Key Takeaways
- Sharp QoQ rebound, but YoY still soft: Revenue rose 20.85% QoQ to INR40.23 crores and EBITDA jumped 144.5%, yet performance remains below the prior year due to U.S. geopolitical headwinds.
- Beryl acquisition is the new growth engine: The closed deal adds residential permit/approval services and a scalable offshore model; consolidation begins November 1, so Q3 will show its first meaningful contribution.
- U.S. construction confusion is clearing: Tariff uncertainty dampened demand, but clarity is emerging and the Q2 sequential recovery reflects that thaw.
- Operating leverage is the margin story: The sunk-cost employee base means top-line growth drops almost entirely to the bottom line, a dynamic already visible in the 144.5% EBITDA surge.
- What to watch next quarter: Beryl’s first consolidated contribution, the pace of county expansion beyond Florida, and whether tariff clarity unlocks the Interarch partnership.
Beryl Acquisition & Residential Expansion
- What Beryl does: A 40-person Tampa firm providing structural engineering, property inspections, expert witness services, and crucially, permit/approval processing across 2 Florida counties, with a 13-year track record.
- The offshore arbitrage: Roughly 50–55% of Beryl’s turnover (structural designing and permit approval) can be outsourced to India, with only monitoring persons retained onshore; inspections and expert witness work require U.S. presence.
- Margin transformation target: Beryl currently operates at 7–8% EBITDA; management expects the offshore shift to lift that to 15–20% EBITDA over the next few quarters, while top-line grows at least 20–25%.
- County-by-county expansion: The permit/approval model can expand across 3,000 U.S. counties; the immediate plan targets Georgia (where Mold-Tek has an Atlanta office), with more counties added year by year as the team strengthens.
- Knowledge transfer underway: Mold-Tek will send senior engineers to Florida in December; Beryl’s team arrives in India in January for a couple of months to train Mold-Tek engineers on methods.
- Equity alignment: Beryl’s promoter, Mr. Richard Leon Cannyn, will take equity participation in Mold-Tek in the coming months, subject to statutory clearances.
J. Lakshmana Rao: "So this synergy is going to take Mold-Tek into a much bigger leap in civil services in U.S.A."
U.S. Market & Demand Recovery
- The tariff overhang: The U.S. construction industry was dampened by new tariffs and confusion about the future, but things are now getting clarified, which drove the considerable Q2 sequential growth.
- Residential volume advantage: Residential projects are much bigger in volume than commercial/industrial; each project may be $20k–$50k (or $5k for small expansions), spread across many individual house builders plus semi-commercial establishments like schools, hostels and motels.
- Permit process is universal: Counties hold permit/approval authority for all building types (residential, commercial, industrial, high-rise); basic approvals cover plans, layout, environmental, social and location factors, with industrial structures needing only additional statutory clearances.
- Demographic tailwind: Retiring U.S. manpower in inspections and permit services is not being replaced, creating a structural supply gap that Beryl’s model can fill.
J. Lakshmana Rao: "The reasons are the retiring manpower in U.S.A. who are mainly in inspections and this kind of permit services and there's not much of replacement happening."
Strategic Partnerships
- Interarch (pre-engineered buildings): Mold-Tek will provide designing, detailing, stamping and monitoring while Interarch supplies buildings; work is stalled pending tariff clarity, though interest remains strong for Indian-designed building systems supplied directly.
- Affordable Robotic (robotics): A strategic partnership has been signed, though no further details were disclosed on the call.
J. Lakshmana Rao: "Unfortunately, the tariff confusion has stopped, has not given us the kind of push, but a lot of people are interested to have even building systems supported with Mold-Tek design being supplied directly from India."
Mechanical & Diversification
- Current mechanical segments: Automotive (Tier 1 suppliers, body manufacturing), utility space (power transmission substations, civil-mechanical combination), and industrial machinery/special purpose machines, the latter being a diversification play to derisk from automotive.
- Transmission line opportunity: Data center build-out is driving demand for transmission line design, tower design and substation design near data centers; Mold-Tek has 60–70 resources in this line with 8–10 years of experience.
