Key Takeaways
- Execution, not orders, is the bottleneck: Order inflow is strong and the pipeline is deep, but management flagged that converting the backlog quickly is the real challenge, especially for short-tenure contracts.
- New capex is now operational, but output will lag: The wide plate mill, Rohtak armor facility, and 8-tonne VIM are all running, yet revenue impact will only be visible in coming years because defence qualifications take time.
- Margin pressure is structural, not just cyclical: Management guided operating margins down to 25-30% from historical highs, citing competitive product mix and raw material volatility with no pass-through mechanism.
- Export pipeline is building from a low base: Direct export order booking was only ~Rs.35 crores in FY23, but the company is targeting ~Rs.100 crores in FY24, supported by trial orders from SpaceX's supplier, Pratt & Whitney, and GE Healthcare.
- What to watch next quarter: Whether the ~Rs.500 crores of expected Q1 order inflow materializes, progress on Pratt & Whitney and Rolls Royce supplier approvals, and any movement on the NALCO JV re-evaluation.
New Capacity: Commissioned but Not Yet Contributing
- 8-tonne VIM furnace: Crossed 100 heats and captured output of alloy C-276, a critical import-substitution grade for the energy sector.
- Wide plate mill: Enabled in-house production of C-276 plates and sheets, replacing imports, and allowed development of armor steel plates for vehicles at the Rohtak facility.
- Rohtak armor facility: Now producing armor steel plates that were previously sourced externally; bulletproof jacket "Garuda" developed for the Air Force at BIS level 6, NIJ-4, with supply to complete the order in the next month.
- Skull melting furnace: Commissioned and making special alloy for biomedical applications under trial; once material is approved, it opens a new business horizon.
- 10-tonne VAR: At the new titanium plant, almost ready to commission very shortly.
- Revenue conversion is slow by design: This year is for product development using these facilities; the output impact will be seen only in coming years because defence items take time to get qualified.
- Rohtak and wide plate mill steady state: Put together, may reach a revenue level similar to Rs.500 crores, but many things still need to stabilize; margins are expected to improve as they do.
Dr. S.K. Jha: "Orders is not the issue. How quickly you can execute and give to the customer this is the challenge, because nowadays if you are going to the segment where it is not a long-term project, we have to supply the material in very short time."
Export & Customer Qualifications: Early-Stage Breakthroughs
- SpaceX supply chain entry: Supplied Alloy 108 rings to a US firm that supplies SpaceX for their launch vehicle; a small evaluation order, with commercial orders expected after successful evaluation.
- Pratt & Whitney: Three orders received from Poland; expecting orders from Canada and other countries; audit for supplier approval expected next month.
- GE Healthcare: Approved MIDHANI for special alloy 909 used in healthcare systems; initial orders already received and MIDHANI will be one of their approved suppliers.
- Rolls Royce: Audit completed; initial requirement order received and will be executed.
- US oil & gas: A leading US company gave a trial order; once approved, MIDHANI will become a regular supplier.
- Israel Rafael: Already supplying maraging steel for their application.
- Other export markets: Supplies going to Sweden, Turkey, and Germany for different requirements; market survey across countries shows many products MIDHANI can export in a big way in the coming future.
- Export order booking: Direct export order booking was almost Rs.35 crores in FY23; targeting ~Rs.100 crores (10% of sales) in FY24; ~Rs.200 crores worth of export enquiries are pending.
Dr. S.K. Jha: "We have supplied Alloy called Alloy 108 rings to the USA and that firm is supplying to the SpaceX for their launch vehicle. So this was a very small amount of order, but it has gone for the evaluation. Once it is successfully evaluated they are going to place the order for these rings from our company."
Order Book & Segment Mix
- Defence dominance rising: Defence order position has gone up to 40%; combined with armor, navy, and other defence, the share reaches 60-70%.
- Space share declining but expected to recover: Space has come down to ~30%, but management expects it to pick up again because launches are picking up.
- Aerospace: Highest ever aerospace order booking at Rs.130 crores; super alloys order booking at almost Rs.138 crores.
- Railways: Currently ~2-3% of mix; 400 axles supplied to ICF; Container Corporation of India gave a trial order of 540 numbers, with a tender for another 20,000 numbers expected on successful completion within two months.
- Energy sector: Good possibility, especially for special grades like C-276 where MIDHANI will become the sole indigenous supplier.
- License programs: Executing for AMCA program, Kaveri dry engines for unmanned air combat vehicles, LCA, and analyzing materials for Sukhoi aircraft engine.
- Q1 order inflow expectation: Expecting to book ~Rs.500 crores in Q1 itself, with price-negotiated orders of Rs.550 crores expected in Q1 only.
Margins: Structurally Lower, Raw Material Risk Unhedged
- Operating profit margin guidance: 25% to 30%, down from historical levels, because the company is entering products that are highly competitive in nature.
- Raw material cost is ~35.5% of value of production: Major input costs (raw material, fuel, power) are volatile; if prices rise after an order is taken at low prices, there is no scope for compensation from the customer.
- Finance cost pressure: Interest lending rates are high, adding pressure on profitability even when EBITDA is managed.
- Scrap optimization as a partial offset: Scrap usage doubled in tonnage from the previous year; ~60% scrap used in Q4 vs 40% last year; scrap management team optimized usage across 100+ grades without mixing purity.
- Raw material cost management: Moly prices rose, so the company bought only emergency requirements; subsequently moly fell ~40%, saving ~Rs.4,000 per kg; nickel stabilized at $22/kg; inventory level now ~Rs.100 crores.
- VSSC dispensation on scrap: VSSC has given a dispensation that 80% of the scrap can be used in their product, helping reduce fresh raw material consumption on high-margin space orders.
