Key Takeaways
- Record quarter, momentum intact: Operating revenue surged ~82% YoY to over INR967 crores, driven by a 154% 9-month jump in room ACs. Management raised FY25 group revenue guidance to ~INR5,100 crores.
- Outsourcing tide is turning back: After years of in-sourcing by brands, supply chain pain and cost math are pushing the industry back toward outsourcing, a structural tailwind PG Electroplast is already riding.
- Backward integration is the next margin lever: A compressor manufacturing tie-up is in advanced stages, with a building already under construction and initial production targeted within 9 months of finalization.
- New vectors are forming: The company announced an EV assembly business and is evaluating further new products, while the electronics EMS business is gaining outside traction, albeit at low margins but high asset turns.
- What to watch next quarter: FY26 guidance and capex plan, formalization of the compressor JV, the Bhiwadi plant ramp-up, and any update on new product initiatives.
The Outsourcing Tailwind
- The pendulum swing: From 2020 to last year, RAC outsourcing fell from 40-45% to 37-38% as brands built in-house capacity. Supply chain challenges and the economic reality that in-house costs typically exceed outsourcing pricing are now driving a reversal.
- Market share proof point: Brands doing more outsourcing are gaining market share, a dynamic that directly benefits PG Electroplast as a scaled contract manufacturer.
- Client scale-up cycle: New clients added in the last two years are now entering their second and third seasons, the period when volumes materially ramp. The company is seeing very large scale-up from these clients and gaining share within most of them.
Pramod Gupta: "That debate, I think, probably has been put to rest if this trend continues next year also. So it's a single data point, but let's hope to see if this trend of outsourcing continues, then we will probably be over with that in-sourcing versus outsourcing debate."
Product Division: Growth & Mix
- AC dominance: Room AC contributed INR1,636 crores in 9 months, up 154% YoY. The season started early this year, unlike last year when Q3 was painful due to a late start. Q4 ordering remains very strong, largely driven by AC.
- Washing machines and coolers: Washing machines grew 49% YoY and coolers surged 127% YoY. Washing machines carry a higher gross contribution than ACs, so the quarterly mix shift affects margins.
- Q3 margin mechanics: Gross margin declined QoQ from Q2 because Q2 had a higher proportion of washing machine sales. On a 9-month basis, margins improved slightly due to cost management, reduced commodity prices, and operating leverage.
- ASP pressure is benign: Average selling prices for most products are slightly lower YoY, largely a pass-through of reduced commodity costs. Lower raw material costs optically inflate percentage margins on similar or slightly lower top lines.
- Q4 margin outlook: Operational margin should stay in a similar range as Q3, with an additional bump from PLI recognition when government money is received.
Backward Integration & The Compressor Bet
- The opportunity: In ACs, the major backward integration opportunities lie in compressors and motors. The company is at a very advanced stage of finalizing a tie-up for compressors.
- Timeline: A building is already under construction. Once the agreement is finalized, management expects to start initial production within 9 months, with full ramp-up in another 3 months.
- PLI constraint: The company could not apply for the new PLI scheme for compressors because the INR250 crore minimum investment threshold was too onerous given existing PLI commitments.
- Scale viability: Management pushed back on analyst estimates that 1-1.5 crore pieces are needed for viability, stating their own math points to much lower numbers. Details will be shared once the agreement is finalized.
- Captive component strategy: The company has taken PLI for components but intends to use them captively for own finished products, an approach it calls next-generation manufacturing. The component business itself is not a focus area and has seen much lesser scale-up than finished goods.
Pramod Gupta: "The building is already under construction. We expect to start initial production in next 9 months once we finalize from the moment we finalize, 9 months is, I think, is a good period that we'll be able to start the initial production and another 3 months to fully ramp up that production."
New Business Vectors
- EV assembly: A new segment announced: electric vehicle assembly, including both the vehicle and the battery. Currently working with a single client; no other clients in mind. Hope to start production in the next 2-4 months.
- Electronics EMS: The electronics business is relatively large, with all controllers and TV motherboards made in-house. The company is now offering these services externally with good traction. Margins are low at 2-4% given the EMS nature, but asset turns are very high.
- IT hardware PLI: No major success yet under the IT hardware PLI scheme. The company is still scouting for clients and looking for business, with no big breakthroughs. This sits in the JV (Goodworth Electronics), not the main company.
- New products in pipeline: Management is evaluating opportunities continuously, conscious of capital allocation and margin profiles. Some initiatives are in final stages; announcements will come when finalized, with updates expected in Q4.
Capacity, Capex & Capital Allocation
- FY25 capex: Guided at INR370-380 crores, with satisfactory progress on all infrastructure and capacity expansion initiatives.
- Bhiwadi plant: The new AC plant is almost commissioned; trial production is ongoing, awaiting BIS certification. Final production expected by end of this month or next month.
- Current capacity: Approximately 3.5 lakh CBUs per month. Capacity expansion plans for next year will be shared in Q4.
- QIP utilization: Funds deployed partly for working capital (intensity has increased), partly for new growth opportunities and capex, and partly for creating infrastructure for coming years as the company has run out of land and will construct new facilities.
