Key Takeaways
- Margin hit from a timing gap, not structural damage: EBITDA margin fell 255 bps QoQ to 14.5% because steel and supplier price increases landed before customer price negotiations concluded, a gap management expects to largely close in the December quarter.
- Price recovery is underway but incomplete: Customer negotiations are ongoing, some purchase order amendments are still awaited, and a large part of the recovery is expected to materialize in the December quarter, with some arrears effective from July or earlier.
- A marquee driveline win signals EV traction: SKF won a hybrid transmission bearing program from a major Indian OEM, including ceramic bearings and conductive brushes, with start of production expected in Q2 2028 and ~100% share on the bearing position.
- Capacity expansion is arriving now: One new line starts in the December quarter, another in March 2027, and more in the next financial year, part of a INR 500 crores-plus capex plan with ~INR 200 crores spent this year.
- What to watch next quarter: Whether the December quarter delivers the promised margin recovery to above 15%, how much of the price arrears actually get billed, and any further customer wins in the hybrid/EV driveline space.
Margin Bridge: The Timing Gap
- Steel and supplier costs hit first: Cost inflation from steel prices and value-addition price increases given to vendors became effective from April, with the full impact landing in the July-September quarter, compressing gross margin by almost 5% excluding other income.
- Price pass-through lagged: Customer price negotiations were not concluded last quarter, and even where agreements were reached, purchase order amendments had not been received, so SKF could not bill the higher prices.
- Recovery mechanics: Amendments are expected in the October-December quarter, some covering arrears effective from July or earlier, which should correct the timing gap and pull margins back up.
- Other income provided a cushion: Elevated other income from forex gains, capital asset sales, contractual manufacturing with the industrial company, and rental income helped support EBITDA on a YoY basis.
- Variable costs rose with volume: Other expenses increased partly because variable costs (stores and spares, power and fuel, royalty and trademark fees) rose alongside ~20% volume growth; demerger-related expenses are now largely over.
Holani: "Primarily, it's a timing gap between the 2 quarters in terms of the cost impact coming and the pricing part coming in income... This will get covered in December quarter, and we should see the impact in the next quarter."
Price Negotiations & Recovery
- Negotiations still in flight: Discussions are continuing, with a large part expected to materialize in the December quarter; some customers have received increases effective April, some July, and some already got increases effective January, but not all are concluded.
- Management declined to quantify the split: When asked what percentage of OE customers have agreed, what percentage are still negotiating, and what percentage will not agree, management said everything has not concluded and deferred the answer to the next quarter call.
- Recovery ambition is near-complete: Management expects to recover "largely the entire part" of the margin loss from steel and supplier value-addition, with only a "slight marginal gap" from the current quarter to the next, and a large recovery in the December quarter.
- No specific recoup percentage given: When asked whether 80%, 90%, or 100% of the contribution margin loss can be recouped, management reiterated "largely the entire part" without providing a numerical breakdown.
Holani: "We expect largely to recover the entire part of it, maybe there could be a slight marginal gap from current quarter to next quarter. But largely, we expect to recover in the December quarter."
Driveline Win & EV Product Pipeline
- Hybrid transmission breakthrough: SKF won a driveline business from a major Indian OEM introducing hybrid transmission technology for the first time, chosen as the partner to develop bearings for the transmission applications.
- Technology scope: The win includes ceramic bearings and conductive bush, both high-technology, high-precision, high-speed bearing solutions providing insulation and conductor solutions for electric motors.
- Competitive position: SKF has about 100% business on the bearing position and roughly about 50% on the new technology solutions in this win; start of production is expected in Q2 2028.
- Near-shore advantage: The win was attributed to SKF's ability to provide technical solutions from near shore, partnering with the customer for development in India, and portfolio expansion into new products introduced globally and in India.
- EV content per vehicle: Management sees a marginal increase in value per EV vehicle versus ICE, driven by high-performance requirements (ceramic bearings, conductive brushes) that offset the reduction in bearing positions.
- Mainstream timeline: High-technology new products like ceramic bearings and conductive brushes are expected to enter the mainstream market around 2028; ceramic bearings are currently niche due to supply chain constraints for ceramics, with volumes expected to pick up in the next 3 to 4 years.
Kumar: "We see a marginal increase in the value per EV vehicle compared to the other ICE... Absolutely. No reduction in value, but rather it will be marginal increase."
Regulatory Cycle: CAFE III Now, BS7 Later
- CAFE III is the nearer deadline: The passenger vehicle market is currently dealing with CAFE III norms, which are closer to implementation than BS7; various programs on low-efficiency, high-performance products are already validated and under implementation.
- BS7 is a commercial-vehicle story for now: BS7 discussions are more relevant and at the development stage with commercial vehicle customers, with high-efficiency fuel-efficient product offerings ongoing.
