Key Takeaways
- Flat top-line, strong bottom-line: Revenue grew just 0.13% YoY, but EBITDA rose 11.1% and PAT jumped 20.61%, driven by working capital discipline and inventory reduction.
- Margin reset is structural, not cyclical: EBITDA margins have compressed from a historical 25-30% range to ~23% as the revenue mix shifted from high-margin Space to lower-margin Defence, now 70% of sales. Management sees 24-25% as the new normal, with a path to 25% in FY26.
- The capex cycle is only starting to pay off: The INR800 crores invested over five years, especially the INR600 crores Wide Plate Mill, is in early development. Full utilization is years away, but when it arrives, management says margins will "go up drastically."
- Export story gaining traction: Exports nearly tripled excluding deemed exports, and international OEMs like GE and Safran are now certifying MIDHANI's plants. The FY26 export target is INR120-150 crores.
- What to watch next quarter: Whether the INR1,500 crores order pipeline converts, clarity on the long-term capex project with partners, and any quantification of the Wide Plate Mill's asset turnover.
Revenue Mix & Margin Structure
- The Defence pivot compressed margins: Over 5-7 years, Defence revenue share rose from 30% to 70% of the mix. Defence orders are won competitively against private and imported parties, forcing MIDHANI to match lower price points, while legacy Space work carried structurally higher margins.
- Space is cyclical, not lost: Lower Space revenue reflects order timing, not program attrition. Orders are in final negotiation stages, and MIDHANI remains the sole supplier of maraging steel plates to ISRO for programs like SBS 3.
- Raw material stability restored: Prior years saw raw material cost spikes hurting the balance sheet. Management says costs have now stabilized and the trend is expected to continue. No raw materials are currently imported from China, and non-Chinese alternatives exist.
- Scrap recovery as a margin lever: MIDHANI is collaborating with CSIR labs to extract precious materials from high-value scrap, with encouraging early results. Increased scrap usage reduces dependence on virgin raw material and supports the margin improvement target.
T. Muthukumar: "See, this EBITDA margin does not depend -- it also depends upon the products which we make it. Say, whatever earlier which were there, the product range was different where we have been producing mostly for space. Now the environment slightly got changed. Most of the orders, we are taking on a competition rate with the private parties and imported parties."
Capex & Capacity: The Wide Plate Mill Bet
- Strategic intent: The INR600 crores Wide Plate Mill was built for import substitution, targeting Titanium plates and hard Aluminum alloys (2000, 6000, 7000 series) for Aerospace that were previously imported. MIDHANI recently rolled Aluminum of width >1 meter for the aero sector for the first time.
- Utilization is still low: The mill is in a development phase and capacity utilization remains low. Management says it will "take some more time" to reach full production, and good returns are expected over a period of two years.
- Titanium shop recovered from a supply shock: A six-month geopolitical disruption in master alloy supply constrained FY25 production. MIDHANI has since indigenized some master alloy and expects 100% utilization in FY26.
- Superalloy and Titanium alloy shops are full: Both are running at full utilization currently, and MIDHANI considers itself competitive globally in these specialized grades, describing Aerospace-grade alloy-making as "an art" mastered by very few.
- Ongoing capex: INR50 crores was invested this year for infrastructure, with a plan to invest INR75-100 crores annually. A larger long-term project with partners is under discussion, with more clarity expected next quarter.
Management: "No, see, without the plate mill at a higher capacity, we are expecting minimum around 24%, 25% EBITDA margins without the Wide Plate Mill. When the Wide Plate Mill would be to a full swing, then definitely our margins will go up drastically."
Order Pipeline & Growth Drivers
- INR1,500 crores in the pipeline: Orders are at various procurement stages across Aero, Space, Defence and Navy. Big orders are expected, though no specific conversion timeline was given.
- HAL engine program: A current order of INR650 crores is in hand, with another INR300-350 crores in process. MIDHANI is associated with HAL for indigenization of engines and is the sole supplier of metals and alloys for the Kaveri engine program.
- Live-testing builds confidence: Materials supplied for recent operations were live-tested successfully, which management expects will lead to more Defence orders.
- Gun barrel opportunity: Discussions are underway for gun barrel supply; clarity may come next quarter.