- FY26 capex and guidance: Both will be finalized in coming months and disclosed with Q4 results once the business plan is formalized.
- State government benefits: The company hopes to receive about INR25 crores each year for the next 12 years once an application is made and accepted, which it intends to do next year.
Financial Outlook & Margin Profile
- Raised FY25 guidance: PG Electroplast standalone operating revenue minimum INR4,550 crores, plus INR550 crores from JV Goodworth Electronics, for total group revenue of ~INR5,100 crores. Net profit for PG Electroplast at least INR280 crores.
- PAT margin aspiration: Management hopes a ~5% range should be possible, though it cannot guide for the future.
- JV profitability: Goodworth Electronics is expected to be profitable next year.
- Growth trajectory: The company has maintained a CAGR of about 30-35% for the last 8-9 years and sees enough opportunities to continue that kind of growth in coming years. Next year should also be a good year based on current outlook, client addition, and market share gains.
- Return ratio focus: The company is dedicated to enhancing capital efficiency by increasing asset turnover through growth of the product business, with an objective of industry-leading growth while maintaining best-in-class return ratios.
Vishal Gupta: "We have been very consistent with our narrative, with our commentary on this business, and we have been able to deliver on those numbers whatever we have been promising. We are very hopeful to continue this growth journey for another 2, or 3 years. We don't see the major challenge in this."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| FY25 group revenue | Minimum ~INR5,100 crores (PGEL INR4,550 cr + JV INR550 cr) | FY25 |
| FY25 net profit | At least INR280 crores (PG Electroplast standalone) | FY25 |
| FY25 capex | INR370-380 crores | FY25 |
| Compressor production start | Initial production within 9 months of finalizing tie-up; full ramp-up in another 3 months | 9 months post-agreement |
| Bhiwadi plant production | Final production start | End of current month or next month |
| EV assembly business start | Production commencement | Next 2-4 months |
| JV Goodworth profitability | Profitable | Next year (FY26) |
| FY26 guidance and capex | Disclosure of business plan, segment guidance, capex | Q4 FY25 results |
| State government benefits application | ~INR25 crores/year for 12 years | Application next year |
Key Metrics
| Metric | Q3 FY25 |
|---|---|
| Operating revenue | ₹967+ cr, +82% YoY |
| Product business share of revenue | 69% of operating revenues |
| EBITDA | ₹92 cr, +97% YoY |
| Net profit | ₹40.14 cr, +110% YoY |
| 9M FY25 operating revenue | ₹2,960 cr, +77% YoY |
| 9M FY25 EBITDA | ₹287 cr, +85.5% YoY |
| 9M FY25 net profit | ₹144 cr, +121% YoY |
| FY25 operating revenue guidance | ₹4,550 cr minimum for PG Electroplast, plus ₹550 cr from JV Goodworth Electronics, total group revenue ~₹5,100 cr, ~86% growth vs FY24 |
| FY25 net profit guidance | ₹280 cr minimum, ~105% increase over FY24 net profit of ₹137 cr |
| FY25 capex guidance | ₹370–380 cr |
| Product segment FY25 guidance | ₹3,300 cr, +98% from ₹1,668 cr in FY24 |
| Room AC revenue growth (Q3) | 180% YoY |
| Washing machine revenue growth (Q3) | ~65% YoY |
| 9M product division revenue | ₹2,017 cr, +126% YoY |
| 9M room AC revenue | ₹1,636 cr, +154% YoY |
| 9M washing machine revenue growth | 49% YoY |
| 9M coolers revenue growth | 127% YoY |
| Net cash position (9M end) | ₹793 cr |
| Inventory (9M end) | ₹1,025+ cr, elevated in preparation for AC season |
| JV Goodworth Electronics 9M revenue | ₹436 cr |
| JV Goodworth Electronics expected PAT margin | 1–2% |
| Plastic and other components revenue (Q3) | ₹233 cr |
| Electronics segment revenue (Q3) | ₹68.5 cr |
| AC capacity | ~3.5 lakh units per month across both plants |
| Market share: ACs manufactured by PG per 10 sold in India | ~1.2 ACs |
| Market share: washing machines manufactured by PG per 10 sold in India | ~1 washing machine |
| Top 5 client concentration (AC and washing machine) | 50–60% of revenue |
| AC margin | ~7–7.5% |
| Component margin | ~8–8.5% |
| Electronics margin | 2–4% depending on product |
| PLI expected in FY26 (for prior year) | ₹37.5 cr to be booked |
| PLI expected in FY27 | ₹52 cr |
| PLI expected in FY28 | ₹60 cr |
| State government benefits expected annually | ~₹25 cr each year for next 12 years once application accepted |
| State incentive accrual per quarter | ₹1.5 cr |
| EV assembly business expected sales (second year) | ~₹500 cr with current client |
| Q4 FY25 overall sales growth guidance | At least 48% YoY |
| Full-year AC growth expectation | Almost more than 100% |
| Industry RAC growth estimate | ~30–35% |
| Company RAC 9M growth | ~150% |
| 5-star AC price increase under new BSL ratings | ₹700–800 (initial estimate) |
| 3-star AC price change under new BSL ratings | No major increase |