Key Takeaways
- Volume-led growth story intact: Management guided ~13% volume growth for FY26, driven by new ABS capacity and steady polystyrene demand, with ABS revenue contribution starting from Q2.
- ABS project is the central catalyst: The 70,000-tonne Phase 1 Mass ABS plant reaches mechanical completion in May 2025, with ramp-up from H2 FY26; a second identical line is targeted within roughly two years.
- Xmold acquisition opens the auto segment: The buy brings 15,000 tonnes of engineering compounds capacity and tier-2 OEM relationships, marking Supreme Petrochem's deliberate entry into automobile compounding after a history focused on appliances.
- Margins and spreads remain a black box: Management declined to guide on polystyrene spreads, ABS break-even levels, Xmold EBITDA potential, or the margin impact of the changing business mix, citing early-stage uncertainty.
- What to watch next quarter: Commissioning progress on the ABS plant, the pace of export order conversion for newly approved EPS grades in GCC and Europe, and any tariff-driven dumping pressure as reciprocal US tariffs approach.
ABS: The Core Growth Bet
- Phase 1 timeline: Mechanical completion is expected by May 2025, with revenue contribution beginning in Q2 FY26 and a ramp-up through the second half of the fiscal year.
- Scale of the opportunity: The initial line adds 70,000 tonnes of mass ABS capacity, and management hopes to commission a second 70,000-tonne line within the next two years or so, doubling the addressable base.
- New end-market exposure: Bathroom fittings and scooters are cited as newer application areas for ABS, with bathroom fittings demand linked to affordable and middle-income housing construction cycles.
- Break-even visibility is limited: Management declined to commit to a specific capacity utilization level for break-even, noting only that an analyst's assumption of 50% capacity on an EBITDA basis is "possible," while cautioning that technical collaborator estimates may differ from actual outcomes.
Rakesh Nayyar: "It's very difficult for me to answer at this stage. What is given to us by our technical collaborators, and what actually happens, really there could be a difference, it could be better than what they have given. Your assuming breakeven at 50% capacity basis is possible on EBITDA basis."
Volume Growth & End-Market Drivers
- FY26 volume guidance: Management expects around 13% volume growth, correcting an analyst's reference to a 15-16% figure from an earlier interview. Growth comes from new ABS capacity plus expansion of the current polystyrene business.
- Appliances remain the backbone: Polystyrene demand is supported by growth in air conditioners (aided by PLI incentives), refrigerators, and washing machines, with India emerging as an export hub for appliances.
- EPS capacity expansion: The second phase of EPS expansion, adding roughly 23,000-24,000 tonnes, is expected on stream by end-Q1 FY26 or during Q2 FY26.
- Domestic EPS competition rising: Competitors Styric and EPACK have expanded capacity in Gujarat, so management does not expect appreciable domestic volume increases and is pivoting to exports to absorb the new capacity.
- EPS export pivot: Grades have been approved in GCC countries and in Europe, and the company hopes to increase exports to these regions as the domestic market becomes more crowded.
Rakesh Nayyar: "But then, as far as the local demand is concerned, because there are some players up North have also expanded we don't see any appreciable increase in the volumes in the coming year because of everyone having increased their capacity. But then, we have worked on our grades with the overseas buyers. Our grades have been approved in the GCC countries and in Europe, so, we hope to increase our exports."
Xmold Acquisition & the Auto Entry
- Strategic rationale: Xmold is a Tamil Nadu-based compounding company specializing in engineering polymer compounds, located near Chennai's automotive corridor and the Siri City consumer electronics hub. It acts as a tier-2 supplier to automobile OEMs and appliance manufacturers.
- A deliberate segment shift: Supreme Petrochem has historically been in the appliances segment, not auto. The Xmold acquisition marks its entry into the automobile compounding space, bringing both technical expertise and established OEM relationships.
- Capacity and expansion path: Xmold currently has 15,000 tonnes of capacity. Management noted that enough capacity exists for now, and when growth requires more, land is available in that belt, though no timeline was given for expansion.
- Compounding synergy: With in-house ABS production coming online, Xmold's compounding expertise and client base create a vertically integrated proposition. The company plans to target new clients through its dealer distribution network and existing relationships.
- Financials undisclosed: Management declined to provide EBITDA potential at full capacity, stating that the product mix will change going forward and an estimate cannot be given at this stage.
Downstream & Value-Added Initiatives
- Haryana plant downstream products: The company is adding polystyrene sheeting and 3D panels at its Haryana facility, with management indicating EBITDA potential around 25% for the 3D board business.
