Key Takeaways
- Revenue surged on a large SLCM order: Top line grew 48% YoY, driven by delivery of 110+ machines to a quasi-government authority, but the order was executed at aggressive pricing and is now complete.
- Margins compressed as CEV-5 costs hit: EBITDA margin fell ~280 bps QoQ as higher production costs of new CEV-5 machines flowed through gross margin; management chose not to raise prices while testing customer acceptance.
- Full-year margin reset guided: Management expects a 150–200 bps EBITDA margin decline for FY26, with H2 improvement from operating leverage and a ~4% price increase now being tested.
- Market share dominance reinforced: SLCM market share climbed to 71% in Q2 and touched ~80% in the last two months, as competitors’ unsustainable CEV-4 liquidation practices faded.
- What to watch next quarter: Whether the ~4% price increase sticks in Q3, the pace of retail liquidity normalization, and whether government project execution delivers the anticipated strong H2 pull.
The CEV-5 Transition: Margin Hit by Design
- Costs rose, prices didn’t: CEV-5 machines carry a higher cost of production, and management deliberately held off on price hikes for two quarters to prioritize on-ground testing and customer acceptance. That cost flowed straight to gross margin.
- Product readiness was early and deliberate: 30% of Q4 FY25 volume and 90% of Q1 FY26 volume was already CEV-5, putting Ajax well ahead of most competitors in placing the new product.
- No hiccups observed: CEV-5 machines have performed well on-ground with no issues reported, and the product is gaining traction with both existing CEV-4 users and new customers.
- CEV-4 inventory fully cleared: All CEV-4 inventory was sold out before the June 30, 2025 regulatory deadline, normalizing cash flow in H1.
- Competitors took a different path: Some rivals used aggressive pricing and commercial practices to liquidate CEV-4 stock that management described as substandard and unsustainable.
Tuhin Basu: "The kind of pricing strategy they, and commercial strategy adopted to get these machines liquidated were not only, let's say, substandard from margin corridors or commercial acumen."
The Large Order: A One-Time Boost, Not a Run Rate
- 110+ machines delivered in Q2: A single large contract from a quasi-government authority was fully executed in the quarter, with no spillover into H2. The order was a major contributor to the 48% YoY revenue growth.
- Pricing was aggressive: Management acknowledged the order was done at “far more aggressive pricing,” so the revenue lift came with a margin trade-off.
- Product mix amplified the H1 margin drag: Slipform pavers, a high-ticket, higher-margin product sold in H1 last year, were absent from the mix this H1, compounding the CEV-5 cost impact.
- Operating leverage cushioned the blow: Despite the gross margin pressure, cost optimization and operating leverage partially offset the EBITDA impact.
Shubhabrata Saha: "This was done at, let's say, far more aggressive pricing."
Market Share & Competitive Position
- Share surged as competitor practices unwound: After some competitors used unsustainable practices including selling without timely registration, Ajax’s market share inched closer to 80% in the last 2–3 months and sustained through October.
- Resale value is the moat: Management cited a resale value advantage of over 10–15% versus the nearest competitor as the reason customers return, a structural advantage that pricing alone cannot erode.
- Price premium is modest but defended: Ajax commands roughly a 3–5% price differential over the next competitor, and management watches competitor product performance and commercial policies closely.
- No new entrants: The competitive landscape is stable; domestic and international players have been around, and intensity is unchanged.
- Market share vs margins is a dual priority: Management stated both are equally important and the company will continue to strive on both fronts, though the quarter’s trade-off was clearly toward share.
Shubhabrata Saha: "I cannot call it, label it at any other form other than unsustainable, which are not correct practices, but we've seen that happen from some of our competition."
Demand Environment: Waiting on the Government
- H1/H2 split is structural: The industry operates on roughly a 40-60 H1/H2 split, and management anticipates the traditional upswing now that the monsoon is over.
- The H2 bet rests on government action: Management hopes the government executes projects and releases pending contractor cash flows, especially in larger states; it cannot speak for the government but expects some issues to be behind “sooner than later.”
- State-level demand is uneven: Maharashtra and Karnataka were impacted by social project spending; Bihar is performing very significantly in an election year; UP is doing extremely well; Gujarat is doing exceedingly well on solar-led applications.
- Retail liquidity is a transient drag: Receivables built up due to delays in retail offtake toward end-September, but cash flows have started normalizing and management sees no health concerns, only timing.
