Key Takeaways
- Volumes held up despite headwinds: H1 sales volume fell only 3% YoY, with domestic demand described as good and inter-segment transfers actually growing, cushioning a sharp drop in exports.
- Spreads compressed by raw material and freight spikes: Styrene monomer prices nearly doubled to $1,600–$1,650/ton, and ocean freight rates swung wildly, shrinking GPPS spreads to $200–$250/ton and HIPS spreads to $300–$350/ton after costs.
- Import surge was temporary and has reversed: A brief government duty exemption in April–July 2025 triggered a spike in cheaper ASEAN and Chinese imports, intensifying domestic price pressure, but imports fell below last year’s levels by August after the exemption was withdrawn.
- Specialty and compounding mix improved: Specialty share rose to ~40% on expanded volumes, the Xmold subsidiary nearly doubled performance YoY, and ABS compounding acceptability has been good, supporting a richer product mix.
- What to watch next quarter: Whether styrene prices and freight rates ease post-US midterm elections as management hopes, enabling a recovery in spreads and a restart of exports.
Volume & Demand Dynamics
- Domestic demand was the anchor: After a subdued Q1 in the non-OEM segment, both OEM and non-OEM demand returned in Q2, aided by the festival season; October demand has also been good so far.
- Exports were the drag: Export volumes suffered from limited styrene monomer availability, elevated ocean freight rates, and a time lag between order and shipment that made pricing unworkable when freight costs could jump $2,000 in the interim.
- Inter-segment transfers masked the true volume picture: If compounding and XPS volumes transferred internally are added to net sales, total volumes actually exceeded last year’s, even though net sales to market were down 2.8%.
- India’s appliance cycle provides a structural floor: Major AC and appliance companies are setting up new units under PLI schemes, and management expects polystyrene demand to be supported over the next 3 to 4 years as India becomes an export hub for appliances.
- EPS demand is steady but not accelerating: Total India EPS demand for the current year is estimated at 165,000–170,000 tons, with no newer applications expected to drive incremental growth over the next 2–3 years.
Nayyar: "The ocean freight rates have shot up so high. The order taken three weeks back and by the time we ship, the freight rates have increased up by $2,000 in the interim. So those issues still continue unless we export on an FOB basis and the freight cost to the buyers."
Spreads & Raw Material Pressure
- Styrene monomer prices nearly doubled: Prices rose from a $900–$1,000 range to $1,600–$1,650, driven by the absence of material from West Asia, a major energy and feedstock supply source disrupted by geopolitical conflict.
- Spreads narrowed materially: The combination of higher styrene costs and elevated freight rates, both containerized and liquid bulk, compressed GPPS/HIPS spreads to $200–$250/ton after freight and costs.
- Pass-through mechanics work with a lag: Raw material price increases are passed through to selling prices, but a time lag exists, and the SAP moving-average inventory valuation means market-versus-import price mismatches are absorbed as part of normal volatility rather than booked as discrete inventory losses.
- Pentane availability improved: Pentane, which constitutes a small share of EPS raw material, is now available locally, though its prices have also risen; styrene monomer remains the dominant cost driver at 92% of EPS raw material.
Nayyar: "I wouldn't call that any inventory loss or something, but then that is all part of the game, because when the volatility is there, these things are always happening."
Import Competition & Policy Risk
- A policy shock opened the door: The Government of India announced a duty exemption for all polymers in the first week of April 2025, tempting traders and end-users to source cheaper PS and ABS from ASEAN countries and China, which intensified competitive pressure on domestic selling prices during the first two months of Q2.
- The shock was short-lived: The duty exemption was withdrawn in July 2025, and August imports fell below last year’s levels, partly due to possible non-availability of material linked to Gulf war disruptions.
- Full-year import volumes may still be similar: ABS imports for the full year are expected to be almost similar to last year; polystyrene imports may be a little lower, but the total could end up comparable.
- Competition’s capacity addition remains absent: A competitor’s ABS capacity addition is still in the pipeline and not yet operational, with no known timeline, leaving Supreme’s expansion plans unchallenged for now.
Product Mix & Specialty Shift
- Specialty share rose to ~40%: The specialty mix increased on expanded volumes, improving the overall product profile and margin resilience.
