Key Takeaways
- Volume-led growth story, capex-backed: The company is running at near-100% utilization and has announced a INR650 crores capex plan to more than double ABS and polystyrene capacity over 36–48 months.
- Margins normalizing, not expanding: EBITDA margin dropped from 14% to 12.2% YoY, settling into a post-COVID normalized band. Management is focused on protecting, not guiding up, current levels.
- Import substitution is the structural tailwind: Customers prefer local suppliers for reliability, and the company is actively displacing imports with its own product, a trend management sees ample room to continue.
- Polystyrene turnaround is complete: Production hit a multi-year high after the management takeover, winning back large OEM customers who now view the company as a far more reliable supplier.
- What to watch next quarter: Whether the ~25% volume growth target for next year holds as engineering studies finalize, and if global margin pressure spills into the domestic market.
Volume & Capacity Expansion
- Full utilization today: The company is running at close to 100% capacity utilization, selling almost everything it produces. This tightness underpins the expansion thesis.
- The capex plan: INR650 crores will expand ABS capacity from 80,000 to 2,10,000 tons per annum and polystyrene from 66,000 to 1,50,000 tons per annum. The spend is primarily brownfield at existing sites, focused on capacity augmentation, cost savings, and efficiency improvements.
- Timeline and phasing: Capex will be spread over 36 to 48 months, with phasing dependent on the completion of ongoing engineering studies. Management indicated it will not be strictly front-ended or back-ended.
- Volume growth target: Total volume available next year is expected to be ~2,05,000 to 2,10,000 tons, targeting ~25% volume growth, which is more than 2x–2.5x the assumed industry growth rate of 8%–10%.
- Customer commitments de-risk the build: Almost all current-year volume is already committed to existing customers, and management expects future capacities to be fully tapped by both existing and new customers.
- Specialty grades need no extra capex: Existing facilities are already equipped to produce specialty products, so no significant modification investment is required to serve that segment.
Rahul Agrawal: "We have been able to produce more polystyrene in this last year than probably the last decade. And we have proved to be a far more reliable supplier once we have taken over management in the last one year for the entire market, and we see a lot more acceptability from key, reliable, large OEM customers."
Margin Structure & Sustainability
- Material cost anchor: Material cost sits at around 73%–74% of sales, which management considers the normalized situation. When asked if this could gravitate down to 60%–70%, management declined to commit, calling any improvement a gradual process.
- EBITDA per ton improved sequentially: Q2 EBITDA per ton rose to ~INR18,000 from ~INR15,000 in Q1, driven by market conditions, product mix, and efficiency improvements. Management declined to name a normalized figure, saying it depends on variables outside their control.
- Margin protection, not expansion: Management’s stated effort is to protect current EBITDA margin levels, acknowledging that global margins are under more pressure than in India and that this dynamic is expected to persist.
- Brownfield leverage: Margin sustainability is expected to come from brownfield projects diluting fixed costs and improving asset utilization, rather than from pricing power.
- Import substitution without margin sacrifice: The company prices products more attractively to displace imports, but management says it has not seen pressure on margins from this strategy so far.
Rahul Agrawal: "I have never given any indication of target EBITDA margins of 15%. However, I have mentioned earlier as well in all my calls that we need to come to a normalized basis for EBITDA margins, which is achievable in the company using measures such as better capacity utilization, and having a better product mix, improving cost efficiencies wherever possible."
Demand Drivers & End-Markets
- Polystyrene demand is broadening: Significant demand is expected from the air conditioning market, refrigerator market, toys, and other areas, supporting the capacity expansion thesis.
- Import substitution runway: Customers consistently prefer local production over imports when available, citing familiarity, quicker delivery, customization, and greater reliability. Management sees ample room for continued growth by displacing imported products.
- IT hardware: a wait-and-watch opportunity: The government's intention to increase IT hardware manufacturing in India could become a growth driver, but it remains a smaller component for now. Management is monitoring the space.
- OEM reliability premium: Importers may shift business elsewhere for better margins, a behavior that has burned customers in the past. This structural preference for reliable local suppliers acts as a moat.
- Legacy brand substitution is immaterial: Novodur and Luran, legacy INEOS brands, were only 2%–3% of volume. Substitute products already exist and have been partially implemented, making this a non-event.