- Planned expansion: The company plans to enter conductor and line design (beyond just poles and towers) in a couple of quarters, which will augment its status and expand revenues.
- Plant engineering: A team is slowly being built; a couple of inquiries may be taken up in the next couple of quarters.
- Europe is mechanical-only: No civil engineering activity in Europe due to different standards, less attractive pricing and less aggressive workflow; only precast concrete design for a couple of clients, with all other European work being mechanical engineering.
- Mexico and Europe as developmental centers: Deeper client relationships in these regions could eventually turn them into developmental centers in India, though this is a possibility, not a near-term plan.
Margins & Operating Leverage
- The sunk-cost advantage: Employees are already in place and will not be removed for small workflow drops, so when top-line improves, the bottom line picks up the full benefit.
- Standalone margin improvement: Expected for FY27 as operating leverage kicks in.
- Beryl margin timeline: The shift from 7–8% to 15–20% EBITDA may start slowly in the next 6 months as more work moves to India.
J. Lakshmana Rao: "from the current level of 7%, 8% EBITDA, they can easily go up to 15% to 20% EBITDA levels. And with the top line also growing at least 20% to 25%. So there will be a considerable improvement in EBITDA in Beryl's operations probably from next few quarters."
AI & Engineering Workflow
- AI saves time on routine work: Routine engineering jobs can now be done without sparing much time, creating considerable time savings.
- But the bottleneck remains human: Routine work still needs inspection and certification by a professional engineer; stamping, applying to municipalities and following up for clearances remains more or less the same workload.
- Beryl’s AI capability: Beryl has already developed an AI-modelled plan review and permit processing procedure.
J. Lakshmana Rao: "AI helps in making routine work easy. And in engineering, though it is a routine work, it needs to be inspected and certified by a professional engineer who need to go through the detail. But the routine jobs can be done without sparing any much time. So there will be a considerable time saving in routine jobs. But when it comes to the stamping and applying to the municipalities and following up for the clearances, the work remains more or less same."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Beryl consolidation | First meaningful contribution to consolidated accounts | Q3 FY26 (from November 1) |
| Beryl EBITDA margin | Improve from 7–8% to 15–20% | Next few quarters; may start slowly in next 6 months |
| Beryl top-line growth | At least 20–25% growth | Ongoing |
| County expansion | Enter counties in Georgia, then expand year by year | Starting from current year |
| Knowledge transfer | Mold-Tek engineers to Florida (December); Beryl team to India (January) | Dec 2025–Jan 2026 |
| Equity participation | Beryl promoter to take equity in Mold-Tek | Next few months, subject to statutory clearances |
| Transmission line expansion | Enter conductor and line design | Couple of quarters |
| Plant engineering | Take up a couple of inquiries | Next couple of quarters |
| Standalone margin improvement | Operating leverage to lift margins | FY27 |
Key Metrics
| Metric | Q2 FY26 |
|---|---|
| Revenue | ₹40.23 cr, +20.85% YoY |
| EBITDA | ₹5.96 cr, +144.5% YoY |
| Profit after tax | ₹3.24 cr, +2% YoY |
| Civil engineering work on hand | $4.2 mn to $4.3 mn, considerably higher than earlier quarters |
| MES work on hand | ~$600,000, up from $150,000 last quarter |
| Beryl acquisition purchase price | 0.5x revenue, approximately 7x EBITDA |
| Beryl last fiscal year revenue | $5.6 mn |
| Beryl last fiscal year profit | ~$0.5 mn |
| Beryl current EBITDA margin | 7% to 8% |
| Beryl target EBITDA margin | 15% to 20%, with top line growth of at least 20% to 25% |
| Beryl expected FY26 contribution | $2.5 mn to $3 mn, 5 months consolidated from November 1 |
| Beryl offshorable work portion | More than 50% to 55% of turnover, with at least 25% to 30% target for Indian operations |
| Mechanical division headcount | More than 250 people deployed |
| Transmission and substation design resources | 60 to 70 resources, over the last 8 to 10 years |