Key Takeaways
- Resilient quarter, cautious H2: Revenue grew 9.5% YoY as non-SLCM surged 64.7%, but management flagged commodity and geopolitical headwinds that make H2 margin expansion a "challenging task."
- Application mix is transforming: Roads fell from 70% of revenue to ~40% in three years, replaced by private-sector factories, buildings and urban infra, a structural shift that reduces dependence on state capex cycles.
- Non-SLCM is the growth engine: Dealer activation across concrete pumps, boom pumps and batching plants drove a 64.7% YoY jump; 62 of 68 dealers now sell at least one pump, and the portfolio will be "aggressively pursued."
- Spares & services is the soft spot: Revenue fell 4.7% YoY as machine running hours dropped ~25%; management is working on supply chain and dealer-level actions to claw back toward aspirational levels.
- What to watch next quarter: Whether the 2% Q4 price hike materializes and proves sufficient against rising steel costs, the pace of spares recovery, and any resolution of contractor payment delays in Maharashtra and Madhya Pradesh.
Demand Environment
- What drove the quarter: Total revenue growth of 9.5% YoY came from both volumes and price, with SLCM up 5.9% on volumes and non-SLCM up 64.7% led by concrete pumps, batching plants and boom pumps.
- The application mix pivot: Roads, once 70% of revenue in FY25, fell to ~40% YTD FY27, while buildings and urban infra rose from 13% to ~39%. This shift toward private-sector demand provided an outlet where state capex was constrained.
- State-level divergence: Volume growth in Gujarat, Chhattisgarh, Karnataka, Telangana, Andhra Pradesh and Uttar Pradesh offset softness in Maharashtra, Rajasthan, Madhya Pradesh and Bihar. Contractor payment delays in Maharashtra and Madhya Pradesh are straining cash flows and dampening equipment investment appetite.
- H2 bet on sentiment: Management expects customer sentiment and demand momentum to improve in H2, noting that 60–65% of annual revenue typically falls in the second half.
Saha: "I would only say this, that we would definitely like to see ourselves in a strong position at the end of the year with close to about double digits."
Non-SLCM & Dealer-Led Growth
- Dealer activation is working: 62 of 68 dealers sold at least one concrete pump, and 12–15 dealers are now active across concrete pumps, boom pumps and batching plants. Dealers previously lacked confidence and capability, which is now establishing.
- Pumps lead the charge: Concrete pumps, with lower complexity and fewer SKUs, drove a large proportion of non-SLCM growth and are easier for dealers to sell.
- Batching plants next: Management is working on simplifying configuration, standardization, commercial scope, and service and parts for batching plants to make them an important portfolio component going forward.
- Private-sector demand as hedge: Where SLCM revenue and volume growth was challenged by capex constraints, private-sector demand provided an alternative outlet.
- Portfolio ambition: The non-SLCM portfolio will be "aggressively pursued" in volume, revenue and margins, and should help gain greater acceleration in service and parts as the car park grows.
Spares & Services Weakness
- The running-hours link: Machine running hours declined ~25% YoY, directly correlating to lower spare parts consumption. The car park has grown over the last three to four years, but management acknowledged that alone cannot explain the shortfall.
- Recovery actions underway: Management is working on supply chain accountability, availability, and dealer-unit-level actions to claw back to aspirational levels. The stated aspiration is to get spares back to ~8–8.3% of top line.
Saha: "I think the machine running hours is a direct correlation to the use of spare parts. On the other front, on the flip side, I think our car park has also improved in the last three, four years. That alone cannot be the reason as to why we are there where we are."
Margins & Commodity Headwinds
- Q2 margin picture: Gross margins improved marginally by ~20 bps YoY despite higher raw material costs, supported by price hikes. EBITDA grew 13.7% YoY and PAT grew 30.4% YoY.
- H1 margin squeeze: Higher raw material costs were largely offset by price increases, resulting in marginal gross margin improvement; EBITDA margin stood at 11.5% versus 11.7% in H1 FY26.
- QoQ gross margin decline: Gross margins fell ~200 bps QoQ, largely driven by commodity cost increases. SLCM at ~₹487 crore dominates the revenue mix, so the commodity impact on SLCM was the primary factor, though product mix (non-SLCM up 17% QoQ) also played a role.
- Steel cost pressure: Steel prices rose from ₹58/kg to ~₹70/kg. The company managed by buying steel at certain prices and providing inventory at the right price, which worked successfully in H1. Management anticipates steel will only go up further, which could dampen margins going forward.
