Key Takeaways
- Earnings inflect sharply: Consolidated EBITDA rose more than 5x YoY, with standalone margins hitting 26.1% (up 950 bps YoY), driven by procurement savings, mix shift, and operating leverage.
- The margin reset is structural, not cyclical: Management systematically rebuilt the electronics cost base over the past year, cutting procurement costs 4-5%, halving inventory, and reducing lead times from months to weeks. The 20-22% sustainable range is now the floor.
- Aluminum Die Casting is the swing factor: The segment is at breakeven after losing 35-40% of auto volume to China. A pivot to non-auto industrials is underway, with 50+ RFQs submitted, but the recovery path is multi-year.
- Solar and new meters are call options, not contributors yet: The single-phase inverter booked ~1,000 orders at an exhibition, but meaningful revenue is 2-4 quarters out. MID meter certifications are done, but sales have not yet picked up.
- What to watch next quarter: Whether the 15-17% H2 topline run rate materializes despite European industrial weakness, whether Lumel Alucast stays at breakeven or slips back on legacy contract runoff, and whether MID meter and inverter orders convert to shipped revenue.
Margin Transformation: How 26.1% Happened
- Procurement overhaul: Raw material costs were reduced by 4-5% through improved sourcing, contributing directly to the gross margin expansion across both India and Poland operations.
- Manufacturing reorganisation: Labor costs were reduced without adding headcount for growth, while inventory was cut from 6-7 months to 2-3 months, releasing working capital and reducing carrying costs.
- Lead time compression: Product lead times fell from 2-3 months to 2-3 weeks, improving on-time delivery and reducing quality-related costs quarter on quarter.
- Mix shift toward higher-margin products: Pronotech exports to Spain and other high-margin lines grew share, while lower-margin EMS and solar sales were deliberately reduced during H1 to optimise for profitability.
- Sustainable range established: Management pegs the sustainable EBITDA range at 20-22% for the electronics business; performance above that depends on product mix and market conditions. The 24% India and 19% Lumel margins are not one-offs.
Musalekar: "So, it is not just one or two reasons. We have been firing in all the barrels to get this really significant EBITDA level of 26.1% after first half of the year."
Lumel Alucast: The Turnaround That Defines FY27
- The damage: The European auto downturn and EV business shifting to China left 35-40% of capacity unused. Several large loss-making legacy contracts were concluded during the quarter, enabling portfolio streamlining but temporarily weighing on revenue.
- The pivot: Management is backfilling capacity with non-automotive customers: ABB, Siemens, Endress+Hauser. Over 50 RFQs were submitted in the last quarter, and the trajectory of pipeline quality and customer engagement is described as distinctly positive.
- The recovery path: From 0% EBITDA currently (versus historical 18-20%), management targets 0-2% this year, 10-11% next year, and a return to 18-20% thereafter, contingent on successfully filling the unused capacity.
- Near-term drag: The planned phase-out of loss-making contracts will temporarily weigh on revenues in Q3-Q4, and some losses may still reflect in those quarters.
- Revenue decline in zloty terms: Lumel Alucast revenue fell 10.7% YoY in Polish Zloty, a direct result of the strategic decision to exit legacy contracts. Adjusted EBITDA swung from a loss of ₹12.8 crore to a positive ₹7.8 crore in H1.
Goliya: "We want to be the last person in the line. As I said, Aluminum Die Casting, so much bad has happened but we still are there. We are bouncing back. That is the character of the company."
European Exposure: Headwinds and Resilience
- Lumel SA recovery: The Polish subsidiary showed solid sequential recovery with 33.6% QoQ growth in Q2 and 10.4% YoY growth, with EBITDA margins at 24.4%. Management is confident of delivering similar H2 numbers as H1.
- Macro pressure in Europe: European markets continue to experience sustained pressure in electronic automation and power-related segments as government priorities shifted toward defence spending, muting public investment in infrastructure upgrades and automation.
- Distributed customer base as a buffer: Unlike the concentrated Aluminium Die Casting business, the electrical business across Lumel and Rishabh is very well spread out, limiting the impact of any single customer or geography.
Goliya: "Unlike the Aluminum business, where it is focused with 6-7 or maybe 7-8 major customers, the electrical business, both in Lumel and in Rishabh is very well spread out."
New Product Pipeline: Certifications Done, Revenue Awaited
- MID meters for Europe: All certifications obtained after an extensive and costly process (MID approval alone cost ~₹1.5 crores). Sales have started but have not yet picked up.
- US energy meters: Certifications obtained; sales started and expected to pick up. The certification process proved more challenging than the product development itself.