- Xmold turnaround gained traction: Streamlined operations, credit discipline, and product profile changes drove a near-doubling of performance both QoQ and YoY, with better margins.
- ABS compounding acceptance is building: Acceptability of compounded ABS material has been good so far, and the company has entered the auto components segment, receiving initial acceptance from the two-wheeler electric mobility segment.
- XPS insulation board is a near-term catalyst: Commercial production is expected to start in Q1 FY28, with the full 150,000 cubic meters of capacity expected to be absorbed in the market over 24–30 months; current inter-segment XPS sales are low due to monsoon lean months.
Capacity Expansion & Capital Allocation
- Compounding capacity is scaling: 80,000 tons of compounding capacity is to be implemented by sometime in Q3 FY28, with full utilization expected in FY29-30.
- Second ABS line is the big bet: A second ABS line should be ready by Q3 FY29, and ABS remains the most capital-intensive part of the company’s capital allocation plans.
- No inorganic plans: Management confirmed there are no inorganic growth plans at the moment, keeping the focus on organic capacity build-out.
- Interim dividend declared: The Board approved an interim dividend of 125%, or ₹2.5 per equity share.
Geopolitical Overhang & the Recovery Bet
- Everything hinges on the US midterm elections: Management’s base case is that if war clouds settle post-elections, raw material availability eases, and freight rates normalize, then the operating environment improves from December onwards; if not, raw material constraints continue and the outlook is very difficult to predict.
- Exports can restart quickly when conditions allow: The company continues to engage with customers in all markets, and restarting exports is not seen as difficult once raw material supplies and freight markets return to normal.
- European plant closures are not a confirmed opportunity: An analyst asked whether European plant closures due to higher energy costs could structurally open the European EPS market; management said they have not heard of any closures, only some reorganization and reduced operating rates, and the question was not directly addressed.
Nayyar: "I don't have a crystal ball with me right now. The changing global environment and current geopolitical conditions, are very difficult to project."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Volume growth | Full-year volumes expected to be better than last year, despite exports being down so far | FY27 (conditional on everything being normal post-US midterm elections) |
| Compounding capacity | 80,000 tons to be implemented | Sometime in Q3 FY28 |
| Second ABS line | Ready for operation | Q3 FY29 |
| Full compounding utilization | Capacity fully absorbed | FY29-30 |
| XPS commercial production | Start of commercial output | Q1 FY28 |
| XPS capacity absorption | Full 150,000 cubic meters absorbed in the market | 24–30 months from start |
| Styrene price relief | Improvement possible if war clouds settle | From December onwards |
Key Metrics
| Metric | Q2 FY27 |
|---|---|
| Operating income (standalone) | ₹1,957 cr, vs ₹1,100 cr in Q2 FY26 |
| EBITDA | ₹160 cr, margin 8.12% |
| Profit after tax | ₹95 cr, almost doubled YoY |
| H1 FY27 operating income | ₹3,649 cr |
| H1 FY27 EBITDA | ₹508 cr |
| H1 FY27 PAT | ₹331 cr, PAT margin 9.08% |
| Total sales volume | 95,242 MT, up 24% YoY and 35% QoQ |
| H1 FY27 sales volume | 1,66,085 MT, down 3% YoY |
| Trading sales mix | ~22% of Q2 sales |
| Inter-segment transfer volume (H1 FY27) | 11,700 MT, vs 4,300 MT in H1 FY26 |
| Net sales volume to market (H1 FY27) | Down 2.8% YoY |
| Investable surplus | ₹886 cr as of September 2026, company debt-free |
| Interim dividend | ₹2.5 per share (125%) |
| ABS capacity utilization | 85% of truncated capacity (65% of rated capacity) |
| GPPS/HIPS spreads | $200–$250/ton for GPPS, $300–$350/ton for HIPS, after freight and other costs |
| Landed styrene monomer price | Crossed $1,600/ton, up from $900–$1,000/ton a year ago |
| Specialty mix | ~40% of overall volumes, up from 30–35% earlier |
| EPS total demand estimate (India, FY27) | 1,65,000–1,70,000 tons |
| Polystyrene market share (India) | ~60% |
| OEM vs non-OEM volume split | ~50-50 |