Key Takeaways
- Volume up, revenue muted: CRGO volumes grew 28.1% YoY but revenue rose only 6% because average CRGO steel prices fell from ~₹250–275/kg to ~₹180–200/kg.
- H1 disrupted, H2 recovery underway: Rain, transformer oil shortages and customer intake freezes hit August–September dispatches, but finished goods cleared in October and demand improved 10–15% MoM in October '26.
- New products are live but small: Nanocrystalline cores (₹6.77 cr), radiators (₹2.67 cr) and copper conductors (₹53 lakhs) began contributing, though copper’s FY27 target was cut from ~₹120 cr to a conservatively reduced figure on slow approvals.
- Margins are depressed by absorption: CRGO EBITDA carries the full cost of copper and radiator businesses; once those become self-sustaining, CRGO standalone EBITDA margin improves 1–1.5%.
- What to watch next quarter: Whether the October demand pickup sustains, copper conductor approval velocity, and CRGO price trajectory as domestic and Chinese mills signal increases.
Demand & Volume Recovery
- H1 disruption mechanics: Transformer manufacturers paused intake when their own production stalled on transformer oil shortages and rain, leaving finished CRGO goods lying at Vilas in September-end; those goods were largely dispatched in October.
- October inflection: Demand and revenue improved ~10–15% MoM in October 2026, with CRGO steel prices also firming; management expects momentum to strengthen as customer production normalizes.
- Volume confidence intact: Management is confident of crossing 26,000 metric tons of CRGO volume in FY27, within a 26,000–30,000 range, and targets ~15,000 MT in H2 alone.
- Transformer cycle durability: Management sees no slowdown in transformer volumes or the transformer industry for at least the next two years, supported by continued grid infrastructure investment.
- Inventory is deliberate: Higher inventory levels reflect shipping disruptions from China and Indian mills lacking raw material from Russia and Germany; 70% of current inventory is booked against orders for the next two months.
Nilesh Patel: "There won't be any." (slowdown in transformer volumes and transformer industry as a whole in near to medium term)
CRGO Pricing & Margin Mechanics
- The price-volume disconnect: CRGO prices collapsed from ~₹250–275/kg to ~₹180–200/kg YoY because a top Chinese mill regained BIS certification, ending a supply squeeze that had driven H1 FY26’s extraordinary profitability.
- Normalization, not shortage: CRGO is not in short supply globally; prices vary by region due to duties and MIP restrictions, and current pricing reflects a normal market, not overcapacity.
- Price recovery underway: CRGO prices have already improved 2–3%; domestic mills increased prices this month and Chinese mills quoted higher; further improvement expected over the next six months.
- H2 realization uplift: Realization per ton will improve at least 5–10% in H2 vs H1, with 100% certainty of some improvement.
- New-product margin drag: Copper and radiator businesses are produced in the same premises as CRGO lamination, so their costs are 100% absorbed by the lamination business; once copper becomes self-sustaining, CRGO standalone EBITDA margin improves by 1–1.5%.
- Peak-cycle context: In shortage periods, CRGO EBITDA has reached 25%; current margins reflect normal business conditions, not structural compression.
Nilesh Patel: "When there is a shortage, this EBITDA was 25% also. So that all depends, but this is the normal range. Right now, it's the business what is going, it's a normal business."
New Products: Copper, Radiator, Nanocrystalline
- Revenue contribution so far: Nanocrystalline cores generated ₹6.77 cr, radiators ₹2.67 cr, and copper/aluminum conductors ₹53 lakhs (commercial sales began September 2026) in H1 FY27.
- Copper guidance cut sharply: FY27 copper revenue target revised from ~₹100 cr to ₹45 cr in H2 because EHV transformer audit and approval processes are taking longer than expected due to stringent quality norms.
- Approval bottleneck: Each new customer requires a minimum 2–3 month approval cycle for EHV-grade products; the company works in batches of 3–4 customers at a time, and the rigor is higher than management initially anticipated.
- CTC conductor timeline: PICC and AICC conductor production has begun; CTC line needs another 1–1.5 months as Chinese technicians are yet to arrive for machine finishing, and separate approvals will follow production start.