- BS7 revenue timeline: Nominations and other business acceleration are expected probably by the end of Q2 next year (FY28), not earlier.
Kumar: "Currently, the passenger vehicle market is dealing with the CAFE III norms, which will be a bit more nearer launch implementation, I would say, rather than the BS-7... BS7 comes after that in our view as we see in the market."
Capacity, Capex & the Industrial Transition
- Capex plan: Overall capex during the current year is close to INR 200 crores, part of a larger INR 500 crores-plus plan; new lines are coming into production and commissioning from the December quarter onward, adding capacity.
- Capacity timeline: One new line starts in the December quarter (Q3 FY27), another is expected to be commissioned in March 2027, a third new channel in July 2027, followed by more in the next financial year.
- Traded goods to shrink: Imports are very few, and trading from SKF Industrials post-demerger is expected to reduce to minimal or negligible levels over the next couple of years, with new channel capacity replacing trading volume.
- Industrial space transition: Once the industrial business moves out of shared premises, the space will be used for SKF India's own business, which management expects to be much more productive commercially than the current rental income.
- Royalty and trademark fees unchanged: These remain the same as a percentage post the brand launch and the parent-company split into separate automotive and industrial entities.
- Component-only strategy reaffirmed: Management stated SKF will remain only a component supplier and will not play the system game or offer system-level sub-assemblies; the strategy is to do business for customer outcomes through component sales.
Kumar: "Now as a strategy, we are going to be only component suppliers. We will not play the system game at all. So that is the current management thinking on how we go-to-market with our product lines."
Aftermarket & Other Income
- Aftermarket volume stabilized: The value-added aftermarket business saw ~7% YoY degrowth both this quarter and last quarter, with a QoQ drop of less than 2%; margins are stabilizing but not moving upward, and the market remains dynamic and scattered with hundreds of customers; work remains to be done.
- Other income composition: A significant part comes from services and space given to SKF Industrial (rental), plus hosting global-role employees (finance shared services, Southeast Asia) invoiced at cost-plus-markup per transfer pricing rules; treasury income is not very significant.
- Exports robust: Q2 export growth was robust; management expects exports to remain around 10% of the mix, though quarter-on-quarter variations can occur due to one-off transactions or baseline shifts.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| EBITDA margin recovery | Return to above 15%, reverting to previously given guidance | Within FY27, impact visible in subsequent two quarters |
| Price pass-through billing | Large part of customer price increases to materialize; some arrears effective from July or earlier | December quarter (Q3 FY27) |
| Capacity addition | One new line commissioned | December quarter (Q3 FY27), with another in March 2027 |
| Capacity addition | Second new channel commissioned | March 2027, and one channel capacity enhancement also going live in March 2027 |
| Capacity addition | Third new channel commissioned | July 2027 |
| Driveline win start of production | Hybrid transmission bearing program for major Indian OEM | Q2 2028 |
| BS7 nominations and business acceleration | Nominations and acceleration expected for commercial vehicle customers | Probably end of quarter two next year, not earlier |
| Revenue growth | 15% or upward of 15%, aided by price increases and new channel capacity replacing trading volume | Next year |
| Traded goods reduction | Trading from SKF Industrials to reduce to minimal or negligible level | Over the next couple of years |
| Ceramic bearing volumes | Volumes to pick up as supply chain constraints ease | Next 3-4 years |
| EV high-technology products | Ceramic bearings, conductive brushes to enter mainstream market | Around 2028 |
Key Metrics
| Metric | Q2 FY27 |
|---|---|
| Revenue (product sales, excl. other operating income) | 16% YoY growth, 2% QoQ growth |
| EBITDA margin | 14.5%, down 255 bps QoQ; up 155 bps YoY |
| Profit before tax (excl. exceptional items) | Up 181 bps YoY, down 252 bps QoQ |
| Gross margin impact (excl. other income) | Impacted by almost 5% vs revenue from operations |
| Net working capital | 18.8% of sales, 2.9% lower than Q2 FY26 |
| Sales mix: OE | 66% of sales |
| Sales mix: Vehicle aftermarket | 19% of sales |
| Sales mix: Exports | 10% of sales |
| Sales mix: Business with SKF Industrial | ~5% of sales |
| Aftermarket revenue growth | ~7% YoY decline, less than 2% QoQ decline |
| Other income | ~₹29 cr, includes treasury, rental, forex, asset sales |
| Cash in hand | ~₹100 cr at quarter-end |
| Capex incurred during quarter | ₹140 cr announced; full-year FY27 capex expected ~₹200 cr, part of larger ₹500 cr-plus plan |
| Volume growth (driving other variable expenses) | ~20% YoY |