and certification; once satisfied with one grade, they increase quantity provided pricing is competitive.
- Titanium supply gap opportunity: Airbus indicated interest if India can supply titanium, given the disruption to the Russian supply chain. If MIDHANI can fill that gap, there is very good market potential.
- Nadcap certification: In advanced stage of approval, expected in the next six months. This will enable entry into the international aerospace market and allow foreign OEMs manufacturing in India to certify MIDHANI as a supply chain partner.
Dr. Sanjay Kumar Jha: "To penetrate the market, initially we have taken a conscious decision by the board that we will operate with a very less margin. So, with a less margin and with a better quality we are operating, but as we are progressing some places, we are getting good margin profit also."
Defence & Aerospace Opportunity
- Sukhoi engine indigenization: DAC clearance for indigenization of Sukhoi engine materials is a golden opportunity; MIDHANI already has technology and certification for raw materials, though component certification will take some time.
- Aerospace revenue share ambition: Could reach 30%-40% of total revenue if right order quantities materialize.
- ASTRA missile program: All materials supplied by MIDHANI; initial supply material already provided in advance; orders expected to flow from BDL. MIDHANI may get around ₹250 cr from the ₹3,000 cr ASTRA order.
- Defence growth imperative: To meet MoD targets of \$5B export / \$25B production, MIDHANI must grow at not less than 20%-25% per annum.
- Space segment shift: Space revenue share dropped from 56% to 45% due to a slowdown in space launches. Management expects space share to go further to around 40% or 35% as overall turnover increases, with absolute space turnover staying at the same level.
- Space sector policy tailwind: Policy shift to public-private participation means private sector investment is expected to pick up even if ISRO budget does not increase; five PSLV launches already bid out to consortia.
- Lockheed Martin discussions: MOA existed but was not converted to MoU. Discussions on 4-5 projects revealed Lockheed was interested in technology transfer to MIDHANI, not business flow from India. MIDHANI does not need outside technology, so discussions did not progress.
Dr. Sanjay Kumar Jha: "There is a target that unless you grow at the rate of 20%-25% per annum, you cannot catch to that level."
Margins & Competitive Dynamics
- Gross margin improvement: FY22 gross margin improved to ~78% from 74% in FY21 because higher value of production (₹989 cr vs ₹770 cr) spread fixed costs better, and raw material built up at pre-war (Ukraine) rates helped contain costs despite price increases.
- Raw material cost pressure: Expenditure increased due to rise in raw material prices, fuel costs, and power costs; without operational efficiency improvements, sustaining profit would have been very difficult.
- Import dependence: Raw materials like nickel, cobalt, moly are not available in India and must be totally imported. Pure iron has been indigenized with R&D support; titanium is similarly import-dependent.
- Internal scrap management: Internal scrap and rejected material inventory has been increasing over five years because the company manufactures very special alloys and strategic materials whose scrap cannot be sold in the open market, and orders lack uniformity so scrap must be stored until a matching order arrives. Consumption of internal scrap has increased progressively year after year, saving ~₹40-43 cr of raw material in FY22.
- Emerging competition: For super alloys, one or two companies have started making some common grades (small beginning, not full expertise). For titanium, MIDHANI is still the exclusive manufacturer but a company in the defence corridor of Uttar Pradesh has started working, so another producer may emerge shortly.
- Margin pressure expected: Management acknowledged that MIDHANI cannot claim to be the sole manufacturer of everything in the country today, so there will be pressure on margins. Sustainability depends on operational efficiency improvements, where there is a lot of opportunity.
- Order execution cycle shortening: Wide plate mill orders now require execution in 2 months / 10 weeks versus months or years previously, reducing cycle time and improving cash conversion.
Dr. Sanjay Kumar Jha: "MIDHANI cannot claim that MIDHANI is the sole manufacturer of everything in the country today, it was the earlier time. So, there will be a pressure on the margin, but then definitely somebody has to improve the efficiency, there is a lot of opportunity in that."
Other Projects & Pipeline
- Spring plant: Railway certification is on the way; once work starts, expects continuous flow of orders. Also looking at non-Railway customers.
- Powder plant: R&D activity that will take time to establish product in market; equipment itself will take 1-1.5 years. Expects technology and customer base to mature in parallel.
- Order inflow visibility: Visibility of around ₹1,200 cr for FY23; MoU target ~₹1,000 cr.
- Dividend: Final dividend of ₹1.54 per equity share declared for FY22, ~33% of PAT, highest in company history.
Dr. Sanjay Kumar Jha: "At the end of our discussion, it came out that they are basically interested in trying to get some technology transfer to us, not getting the business flow from India. So, that has not made us to progress much, because technology transfer as far MIDHANI we don't need the technology from the outside."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Wide plate mill revenue | At least ₹250-300 cr | FY23 |
| Armour plant revenue | Not less than ₹60-70 cr from ₹100 cr order book | FY23 |
| Combined new capacity (mill + armour) | ~₹300 cr, potentially rising to ~₹500 cr | FY23, next couple of years |
| Export growth | Grow from ₹80-87 cr to more than ₹350 cr | Next 2-3 years (ministry target) |
| Nadcap certification | Approval expected | Next six months |
| Defence growth rate | Not less than 20%-25% per annum | Ongoing (to meet MoD targets) |
| Space revenue share | Decline from 45% to ~40% or 35% as total turnover increases | As overall turnover grows |
| ASTRA missile opportunity | ~₹250 cr from the ₹3,000 cr order | When orders flow from BDL |
| Order inflow | Visibility of ~₹1,200 cr; MoU target ~₹1,000 cr | FY23 |
Key Metrics
| Metric | Q4 FY22 |
|---|---|
| Sales | ₹323.29 cr, vs ₹345.87 cr in Q4 FY21 |
| Value of Production (VOP) | ₹352 cr, +30% YoY vs ₹271 cr in Q4 FY21 |
| PBT | ₹110 cr, +8.8% YoY vs ₹101.53 cr in Q4 FY21 |
| PAT | ₹80.99 cr, vs ₹74.62 cr in Q4 FY21 |
| Full-year FY22 turnover | ₹859 cr, +5.7% YoY vs ₹813 cr in FY21 |
| Full-year FY22 VOP | ₹988 cr, +28% YoY vs ₹771 cr in FY21 |
| Full-year FY22 PBT | ₹239.12 cr, vs ₹226 cr in FY21 |
| Full-year FY22 PAT | ₹176.31 cr, vs ₹166.29 cr in FY21 |
| Final dividend per share | ₹1.54, ~33% of PAT, highest in company history; interim dividend of ₹1.56 already paid |
| Order book | ₹1,317 cr, similar to 1 April 2021 level |
| Order inflow visibility for FY23 | ~₹1,200 cr |
| MoU target for FY23 | ~₹1,000 cr |
| Export growth | >4x YoY, on a low base |
| Export target from Ministry | >₹350 cr in next 2–3 years, from ₹80–87 cr this year |
| FY22 revenue breakup | 45% space, 21% defence, 21% PSUs (also defence), ~10% exports, balance others including energy |
| Internal scrap consumption savings | ₹40–43 cr of raw material saved in FY22 |
| Wide plate mill revenue target for FY23 | ₹250–300 cr |
| Armour plant expected revenue for FY23 | ₹60–70 cr, with order book of ₹100 cr |
| ASTRA missile opportunity | ~₹250 cr from the ₹3,000 cr total order |
| Growth rate expectation | 20–25% per annum to meet defence production targets |