Key Takeaways
- Volume down, margin up: Sales volume fell 13.5% QoQ due to a planned shutdown, yet PBDIT margin expanded 2.8 points QoQ to 15.9% on better realizations and mix.
- Debottlenecking delivers capacity, not yet volume: PS capacity at Dahej jumped from 66 KT to 100 KT, but the shutdown cost ~3,500-4,000 tons of production; the full volume benefit only accrues in FY26.
- Product mix upgrade is now visible: Two new premium brands launched (STYROLOY, ASALAC), with management expecting them to become a significant part of the mix next year.
- Management pushed back hard on analyst margin math: The company flatly denied ever giving ₹18-20 EBITDA per kg guidance, calling it analyst inference, and declined to quantify fuel savings or a sustainable GP level.
- What to watch next quarter: Whether the PS ramp-up toward 100 KT begins in earnest, any quantification of the HIPS expansion CAPEX after the Toyo engineering study, and the pace of STYROLOY/ASALAC volume build.
Volume & Plant Operations
- Shutdown drove the volume drop: The 13.5% QoQ sales volume decline was primarily due to a shutdown at Dahej for PS debottlenecking, which cost an estimated 3,500-4,000 tons of lost production and sales.
- PS capacity now materially larger: Debottlenecking completed end-September 2024, taking Dahej PS capacity from 66 KT to 100 KT with minor capex. Gradual ramp-up is underway; FY26 gets the full-year benefit. For FY25, volumes will land between 65 KT and 100 KT since the expansion came after half the year.
- ABS debottlenecking next: Plan to complete ABS debottlenecking in H2 FY25. Management called the additions incremental and declined to quantify near-term tonnage, but said annualized additions will be in line with or ahead of the investor presentation.
- HIPS expansion entering engineering phase: Toyo Engineering awarded the contract for a 150 KTPA HIPS capacity expansion at Dahej, effectively more than doubling HIPS capacity. A 6-7 month engineering study will determine exact CAPEX, timeline, and final capacity. Initial estimation suggests the project is value-accretive.
- Inventory intentionally elevated: Inventories were kept high to avoid losing sales during the debottlenecking cycle (PS done, rubber upcoming). Vessel bunching at quarter-end also contributed. Normalization expected by year-end.
- Production guidance intact: The 2 lakh ton production guidance for FY25 stands; sales volume will follow in line with stated growth.
Agrawal: "One has to look at our annual performance because quarter-on-quarter, there are changes because of these different markets that we cater to... on an annualized basis we get a truer picture."
Profitability Drivers
- Margin expansion despite the volume hole: PBDIT margin reached 15.9%, up 2.8 points QoQ and 1.5 points YoY. The improvement came from better price realizations (largely restricted to July, then normalized), product mix shifts, freight-related price movements that also normalized by August/September, and some formulation cost optimization.
- Raw material prices were benign sequentially: Styrene monomer, butadiene, and acrylonitrile did not change much QoQ. Butadiene rose YoY; acrylonitrile was stable. No significant inventory gains or losses in the quarter. Price increases were passed to customers, visible in realizations.
- Management disputes a sustained butadiene arbitrage: On the question of a 15-20% pricing differential between India and Europe, management said any such gap would be short-term and month-specific, not a prolonged structural advantage.
- Fuel mix savings beginning to flow: The Nandesari rubber plant has outsourced steam from renewable sources since January. Dahej installed its own renewable system recently; benefits started accruing now, with the full-year benefit in FY26. Katol (SAN production) renewable conversion is anticipated in the next few months.
- Management refused to pin down a sustainable GP or EBITDA per kg: When asked where margins settle structurally, management said to look at annualized figures, noted product mix changes quarter-to-quarter, and declined to hazard a guess on a new sustainable GP level. The company also denied ever giving ₹18-20 EBITDA per kg guidance, calling it analyst inference.
Agrawal: "The three so called pillars of our strategy remain the same. One is we do cost rationalization measures through different means. We try to get better operating leverage with higher capacities, build up and utilization. And finally, obviously, better product mix."
Product Mix & New Launches
- Two new premium brands launched: STYROLOY (blends of PC ABS, Nylon ABS and other products) and ASALAC (ASA, a weatherable product for automotive and other industries). Additional FR products in ABS, HIPS, and pre-colored HIPS are also being added.
- OEM mix is rising structurally: OEM percentage in ABS-SAN has seen incremental increases. PS OEM mix has moved from under 25% to over 30%. The trajectory is in line with projections.
- New products to become material in FY26: Management expects "a few hundred tons" currently to increase significantly quarter-on-quarter, with the full effect of STYROLOY and ASALAC visible next financial year. Month-on-month growth is already significant.
- Market share gains continue: PS volumes grew from ~46,000-47,000 tons in the INEOS era to 65,000 tons last year, with further growth projected. Competitive pressures remain the same; the company is taking share.
Demand Environment
- Auto demand is mixed but net positive: The company supplies two-wheelers, four-wheelers, commercial vehicles, and EVs. Demand is still quite good overall; slowdown seen in certain pockets but other pockets show good demand.