- Dealer inventory has inched up: Inventory rose to ~1 month+ versus the typical 2–3 weeks, but management noted higher inventories have occurred in prior quarters without hurting retail pace.
- Spares and services were muted: Extended monsoon impacted machine utilization, directly affecting spare parts demand; no loss to competition or dealer stocking issues.
Pricing, Margins & the H2 Recovery Path
- Price increase being tested now: Management will test a ~4 percentage point price increase from Q3 onward, with conversations already started; the impact is likely to show in Q4 rather than Q3.
- H2 margin improvement expected: Operating leverage from higher volumes and the anticipated price adjustments are expected to improve the margin profile in H2.
- Full-year margin guidance set: EBITDA margin decline of around 150–200 bps for FY26 versus FY25, a corridor management says has not changed since roadshows.
- The price hike is not the whole story: When asked whether the price increase is necessary for H2 margin to revert to mean, management responded “Not completely,” implying volume leverage also matters.
- FY27 is off the table: Management declined to comment on FY27 guidance, margins, or whether margins could return to FY25 levels.
Tuhin Basu: "I would not like to pre-empt what we are doing in Q3 before Q3 is completed."
Product & Capacity Expansion
- Smaller SLCM product ready for rollout: The new smaller SLCM product has been tested in a beachhead market; management is confident to extend it to 4–6 key markets and begin initial distribution in H2.
- Non-SLCM capabilities building: The company continues to focus on pumps, including boom pumps and concrete pumps, and batching plants, with B2B business concentrated in this portfolio and executed through dealers.
- Hosahalli fourth plant nearing closure: CWIP stands at ~₹35 crores with another ₹10–15 crores capex expected for the full year; rains delayed progress and government approvals may take longer than anticipated, but no hiccups and the project is adequately cash-provided.
- Dealer network expanding steadily: Expansion continues to deepen penetration and availability.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Full-year EBITDA margin decline | 150–200 bps below FY25 | FY26 full year |
| Volume growth | Early double-digit CAGR (below the long-term 18% CAGR) | FY26 full year |
| Price increase | Testing ~4 percentage points; conversations started in Q3 | Q3 onward, impact likely Q4 |
| H2 demand improvement | Traditional upswing expected as monsoon ends; government project execution and contractor cash flow releases needed | H2 FY26 |
| Smaller SLCM product launch | Initial distribution in 4–6 key markets | H2 FY26 |
| Hosahalli plant closure | Targeting H2 closure; ₹10–15 crores additional capex | H2 FY26 |
| Receivables normalization | Cash flows have started normalizing; no health concerns | As the year progresses |
| Retail liquidity | Described as transient; should improve | As the year progresses |
Key Metrics
| Metric | Q2 FY26 |
|---|---|
| Revenue | ₹445 cr, +48% YoY |
| SLCM volume growth | +51% YoY |
| SLCM revenue growth | +55% YoY |
| Non-SLCM volume growth | +8% YoY |
| Non-SLCM revenue growth | +12% YoY |
| Spares and services revenue growth | +26% YoY |
| EBITDA | ₹45 cr, +16% YoY |
| EBITDA margin | 10.2%, declined ~280 bps YoY; impact from higher CEV5 production cost |
| Profit after tax | ₹39 cr |
| H1 FY26 revenue | ₹911 cr, +18% YoY |
| H1 FY26 EBITDA margin | 11.7%, contracted 380 bps YoY |
| Full-year EBITDA margin guidance | Decline of 150–200 bps vs FY25 |
| Full-year volume growth expectation | Early double-digits, below the long-term 18% CAGR |
| SLCM market share | 71% in Q2; reached ~80% in the last two months of the quarter and sustained through October |
| CEV5 share of machines sold in Q2 | 80%+ |
| Return on invested capital | Upwards of 40% |
| Cash and investments | ~₹745–747 cr (investments ~₹710 cr, liquid cash ~₹35–37 cr) |
| Dealer inventory | ~1 month+, up from typical 2–3 weeks |
| Price differential vs nearest competitor | 3% to 5% |
| Resale value premium vs nearest competitor | Over 10% to 15% |
| Spares first-fill rate | 90%–92% |
| Hosahalli plant capex | ₹35 cr CWIP already incurred; another ₹10–15 cr expected for full year |
| Customer mix | One-third each: first-time buyers, smaller midsize contractors, rental companies |