- Copper margin expectations: Copper business EBITDA margin targeted at 4–5% initially; CTC conductors expected to deliver 6–7% margins once approved and scaled.
- FY28 copper ambition: Conservative FY28 copper revenue target of ₹135 cr, implying a significant ramp from the revised FY27 base.
Nilesh Patel: "Every time we go for a try with 3,4 customers, 3, 4 customers like batches-wise we are doing it. So that is why earlier this, this kind of systems were not there, but nowadays a lot of quality criteria and as we are catering to EHV portion, EHV transformers mainly, they have the stringent quality terms and that is why it's taking time and that's why we have to revise this bit of 5%, 7%."
Approvals & Capacity Expansion
- PGCIL 220 kV approval secured: Power Grid approval received for prime CRGO coil slitting and lamination fittings for transformers and reactors up to 220 kV class at Unit 3, enabling supply to EHV transformers using higher-grade material that is ~15% costlier.
- Revenue and margin uplift from EHV: 220 kV and eventual 400 kV approvals are expected to add ~15% to revenue and a comparable uplift to margin from higher-grade material sales.
- Capacity ramp path: 30–35% annual volume growth to reach maximum 36,000 MTPA CRGO capacity in approximately two years on a conservative basis; faster if approvals accelerate and demand holds.
- New land parcel deferred: Plans for new products on the newly acquired land parcel have shifted to FY28–FY29 from FY27–FY28; product selection and capex amount not yet finalized.
- Bushing venture pivot: The earlier plan to develop bushings through in-house R&D has been shelved as too slow; the company is now seeking a technical tie-up or JV with overseas (Chinese/European) companies, with an agency appointed for the search.
Nilesh Patel: "We have understood that this is a very, very niche product and it will take very, very long years to get approved and all those things. So right now we are looking for a technical tie-up or joint venture with overseas companies..."
Margins & Profitability
- Sequential improvement: Gross margin improved from 15.9% to 17.2%, EBITDA margin from 8.8% to 10.2%, and PAT margin from 6.5% to 7.1% on a half-on-half basis, driven by consistency in CRGO pricing.
- YoY decline is structural, not operational: H1 FY26 was an extraordinary period with material costs rising continuously, generating rare profitability; current margins reflect normal business conditions and are not comparable.
- New-product cost absorption: Copper and radiator business costs are 100% absorbed by the lamination business because production shares one premises and product-to-product capitalization cannot be done once production has started.
- Blended peak EBITDA: At peak utilization across all businesses, average blended EBITDA is expected to reach 11–12%.
- Sustainable PAT range: Normalized PAT margin is 7–9%, with ~8% as a good call; in very strong years it can reach 10–11%.
- H1 FY27 capex: ₹41 cr spent entirely on copper conductor plant machinery and allied facilities, exceeding full FY26 capex.
Nilesh Patel: "I always say that with this such kind of business, this PAT ratio somewhere around 7, 8, 9 and in some of the cases when the years are very good, it can be reached to 10, 11. I am talking about PAT, not EBITDA. But somewhere around 8 is the good call."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| FY27 CRGO volume | Cross 26,000 metric tons (within 26,000–30,000 range) | FY27 full year |
| FY27 revenue | ₹620 cr to ₹660 cr | FY27 full year |
| FY27 H2 turnover | ~₹375 cr | H2 FY27 |
| FY27 H2 CRGO volume | ~15,000 metric tons | H2 FY27 |
| FY27 copper revenue | ₹45 cr (revised from ~₹100 cr) | H2 FY27 |