- Rohtak plant remains sub-scale: The order book is low at ~INR10 crores, focused on body and vehicle armoring. Management aims for INR50 crores in order booking for FY26.
- New alloys in development: An alloy for ultra-high supercritical thermal power plants has been developed and supplied successfully. Diversification into healthcare, oil & gas and energy sectors is underway, with impact expected to be visible in coming years.
Export Trajectory
- Threefold growth ex-deemed exports: Exports grew nearly threefold, signaling growing global acceptance. The FY26 target is INR120-150 crores, with management noting that another 3x jump may be too ambitious but the figure will improve.
- OEM certifications in progress: International customers including Safran and GE have started certifying and inspecting MIDHANI's plants. GE is in discussion and listing MIDHANI's facilities, which management sees as validation of competitiveness and reliability.
- Europe rearmament tailwind: Management expects to benefit from export orders linked to European defence spending increases, though the real impact has not yet been assessed.
S.V.S. Narayana Murty: "So we expect to continue the same trend because we are competitive and people are looking at us as a reliable supply partner."
Competitive Position & Supply Chain
- Specialized, narrow moat: Superalloys and Titanium alloys are practiced by a handful of players globally. MIDHANI claims to have mastered the art of making Aerospace-grade alloys and considers itself quite competitive.
- Raw material indigenization underway: 23 raw materials are being addressed for indigenization over a 5-10 year timeframe. Master alloy indigenization has already resolved the Titanium shop's supply bottleneck.
- Self-sufficient in Titanium raw material: When asked about sourcing from PTC Industries, management firmly stated MIDHANI has established its own sources and is self-sustained.
- No China dependency: No raw materials are currently imported from China, and non-Chinese suppliers are available if needed.
S.V.S. Narayana Murty: "Yes, we are competitive in Superalloys. Yes, and our -- see, this is a specialized business, okay, both Superalloys and Titanium alloys is a specialized business, which is practiced by a very handful of people around the world. And making the alloys to the requirement of Aerospace grade is an art. So that we have mastered that and we are quite competitive."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Revenue growth | ~20% YoY growth possible | FY26 |
| EBITDA margin | ~25%, driven by volume, scrap utilization and operational efficiencies; minimum 24-25% without Wide Plate Mill at higher capacity | FY26 |
| Export revenue | INR120-150 crores | FY26 |
| Titanium shop utilization | 100% utilization expected | FY26 |
| Rohtak plant order booking | Aiming INR50 crores | FY26 |
| Annual capex | INR75-100 crores every year | Ongoing |
| Wide Plate Mill returns | Good returns expected; margins to "go up drastically" at full swing | Over a period of 2 years |
| Long-term project with partners | Under discussion; more clarity expected | Next quarter |
| Gun barrel order | In discussion; clarity expected | Next quarter |
Key Metrics
| Metric | Q4 FY25 |
|---|---|
| Quarterly turnover | ₹410.56 cr, highest ever, +1.25% YoY |
| FY25 annual turnover | ₹1,074.1 cr, highest ever, +0.13% YoY |
| FY25 EBITDA | ₹248.97 cr, +11.1% YoY |
| FY25 PAT | ₹110.07 cr, +20.61% YoY vs ₹91.26 cr in FY24 |
| FY25 EBITDA margin | 23% plus, down from 25-30% range in earlier years due to product mix shift toward Defence |
| Order book (as on Apr 1, 2025) | ₹1,832 cr, Defence 84%, Space 8%, Energy 2%, Exports 2%, rest 3% |
| FY25 order inflow | ~₹1,400 cr booked |
| FY26 expected order inflow | ~₹1,500 cr anticipated from pipeline |
| FY25 exports | ₹94 cr, nearly 3x YoY excluding deemed exports |
| FY26 export target | ₹120-150 cr |
| FY25 revenue mix | Defence 37%, PSUs 37%, Space 11%, Exports 9%, Miscellaneous 5%, Energy 1% |
| FY25 capex | ₹50 cr |
| FY26 planned capex | ₹75-100 cr |
| Inventory reduction | ~₹8.5 cr decrease during FY25 |
| Titanium plant capacity | 250-300 tons per month, full utilization expected in FY26 |
| Rohtak plant order book | ~₹10 cr remaining; FY26 sales target ~₹30 cr |
| HAL order | ~₹650 cr current, another ₹300-350 cr in process |