Key Takeaways
- Product business tripled, with more to come: FY22 product revenue grew 146%, and management is budgeting another 120% growth in FY23, driven by AC and washing machine ODM scale-up.
- PLI plant commissioned in record time: The Supa, Maharashtra AC facility was built in 165 days, the first Greenfield plant under the PLI scheme, and is already expanding capacity.
- Margins held despite one-off costs: Operating margin improved 85 bps QoQ in Q4 even with ESOP and warranty charges, though FY23 reported margin improvement will be muted by a higher TV mix.
- Balance sheet stretched by growth: Net debt crossed equity as the new plant was commissioned late in the year and inventory was built for AC season; management targets a debt-to-equity ratio below one next year.
- What to watch next quarter: Whether the August AC ramp-up with new large customers materializes, the pace of inventory and receivable normalization, and any update on the Greater Noida heat exchanger decision.
Product Business: The Growth Engine
- AC ODM launched at scale: The business added 7 customers in its first year and started billing all of them largely in Q4 from the new Supa plant, which management says is the largest capacity for manufacturing air conditioners in Western India.
- Washing machine capacity doubled: Early in the year, capacity was doubled and fully automatic platforms were launched; the business now services close to 16-17 brands and continues to add significant names.
- FY23 capacity expansion underway: Washing machine capacity is almost doubling again; RAC capacity is expanding to 200,000 indoor units and 100,000 outdoor units monthly.
- Backward integration starting: A manufacturing facility for RAC controllers is being added at the Supa unit, reducing import dependence over time.
- Ramp-up timing: Washing machine ramp-up begins from July; AC production ramp-up with one or two big new customers is hoped for by August.
- Seasonality improving: Revenue mix is expected to shift from 30:70 to 40:60 (first half vs second half of calendar year) over the next couple of years as the business diversifies.
Vishal Gupta: "As of now we don't see much challenges in meeting our fixed or variable cost, going forward when the business will stabilize, but we don't see another two years we will be in a very rapid growth phase."
PLI Scheme: Investment & Payback
- Fourth-largest AC PLI commitment: The company committed the fourth largest investment under the AC components PLI scheme through its 100% subsidiary PG Technoplast Private Limited.
- Supa plant built in 165 days: The Greenfield RAC component and assembly unit in Maharashtra was the first to begin operations under the PLI scheme, with a large part of the announced CAPEX already underway.
- Sales targets seen as achievable: Management ran extensive internal simulations and believes the PLI sales targets are achievable, though the fourth and fifth year may be a challenge. A PLI caveat allows non-AC component sales to count toward the target if needed.
- Total benefit: On a total investment of ₹300 crores, the company expects to receive ₹200 crores from the Government of India.
Pramod Gupta: "I will tell you, when we have planned to do this investment we have done a lot of simulation internally. And the kind of projections which we have made for ourselves, we see that it is not going to be very easy also, but it's not going to be very difficult if the numbers are achievable."
Margins & Cost Structure
- Q4 margin improved despite mix headwind: Operating margin rose 85 bps QoQ even though TV business contribution increased to 9% of sales from 4% in Q3.
- One-off costs absorbed: FY22 carried fundraising costs, product testing and validation costs in the first three quarters, plus a non-cash ESOP charge of ₹2.07 crores and ₹50 lakhs for warranties in Q4.
- Commodity pass-through mechanics: In OEM business, pass-through happens monthly; in ODM, there is always a lag whether prices rise or fall. Pricing contracts use a lag two-month average and are reset every 2-3 months.
- Commodity outlook easing: Management is already seeing commodity prices ease and hopes not to see the steep rises of the past 1.5-2 years, which would make pass-through easier.
- FY23 margin guidance muted: Margins are expected to improve across all businesses due to scale and operating leverage, but overall reported margin will show only a small improvement because of much higher growth expected in the lower-margin TV assembly business.
- Normalized product margins: Management disclosed that normalized operating margins are 7-8% for the product business and 6-7% for plastic molding, though it declined to share division-wise splits for the quarter.
Balance Sheet & Working Capital
- Net debt crossed equity: The Supa plant was commissioned only in Q4, so all debt hit the balance sheet while the plant contributed for just one quarter; higher AC inventory added to the strain.
- Receivable days optically high: Q4 billing is heavily concentrated in the last few months, with Q4 turnover of ~₹500 crores against ~₹600 crores for the first three quarters combined.