| H2 realization per ton | At least 5–10% improvement vs H1 | H2 FY27 |
| CRGO price improvement | Further improvement expected | Next six months |
| CRGO standalone EBITDA margin | Improve by 1–1.5% once copper/radiator become independently cost-bearing | When copper becomes self-sustaining |
| CTC conductor production start | 1–1.5 months (Chinese technicians pending) | ~Q3 FY27 |
| FY28 copper revenue | ₹135 cr (conservative) | FY28 |
| FY28 growth pace | 30–40% annually (conservative) | FY28 |
| Capacity to maximum 36,000 MTPA | 30–35% annual growth, reaching peak in ~2 years | ~FY29 |
| New products on new land parcel | Product and capex to be finalized | FY28–FY29 introduction |
| Bushing entry | Via technical tie-up or JV with overseas partner | Timeline uncertain |
Key Metrics
| Metric | H1 FY27 |
|---|---|
| Revenue from operations | ₹242.5 cr, +6% YoY |
| Revenue (H1 FY27 vs H2 FY26) | ₹422.5 cr, +4.6% half-on-half |
| Gross profit (H1 FY27 vs H2 FY26) | ₹41.6 cr, +12.6% half-on-half |
| EBITDA (H1 FY27 vs H2 FY26) | ₹24.8 cr, +22% half-on-half |
| PAT (H1 FY27 vs H2 FY26) | ₹17.2 cr, +13.5% half-on-half |
| Gross margin (H1 FY27 vs H2 FY26) | 17.2%, up from 15.9% half-on-half |
| EBITDA margin (H1 FY27 vs H2 FY26) | 10.2%, up from 8.8% half-on-half |
| PAT margin (H1 FY27 vs H2 FY26) | 7.1%, up from 6.5% half-on-half |
| CRGO sales volume | 11,697 metric tons, +28.1% YoY |
| Average CRGO steel price | ₹180–200 per kg, vs ₹250–275 per kg in H1 FY26 |
| FY27 volume and revenue growth guidance | 30% to 35%, revised from earlier expectation |
| FY27 expected closing revenue | ₹620 cr to ₹660 cr |
| H2 FY27 total turnover target | ~₹375 cr |
| H2 FY27 CRGO volume target | ~15,000 metric tons |
| Operating cash flow | ₹36.9 cr |
| Net cash outflow from investing activities | ₹45 cr, reflecting continued investment in manufacturing capabilities |
| Cash and cash equivalents | ₹74.3 cr |
| Nanocrystalline core revenue | ₹6.77 cr, sales volume ~58,815 kg |
| Transformer radiator revenue | ₹2.67 cr, sales volume ~241 metric tons |
| Copper and aluminum conductors revenue | ₹53 lakhs, commercial sales commenced September 2026 |
| CRGO manufacturing capacity | 36,000 metric tons per annum |
| Copper conductor plant full-fledged revenue capacity | ~₹270 cr |
| FY27 copper revenue target | ₹45 cr in H2, revised from ~₹100 cr |
| FY28 copper revenue conservative target | ₹135 cr |
| Copper business EBITDA margin | 4% to 5% |
| Average EBITDA margin at peak utilization (all businesses) | 11% to 12% |
| CRGO standalone EBITDA margin improvement once new businesses independent | 1% to 1.5% uplift |
| October 2026 demand and revenue improvement | 10% to 15% month-on-month |
| October 2026 volume rise vs earlier months | ~20% to 25% |
| Inventory booked against orders | 70% |
| Sustainable PAT margin | ~7% to 9%, can reach 10% to 11% in very good years; ~8% is a good call |
| CRGO as percentage of transformer cost | 25% to 30% |
| Combined CRGO, radiator, copper/CT as percentage of transformer value | ~50% |
| Capacity ramp-up pace | 30% to 35% growth per year, reaching maximum capacity in next 2 years |
| Q1 FY27 revenue | ~₹132 cr, sales ~6,650 tons (per an analyst's math) |
| Q2 FY27 implied revenue | ~₹100 cr (per an analyst's math) |
| H1 FY27 capex | ~₹41 cr, higher than FY26, entirely for copper conductor plant |
| CRGO pricing improvement from ~₹200 level | 2% to 3% |
| EHV transformer material (220 kV and 400 kV) cost premium | ~15% costlier than normal grade, adding ~15% to revenue and margin |
| CTC conductor expected EBITDA margin | 6% to 7% |
| CRGO prices in Europe vs India | ~15% higher due to MIP |
| CRGO prices in China vs India | ~15% lower |
| Peak-cycle CRGO EBITDA margin potential | 25% |