Dr. S.K. Jha: "Operating profit margin, I don't think it will be maintained at that level because once you are going in the products which are highly competitive in nature in the market, that much margin may not be there, but we will try to see that how we can improve."
Balance Sheet & Capital Allocation
- Inventory reduction target: Target to reduce inventory by Rs.100-120 crores in FY24; inventory had risen because new facilities started and production timelines caused quantities to sit in inventory; Q4 inventory already came down vs Q3.
- Scrap inventory: Scrap value has gone up because raw material prices have risen; scrap is valued at 90% recovery rate of material content (moly, nickel, etc.); once scrap is used, the quantity will come down.
- Debt repayment: Rs.100 crores of long-term debt; repayment starts this year at Rs.20 crores per year.
- CAPEX: Not stopping; targeting ~Rs.100 crores this year for augmenting capacities and modernizing old equipment to meet international customer requirements and increase volume; planning to meet CAPEX from internal generation only.
- NALCO JV under re-evaluation: A consultant report showed that product requirement for the planned facility is very low in the country, with projections not reaching even 10% of earlier estimates; the company is rethinking whether to go ahead.
Dr. S.K. Jha: "to our surprise, the consultant has given that requirement of product which you wanted to plan in that facility is very less in the country. So earlier report projections were very high that projections are not reaching even to the 10% also of that whatever we wanted to make there."
New Products & Operational Milestones
- C-276 indigenization: The wide plate mill enables 100% indigenization of C-276 plates and sheets, capturing a Rs.250-300 crore imported market; MIDHANI will be the only domestic party able to supply, mainly for the energy sector.
- Pipe extrusion: A new technology for MIDHANI; Rs.5 crores of business done last year from this facility.
- CNC machines for axles: Two CNC machines worth ~Rs.10 crores installed to enhance axle productivity.
- Garuda bulletproof jacket: First time developed in the country for the Air Force; production at BIS level 6, NIJ-4; acceptable to airports; supply to complete the order in the next month, with efforts to extend to other armed forces.
- Tata Boeing & Safran: Discussions underway with Tata Boeing to meet their requirements; evaluating how to enter the Safran supply chain.
- ISRO/PSLV orders: Five PSLVs outsourced to private firms; MIDHANI is in the process and expecting an order anytime; ~Rs.100 crores order expected from L&T who is the supplier.
Dr. S.K. Jha: "Scrap management team has done a very good job and this is a total achievement of our operational team, they have done very good job by optimizing this because purity of the material is very important and we are not using only one grade, two grades, we are getting more than 100 grades."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Revenue growth | Around 20% growth expected; "not less than 20% in the future" | FY24 and beyond |
| Operating profit margin | 25% to 30% | Ongoing |
| Export sales | Targeting 10% of sales, around Rs.100 crores | FY24 |
| Inventory reduction | Reduce by Rs.100-120 crores | FY24 |
| Q1 order inflow | Expecting to book ~Rs.500 crores; price-negotiated orders of Rs.550 crores expected in Q1 only | Q1 FY24 |
| CAPEX | ~Rs.100 crores, funded from internal generation | FY24 |
| Debt repayment | Rs.20 crores per year on Rs.100 crores long-term debt | Starting FY24 |
| Axle orders (Container Corp) | Tender for 20,000 numbers expected on successful completion of 540-number trial within two months | Within two months |
| Pratt & Whitney supplier approval | Audit expected next month | Next month |
| Garuda bulletproof jacket supply | Complete the order in the next month | Next month |
| 10-tonne VAR commissioning | Almost going to commission very shortly | Very shortly |
Key Metrics
| Metric | Q4 FY23 |
|---|---|
| Revenue | ~₹900 cr (full year FY23), flat over last three years |
| Profit after tax | ₹217 cr (FY23), up from ₹180 cr five years ago |
| Operating margin guidance | 25% to 30% range expected going forward |
| Raw material cost as % of value of production | 35.5% |
| Revenue growth guidance | ~20% expected for FY24 |
| Order booking | ₹900+ cr in FY23 |
| Order book | ~₹1,350 cr, ~90% short-cycle (less than six months) |
| Order inflow expected in Q1 FY24 | ₹550 cr price-negotiated orders expected |
| Aerospace order booking | ₹130 cr, highest in company history |
| Super alloys order booking | ~₹138 cr in FY23 |
| Direct export order booking | ~₹35 cr in FY23 |
| Export sales target | 10% of sales, around ₹100 cr for FY24 |
| Export enquiry pending | ~₹200 cr |
| Revenue segment split | Space 40%, Defense 24%, PSU (mainly defense) 21%, Energy & others 6%, Export 5% |
| Inventory | ₹1,225 cr, up from ₹500 cr five years ago; reduction of ₹100-120 cr targeted in FY24 |
| Debt | ~₹500 cr total; ₹100 cr long-term (repaying ₹20 cr/year), ₹300 cr working capital |
| CAPEX spent in FY23 | ~₹70 cr |
| CAPEX target for FY24 | ~₹100 cr |
| Scrap usage | 60% in Q4 FY23, up from 40% in Q4 FY22 |
| Raw material inventory | ~₹100 cr |
| Moly price | ~₹5,000/kg, down from ₹9,000/kg earlier |
| Nickel price | \$22/kg, down from \$100/kg earlier |
| C-276 import substitution opportunity | ₹350-400 cr total market being imported |
| Wide plate mill and Rohtak facility combined revenue expectation | ~₹500 cr in steady state |
| Axles supplied to railways | 400 in FY23; 1,500 orders in hand; trial order of 540 from Container Corporation |
| Potential axle tenders | 20,000 from Container Corporation, 20,000 from railways |