- Single-phase solar inverter: Received exceptional response at a major industry exhibition, booking close to 1,000 orders at the stall. However, meaningful revenue is 2-4 quarters out, and the product range above 20kW is still under development.
- Solar headwinds: The inverter business faced severe pressure from Chinese competitors flooding the Indian market with CKD/SKD/PCB kits despite Make In India rules. The company had to redevelop technology with in-house aluminium casing design for better heat dissipation and cost.
- Medium voltage and China launches: Medium voltage segment products to be launched next financial year; China operations are on the verge of launching 5 new products.
- R&D investment: A new R&D centre has been established within IIT Bombay to leverage professors' expertise. Product development follows four buckets: upgrading existing products, expanding product baskets, filling gaps, and addressing customer-specific needs.
Capacity, Brand, and Organisation Building
- Capacity doubling underway: Construction of two new buildings (5 and 7 storeys) in Nashik is 50% complete, expected to finish by March-April 2026, and will effectively double production capacity. Most of the remaining ₹60 crores in capex will be utilised by the end of this financial year.
- Capex timeline questioned: An analyst noted the IPO was in September 2023 and pushed back on management's denial of delays. Management attributed the timeline to construction norms and MIDC approvals but did not directly address the two-year gap between IPO and construction start.
- House of brands strategy: A year-long brand exercise is underway to project the group as "Rishabh group of companies" while preserving individual brand identities (Lumel, Sifam/Tinsley, Microsys, Rishabh). R&D, sales, production, and purchasing will be optimised across the group without duplication.
- Management team strengthening: Gaps in the management team are being filled with external experts; good hiring was reported in prior quarters.
Musalekar: "Lumel has got 72 years of legacy and no other brand can replace it. And it is, we sell Lumel products for 20% higher than brands like Schneider in Poland. So, it will be foolish to go away with that."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Full-year EBITDA | ₹100 crores consolidated EBITDA | FY26 |
| Electronics topline growth | 12-15% growth in EEI business | By end of FY26 |
| H2 topline run rate | ~15% growth (conservative, given external conditions) | H2 FY26 |
| Lumel Alucast EBITDA | Small positive (0-2%) | FY26 |
| Lumel Alucast EBITDA | 10-11% | FY27 |
| Lumel Alucast EBITDA | Return to 18-20% | Beyond FY27, contingent on filling capacity |
| Capacity expansion | Two new buildings completed, doubling production capacity | March-April 2026 |
| Solar inverter revenue | Substantial growth to show | 2-4 quarters |
| Medium voltage products | New products launched | Next financial year (FY27) |
| China operations | 5 new products launched | Imminent |
| Long-term aspiration | 20-22% CAGR topline, 25% CAGR bottomline | Multi-year (this year exceptional, not repeatable) |
Key Metrics
| Metric | Q2 FY26 |
|---|---|
| Consolidated revenue | ₹196.3 cr, +7.7% YoY |
| Consolidated revenue H1 FY26 | ₹386.7 cr, +9.9% YoY |
| Consolidated EBITDA | ₹33.4 cr, +220% YoY; margin at 17%, up 1,129 bps YoY |
| Consolidated EBITDA H1 FY26 | ₹61.8 cr, +244% YoY; margin at 16% vs 5.1% YoY |
| Consolidated PAT | ₹22.1 cr, +475% YoY |
| Consolidated PAT H1 FY26 | ₹41.7 cr, +492% YoY |
| Full-year EBITDA guidance | ₹100 cr, reaffirmed |
| Standalone revenue | ₹66 cr, +12.1% YoY |
| Standalone EBITDA margin | 26.1%, up 1,075 bps YoY; improved from 11.5% in Q1 FY25 |
| Standalone PAT | ₹12.6 cr, +85.4% YoY |
| Lumel SA revenue | ₹61.5 cr, +10.4% YoY; +33.6% QoQ |
| Lumel SA EBITDA margin | 24.4%, up 421 bps YoY |
| Lumel Alucast revenue | ₹59 cr, +1% YoY; -10.7% in Polish Zloty |
| Lumel Alucast adjusted EBITDA H1 FY26 | ₹7.8 cr, vs loss of ₹12.8 cr in H1 FY25; margin at 5.8% |
| EEI segment revenue growth | 10.8% YoY; adjusted EBITDA margin exceeding 25% |
| Net cash and cash equivalents | ₹121 cr, as of 30 Sep 2025 |
| Cash flow from operations H1 FY26 | ₹62.6 cr, as of 30 Sep 2025 |
| Solar inverter orders booked at exhibition | ~1,000 orders |