- Inventory built for AC season: It was the first year in AC ODM, and management carried extra inventory to avoid missing deliveries, partly because Chinese New Year causes shipment delays from China.
- Inventory days to improve structurally: As the domestic component ecosystem develops under PLI, import dependence on China reduces, lowering the need to hold high inventory of imported items. Also, Q4 billing concentration will ease next year.
- Working capital running down: Working capital loan and inventory are already declining as the season progresses and imported AC raw material gets utilized.
- Long-term working capital target: Management expects the cycle to settle at 45 to 50 days, with the final number depending on customer mix as the product business grows.
Pramod Gupta: "We are short on capital as a company and we have a debt so we are actually always very conscious of keeping the inventory at our end, especially given the kind of high raw material prices right now."
CAPEX & Funding Plan
- FY23 CAPEX of ₹130-140 crores: Majorly funded by debt and internal accruals this year; a small additional debt will be taken, with the rest managed through internal accruals. No capital raise is planned in the immediate next three to four months, though a shareholder enabling resolution is being taken.
- Greater Noida (PGTL) expansion: Significant CAPEX is planned to develop a component ecosystem: cross flow fan and plastic molding are already being done; management is internally contemplating starting heat exchanger production and possibly servicing some IDU solutions, with a decision expected very soon.
- Debt self-sufficiency from FY24: Management does not see any requirement to take further debt to meet investment requirements from FY24 onwards, expecting enough cash flow from next year.
- Fixed asset turnover target: Internal target of 4 to 5 over the next couple of years; management says they must reach this to get desired return ratios and are working very hard toward it.
Pramod Gupta: "4 to 5 is the internal target that we have for the next couple of years. We have to reach there to get our desired return ratios, and we are working very hard towards it."
Competitive Position & Market Structure
- Washing machine outsourcing position: Management believes the company is probably number two on a monthly run-rate basis, though it cannot confirm because a couple of unlisted players' numbers are not available.
- AC outsourcing share unclear: The same data gap exists for AC; formal market share numbers are not available.
- Supa plant location advantage: The Ahmednagar district site is equidistant from North, South and East India, enabling pan-India customer service from a single location, which management says is driving client interest.
- Growth sustainability focus: Management acknowledges the challenge is to make growth sustainable and is conducting significant internal discussions on how to achieve this.
Vishal Gupta: "the challenges is that we have to make the growth sustainable and that we do understand internally. And the management is doing lot of discussions on that to how to grow in a sustainable manner."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Product business growth | 120% growth over FY22 | FY23 |
| Washing machine capacity | Almost double current capacity | FY23 |
| RAC capacity | Expand to 200,000 IDU and 100,000 ODU monthly | FY23 |
| AC production ramp-up | Ramp up with one or two big new customers | By August |
| Washing machine ramp-up | Ramp up from July onwards | July onwards |
| Debt-to-equity ratio | Target below one | FY23 |
| CAPEX funding self-sufficiency | No further debt needed for investments | From FY24 |
| Fixed asset turnover | Reach 4 to 5 | Next couple of years |
| Working capital cycle | Settle at 45 to 50 days | Long-term |
| Revenue seasonality | Improve first-half share from 30% to 40% | Next couple of years |
| Inventory dependence on China | Continuously reduce | Next 3-4 years |
Key Metrics
| Metric | Q4 FY22 |
|---|---|
| Revenue | ₹500 cr (approx.), Q4 FY22 turnover |
| Product business revenue | ₹259 cr (AC ₹200 cr, washing machine ₹50 cr, coolers ₹9 cr) |
| Product business growth (FY22) | 146% for FY22 |
| Washing machine business growth (FY22) | 119% for FY22 |
| AC products business growth (FY22) | 185% for FY22 |
| Operating margin improvement | 85 bps QoQ improvement in Q4 |
| TV business revenue share | 9% of sales in Q4, up from 4% in Q3 |
| ESOP charge (non-cash) | ₹2.07 cr in Q4 |
| Warranty charge | ₹50 lakh in Q4 |
| Net debt to equity | >1x, around ₹350 cr |
| Product business normalized operating margin | 7-8% |
| Plastic molding business normalized operating margin | 6-7% |
| FY23 product business growth guidance | 120% budgeted for FY23 |
| FY23 planned CAPEX | ₹130-140 cr |
| PLI scheme total investment | ₹320 cr |