- EPS recycling as market defense: The company engaged NGOs, ICPE, and hired its own team to encourage collection of post-consumer EPS waste, which was creating negative perception. Recycled EPS is used by the photo frame industry and for wall panels, helping sustain and grow the EPS market.
- Value-added grade seasonality: Value-added grades, sold to OEMs, see higher sales in Q4 due to peak OEM demand for polystyrene. On an annual basis, value-added grades represent around 40-42% of the mix.
Rakesh Nayyar: "Our initiative in the EPS recycling is born out of the fact that generally there was a negative perception about EPS because thermocol blocks after post-consumer use, were all thrown around on the roads. People did not know how to dispose it off, so, we took initiative, engaged some NGOs, involved ICPE into it, hired our own team, essentially to encourage the collection of the waste."
Cost, Margin & Balance Sheet
- Employee cost seasonality: Employee cost as a percentage of sales drops in every March quarter because the December quarter includes annual performance incentives, ex-gratia payments, and Diwali bonuses, while the September quarter carries annual appraisals and arrears.
- Freight normalization: Freight prices have returned to near pre-COVID levels, removing a headwind that had persisted through the disruption period.
- Power cost dynamics: Power costs were marginally lower due to solar power usage from October onwards, but with rising costs and higher capacity utilization, overall power cost ended similar to last year or marginally lower by 2-3%.
- Inventory build-up: March quarter inventory increased by Rs.220 crores, some of which is being used in April. Management does not foresee a major impact from falling styrene monomer prices on these inventories.
- Debt-free position: The company maintained its debt-free status with an investable surplus of Rs.872 crores as of end-March 2025. A final dividend of Rs.7.50 per share was recommended, bringing the full-year dividend to Rs.10 per share.
- Styrene price outlook: Management does not foresee any further fall in styrene prices, contingent on crude and benzene prices stabilizing.
Competitive & Trade Risk
- Tariff-driven dumping risk: If trade flows shift away from the US due to reciprocal tariffs proposed from July, global players may redirect volumes to India. Management acknowledged the risk and stated the company is prepared to compete.
- Domestic EPS competition: New capacity additions by Styric and EPACK in Gujarat have intensified the domestic competitive landscape, which is why the export pivot has become central to the EPS growth strategy.
Rakesh Nayyar: "These players are always there, we are in a global market, so we will have to compete with that."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Volume growth | Around 13% volume growth in FY26 | FY26 |
| ABS Phase 1 mechanical completion | 70,000-tonne Mass ABS plant mechanically complete | May 2025 |
| ABS revenue contribution | ABS capacity starts contributing to revenues | Q2 FY26 |
| ABS ramp-up | Capacity ramping up from H2 FY26 | H2 FY26 |
| EPS Phase 2 expansion | Incremental ~23,000-24,000 tonnes on stream | End-Q1 FY26 or Q2 FY26 |
| EPS export growth | Increase exports to GCC countries and Europe | FY26 (implied) |
| Second ABS line | Additional 70,000 tonnes commissioned | Within roughly two years |
| Haryana 3D panels EBITDA | EBITDA potential around 25% | No date (project underway) |
Key Metrics
| Metric | Q4 FY25 |
|---|---|
| Operating income (FY25) | ₹6,023 cr, up 14.6% YoY |
| EBITDA (Q4) | ₹163 cr, up over 40% QoQ, down 15.9% YoY |
| EBITDA (FY25) | ₹605 cr |
| Net profit after tax (Q4) | ₹107 cr |
| Net profit after tax (FY25) | ₹390 cr |
| Sales volume growth (Q4) | +11.7% QoQ, marginal decline of 0.75% YoY |
| Manufactured product sales growth (FY25) | +9.4% YoY, driven by strong demand |
| Trading revenue share (FY25) | 23% of total revenue on an annual basis |
| Capacity utilization (FY25) | 79% for all products combined |
| Volume growth guidance (FY26) | ~13%, with around 50–60% of incremental volume from ABS and ABS compounds |
| Value-added grades share in polystyrene | ~40% of polystyrene volumes |
| Manufacturing sales mix (FY25) | Polystyrene two-thirds, EPS one-fourth, compounds and XPS remaining 10% |
| Investable surplus | ₹872 cr as at end March 2025, debt-free |
| Total dividend for FY25 | ₹10 per equity share (face value ₹2), including final dividend of ₹7.50 |
| FY26 capex guidance | ~₹200 cr, including part of ABS second line, EPS expansion, and compounding business |