Key Takeaways
- Revenue dipped, margin rose: Revenue fell 5% QoQ on seasonal softness and a sharp export slowdown, yet PBT margin improved 100 bps to 18% as steel costs eased and pricing held.
- Exports surprised on the downside: The export share dropped from 32% to 23% YTD, with the speed of the decline catching management off guard; the silver lining is that the bottom was reached quickly, and a recovery is now underway.
- Rail is a timing story, not a demand story: Rail buying paused and will stay soft through December, but a new 10,000-wagon order plus a pre-election spending pattern point to a strong January–April.
- The capex cycle is on track: The greenfield SRB/CRB plant has foundations laid and assets ordered, with machine runoff expected in late 2024 and a ramp-up from January 2025; the company is already importing components to get ahead of the curve.
- What to watch next quarter: Whether the promised export recovery materializes in the second half, the pace of the rail order book conversion in January, and any further softening in China wind or North American truck markets.
Export Slowdown & Recovery
- Where the damage hit: China wind energy exports tanked, North America softened, ASEAN declined, and Australia and Europe stayed flattish; the export pie shrank from 32% to 23% YTD.
- Speed surprised management: The slowdown itself was expected, but the velocity of the drop was not; management described it as a quicker bottoming-out than the gradual decline it had anticipated.
- Inventory correction amplified the move: American companies, including the parent, concentrated on lowering safety stocks and converting inventory into cash; with a 3–4 month sailing time from India to North America, the destocking effect hit hard.
- Recovery is already visible in rail exports: North American rail is "pretty okay now," the order book is healthy, and railway exports are "pretty much back to normal."
- Class A truck exports remain tight: The last three to four months have been constrained, though the most recent month showed a slight change.
- Full recovery timeline: Management expects exports to climb back above 30% of revenue in the second half of FY25.
Koul: "I think slowdown was not a surprise, but the speed of slowdown was a little bit of a surprise. The good thing about quick bottom out is that then the rise also quick. So that is the general trend of last 25 years."
Railways: Timing the Rebound
- Current softness is buying-driven, not order-driven: Rail shrunk this quarter because of the pace of procurement, not a lack of demand; buying is expected to remain slow through October, November, and December.
- January inflection point: From January onwards, railway buying should start ramping up holistically, supported by a new wagon order for 10,000 wagons translating to roughly 80,000 bearings.
- Election-cycle tailwind: Regression analysis of the last 7–8 national elections shows buying improves before national elections; with elections likely in June/July, the January–April window should be very strong.
- Product upgrade locked in: Timken introduced a high-capacity Class-E bearing for freight cars that has received RDSO approval; all players must now work to that specification, reinforcing Timken's position.
Koul: "I don't think anybody can pay their supply chain overnight."
Steel Segment Moat
- Structural dominance: Timken maintains 26 sites inside steel companies performing mill tech services including mounting, demounting, grinding, de-choking, and choking bearings; no other bearing company in India has that capability.
- Mastery of Indian operating conditions: Management argues that running steel mills in India is a fundamentally different challenge from running European or Japanese mills, and Timken has mastered that environment in a way competitors cannot easily replicate.
- Ultra-clean steel optionality: India is expected to produce ultra-clean steel at some point, a development that would further strengthen the domestic steel ecosystem Timken serves.
Koul: "Running Indian steel mills in India, running European mills in India versus European mills in Europe or Japanese mills in Japan, running in India is a little bit of a different animal, which we have mastered. So I don't see on the steel side that we can get out of the position we are in."
Capex & Capacity Expansion
- Greenfield SRB/CRB plant on schedule: Foundations are laid, orders for all assets are placed, and PEB erection work is underway; machine runoff and PPAPs are expected in the last quarter of calendar 2024, with ramp-up from January 2025.
- Pre-building the supply chain: The company is already importing components for 1,000 bearings, assembling and shipping them from the existing plant to get ahead of the curve before the new plant comes online.
- Ramp-up trajectory: Once operational, the plant will take approximately three years to reach full utilization running six days, three shifts flat out.
- Gross margin outlook: Margins are expected to stay flattish to slightly uppish; more export volume will not produce a hockey-stick margin improvement, but operating leverage from producing more out of the same assets provides a cost edge.
Domestic & Vertical Dynamics
- Heavy trucks are not buoyant: The domestic mobile segment, particularly heavy trucks, is currently soft; tipper and heavy-haulage sales matter more to Timken because they use differential pinion bearings, while lighter 2–12 ton trucks are commoditized on wheel-end bearings.
- Tractors holding up: The tractor segment has not been bad this year, and next year could get better.
- Wind: China down, India not yet up: China's wind market is tanking; India does not yet have a great domestic wind market, though Adani is accelerating with 3-megawatt turbines; gearbox exports to ZF and Flender were strong last year but are in a downturn now.
- Distribution expansion underway: The company is continuously developing more distributors in hinterlands and enhancing its channel digitally and technologically.
- Non-bearing products on the horizon: Management acknowledged interest in bringing the parent's non-bearing transmission products like couplings and chains to India, but noted that importing at Indian price points is not viable; a local supply chain or plant would be needed, and no specific timeline was committed.
Koul: "Knowing the Indian price points, importing a belt out of Carlisle in US and selling in India, I don't think is possible, but it can be a regular business. So the only way it can be done is to have a supply chain model in India or a plant in India to augment both exports to the parent and sales in India."
Margin Drivers
- Q2 margin walk: PBT margin improved 100 bps QoQ to 18%, driven by price realization, steel price softening, lower volume cost control providing better leverage, and an easing of inflation.
- Steel and pricing were the levers: The current quarter's margin improvement specifically benefited from steel cost tailwinds and pricing discipline.
- Operating leverage is the structural edge: While export volume alone will not transform margins, producing more out of the same fixed asset base provides a sustainable cost advantage.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Full-year performance | Will certainly do better than last financial year | Closing this financial year |
| Holistic growth recovery | Another one more quarter to start hitting holistic growth | Q3 FY24 onwards |
| Rail buying recovery | Ramp-up from January, supported by new 10,000-wagon order and pre-election spending | January 2024 |
| Export share recovery | Exports to go back to 30%-plus | Second half of FY25 |
| SRB/CRB plant machine runoff | Machine runoff and PPAPs complete | Last quarter of calendar 2024 |
| SRB/CRB plant ramp-up start | Ramp-up from January 2025; full utilization in approximately three years | January 2025 |
Key Metrics
| Metric | Q2 FY24 |
|---|---|
| Revenue | Down 5% QoQ, impacted by seasonality and export market challenges |
| Profit before tax margin | 18%, improved 100 bps QoQ |
| Profit before tax margin (excl. one-time gain) | Improved 30 bps QoQ |
| Export share of total sales | 25% of total sales pie this quarter, vs 32% YTD last year |
| Export share YTD | 23% of total sales pie, down from 32% YTD last year |
| Rail segment share | 15% of total sales pie |
| Mobile other segment share (heavy truck, agriculture) | 21% of total sales pie |
| Distribution segment share | 20% of total sales pie |
| Process segment share (heavy equipment, stationary) | 19% of total sales pie |
| Export split (taper-bearing vs railway) | Roughly 50-50 |
| TRB utilization – Bharuch plant | Three shifts, six days |
| TRB utilization – Jamshedpur plant | Five days closed intermittently to control costs and save electricity |
| Parent company total revenue | $4.5 bn, of which $1.4–$1.5 bn from non-bearing products |
| Imported bearing components assembled and shipped | Components for 1,000 bearings |
| Export share outlook | Inching towards 30% of sales pie in FY25 |