- Global impact on India is largely priced in: Management believes whatever global impact could hit the Indian market has already happened or is happening; not much expected to change going forward.
- ABS market can absorb domestic additions: The market is large enough to absorb most domestically produced volumes. Domestic consumers prefer domestic suppliers, so market gains will come at the expense of imports. Short- and medium-term pressures may arise, but long-term incremental capacity additions will be absorbed.
- Seasonality persists: Seasonality in demand for specific sectors will continue; the height of peaks and depth of troughs may change. Q3 is expected to be average based on historical industry trends.
Agrawal: "We also believe that the consumers domestically would prefer to buy from domestic suppliers. So, a lot of the market gains for all domestic production will come at the cost of or expense of imports which are currently happening into the country."
Pricing & Commercial Terms
- Monthly contracts dominate: Most contracts have monthly pricing; changes happen in the month itself with no real lag. A few instances of quarterly pricing exist where a quarter lag could occur.
- Price realizations spiked then normalized: Better realizations in Q2 were largely restricted to July, driven by freight-related price movements. These normalized in August and September. Management cautioned against reading too much into a single quarter's realization trend.
- Management deflected on sustainability of realizations: When asked whether higher realizations are sustainable and where EBITDA per ton settles, management said quarter-on-quarter analysis can be misleading and pointed to annualized figures as the truer picture. No specific settling point was given.
Balance Sheet & Capex
- Receivables rose on higher rates: Receivables increased because of higher rates; volume comparison to the prior quarter was also higher. Trade payables also increased, partially compensating.
- Contingent liabilities reduced: Contingencies dropped drastically from the previous year as some cases came in the company's favor. No provision made; management believes remaining cases will also be decided in their favor.
- ₹650 crore capex plan progressing: Engineering studies for part of the plan are nearing completion. Management has some sense of CAPEX required and expansion timeline but is ascertaining numbers before releasing to the public domain; an update is forthcoming soon.
- Payout policy tied to capex timing: If expansion can be brought forward and funds are required, funds will be demarcated toward that purpose. If prolonged, funds may be distributed per management decision at that time.
Agrawal: "We are in the process of ascertaining the same and ensuring that we have the right information and we are sure of it before we release that information into the public domain, which we plan to do in a short period."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| PS capacity ramp-up | Gradual ramp toward full 100 KT utilization | FY26 for full-year benefit; FY25 volumes between 65 KT and 100 KT |
| ABS debottlenecking | Complete debottlenecking exercise | H2 FY25 |
| Production guidance | 2 lakh tons production for FY25 | FY25 |
| Volume growth | Maintain previously indicated volume growth guidance (capacities grow, volumes follow) | Ongoing |
| HIPS expansion CAPEX & timeline | Toyo engineering study to determine exact CAPEX, capacity, and completion timeline | 6-7 month study from Q2 FY25 |
| Renewable energy benefits | Full-year benefit of Dahej and Nandesari conversions; Katol conversion to follow | FY26 for full-year benefit; Katol in next few months |
| New product contribution | STYROLOY and ASALAC to become significant addition to overall product mix | FY26 |
| Capex plan disclosure | Update on ₹650 crore plan once numbers are ascertained | "In a short period" |
Key Metrics
| Metric | Q2 FY25 |
|---|---|
| Revenue | ₹653 cr, down 6% QoQ and up 10.3% YoY |
| PBDIT | ₹105 cr, 15.9% margin, better by 2.8 ppt QoQ and 1.5 ppt YoY |
| PAT | ₹70 cr, 10.6% margin, better by 1.9 ppt QoQ and 1.2 ppt YoY |
| Sales volume | 42 KT, down 13.5% QoQ and down 7.3% YoY |
| H1 FY25 revenue | ₹1,352 cr, up 19% YoY |
| H1 FY25 PBDIT | ₹197.4 cr, 14.5% margin, better by 2.4 ppt YoY |
| H1 FY25 PAT | ₹131.3 cr, 9.6% margin, better by 1.9 ppt YoY |
| H1 FY25 sales volume | 90.1 KT, up 6.5% YoY |
| PS capacity post-debottlenecking | 100 KT (up from 66 KT), completed end of September 2024 at Dahej |
| PS production lost to debottlenecking shutdown | 3,500–4,000 tons of lost production and some sales in Q2 |
| FY25 production volume guidance | 2 lakh tons, maintained |
| ABS demand in India (last year) | ~320,000 tons, company did 85,000–90,000 tons, projecting over 100,000 tons this year |
| ABS imports into India | Close to 50% or higher of total demand |
| OEM share in ABS-SAN mix | A little higher than 50% |
| OEM share in PS | 30% or higher, up from less than 25% historically |
| STYROLOY and ASALAC sales volume | Up to close to 100 tons a month |
| Working capital increase in H1 FY25 | ~₹210 cr, ₹123 cr from inventories and ₹78 cr from trade receivables |