Rahul Agrawal: "So long as there is local production, customers always prefer local production. So we are able to substitute some of the imported products with our own product. And there is ample room to have that continued growth for the foreseeable future."
Financial Performance
- Half-year revenue declined YoY: Operational revenue fell to INR1,138 crores from INR1,199 crores, and EBITDA margin compressed from 14% to 12.2%, reflecting the normalization from the COVID up-cycle peak.
- Sequential profit improvement: Profit improved over the previous quarter due to higher sales and effective cost management, even as the YoY comparison remained negative.
- Revenue tied to capacity: Management stated that if current pricing is considered normalized, revenue would increase in a similar manner as capacity increases, framing the top line as a volume story.
- H2 FY24 outlook: Volumes are expected to be similar in H2 as in H1, totaling ~1,70,000 tons for the full year, with pricing and margins assumed to remain at current levels.
Management Posture & Unanswered Questions
- No guidance given: Management repeatedly declined to provide revenue, margin, or EBITDA-per-ton guidance for H2 FY24, FY25, or FY26, stating they typically do not provide forward guidance.
- Promoter pledge deflected: When asked about reducing promoter pledge or associated debt, management called it a separate conversation and said the promoter has its own strategy with no recourse to the company or its balance sheet.
- Order book specifics withheld: When asked for the order book for Absolan and Absolac and expected growth after expansion, management pointed to committed volumes but did not provide a specific figure.
- Normalized EBITDA per ton avoided: Management declined to commit to a specific normalized EBITDA per ton number, saying it depends on market conditions, product mix, and efficiencies.
Rahul Agrawal: "If they find better lucrative margins, they'll just move their product business elsewhere. And this has happened in the past. Hence, customers prefer to stick with the suppliers which are going to be more reliable long term."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Volume growth | ~25% volume growth, more than 2x–2.5x industry growth of 8%–10% | Next year (FY25) |
| Total volume available | ~2,05,000 to 2,10,000 tons, driven by debottlenecking and capex | Next year (FY25) |
| FY24 full-year volumes | ~1,70,000 tons total, with H2 similar to H1 | FY24 |
| FY24 pricing and margins | Assumed to remain similar to current levels | Rest of FY24 |
| Capex spend | INR650 crores for ABS and polystyrene capacity expansion | 36 to 48 months |
| Margin protection | Effort is to protect current EBITDA margin levels despite global pressure | Ongoing |
Key Metrics
| Metric | Q2 FY24 |
|---|---|
| Operational revenue | ₹595 cr, up from ₹543 cr in Q1 FY24 |
| EBITDA | ₹86 cr, up from ₹53 cr in Q1 FY24 |
| EBITDA margin | 14.4%, up from 9.7% in Q1 FY24 |
| Net profit before tax | ₹76 cr, up from ₹43 cr in Q1 FY24 |
| Net profit before tax margin | 12.8%, up from 7.9% in Q1 FY24 |
| Half-year operational revenue | ₹1,138 cr, down from ₹1,199 cr in H1 FY23 |
| Half-year EBITDA | ₹139 cr, down from ₹170 cr in H1 FY23; margin 12.2% vs 14% |
| Half-year profit before tax | ₹119 cr, down from ₹148 cr in H1 FY23; margin 10.5% vs 12.3% |
| Full-year FY24 volume expectation | ~1,70,000 tons, annualized, similar to H1 run-rate |
| H1 FY24 volumes | 88,000 tons |
| FY23 volumes | ~1,30,000 tons |
| Volume available for business next year | ~2,05,000 to 2,10,000 tons, post-debottlenecking |
| Current ABS capacity | 85,000 tons per annum |
| Current polystyrene capacity | 66,000 tons per annum |
| Planned capex for expansion | ₹650 cr, over 36–48 months, mostly brownfield |
| Target ABS capacity post-expansion | 2,10,000 tons per annum |
| Target polystyrene capacity post-expansion | 1,50,000 tons per annum |
| Material cost as a percentage of sales | ~73%–74% |
| EBITDA per ton | ~₹18,000, up from ~₹15,000 in Q1 FY24 (per an analyst's math) |
| Assumed industry growth rate | 7% to 9% annually |
| Company targeted volume growth | ~25%, more than 2x–2.5x industry growth |