- H2 margin uncertainty: Management called H2 margins a "challenging task," citing uncertainty around the commodity cycle trajectory (steel, aluminum), forex, and geopolitical developments.
Saha: "It will be a challenging task, Vaibhav. I am only saying this because we do not know the trajectory of how the commodity cycle and up move happens, particularly in the area of steel, aluminum, how the forex plays out, and so on and so forth."
Pricing Actions & Inflation Response
- Cumulative price actions: A ~2% hike was taken in Q4 FY26, followed by ~1% in September 2026 and another 1% in November 2026. A planned additional 2% increase is targeted for Q4 FY27.
- Sufficiency is uncertain: Management expects commodity-driven cost increases could be in the range of 2–3%, but called it "anybody's guess" given geopolitical uncertainty post-US events. The company will "work on it and pivot the way it moves."
- September hike benefit pending: The September price increase benefit will reflect from Q3 FY27 onward.
Saha: "I think it's anybody's guess because we don't know how steel and other commodities are likely to move. Our impression is that that move could be in the range of 2%-3%. How much of it pans out, whether there is any softening given the geopolitical situation arising out of what has happened in the U.S. recently, we don't know what is going to happen, but we'll have to work on it and pivot the way it moves."
Strategic Initiatives & Portfolio Expansion
- UDAAN scale-up: Volumes rose from 49 units in H1 FY26 to 216 units in H1 FY27, with geographic expansion from a few states to 20 states, reducing concentration risk. Work is ongoing to add hoist or pump capability to become a complete solutions player in that market.
- ARGO 4000 launch: The ARGO 4000 has been launched, addressing an important gap in the SLCM portfolio.
- Uttar Pradesh opportunity: The UP government is putting in place a circular mandating SLCMs and batching plants in tandem for CC roads, replacing manual mixers, with contracts totaling up to ₹2,000 crores in process.
- Exports gaining traction: Export revenue grew 47% YoY in H1 FY27, with encouraging traction in Africa and Southeast Asia. The export mix is better than domestic at 65% SLCM and 35% non-SLCM. Management is targeting South Africa "sooner than later" as a beachhead and evaluating LATAM markets excluding Brazil.
- Precast ambition: Management expressed clear interest in becoming a full-fledged solution provider in precast concrete, driven by the need for construction at scale and speed, with housing remaining a key concern. Policy direction on standardization could be a powerful driver.
- Organizational restructuring: All manufacturing was brought under a single leader; the head of the Obadenahalli plant moved to procurement and supply chain; services and spares function was aligned with strategy and product planning. SAP implementation was completed in Q2 with a one-time cost of ₹16 crore.
- Inorganic capacity: A cash balance of nearly ₹1,150 crores provides financial flexibility to capitalize on strategic inorganic opportunities.
Saha: "I think the direction that the company will take in the future, and it is a stated purpose within our organization, that we have to lead both thinking and execution the way we address ourselves in the concreting market. There are places that we would like to play, and there are places that we won't."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Full-year growth | Close to about double digits | FY27 year-end |
| Price increase | Additional 2% hike planned | Q4 FY27 |
| Spares recovery | Claw back to ~8–8.3% of top line | No date (actions underway) |
| Non-SLCM pursuit | Aggressively pursued in volume, revenue and margins | Coming years |
| South Africa entry | Beachhead for market expansion | "Sooner than later" |
| UDAAN solution play | Add hoist or pump capability to become complete solutions player | Ongoing |
Key Metrics
| Metric | Q2 FY27 |
|---|---|
| Total revenue | ₹487 cr, +9.5% YoY |
| SLCM revenue | ₹395.8 cr, +5.9% YoY |
| Non-SLCM revenue | ₹55.8 cr, +64.7% YoY |
| Spares and services revenue | ₹35.4 cr, -4.7% YoY |
| Gross margin | +20 bps YoY, marginal improvement supported by price hikes |
| EBITDA | ₹51.5 cr, +13.7% YoY |
| PAT | ₹50.9 cr, +30.4% YoY |
| H1 FY27 total revenue | ₹961.5 cr, +5.5% YoY |
| H1 FY27 EBITDA margin | 11.5%, vs 11.7% in H1 FY26 |
| H1 FY27 PAT | ₹106.5 cr, +16% YoY |
| Cash and cash equivalents | ₹1,151 cr, as of Sep 30, 2026 |
| Working capital cycle | 22 days |
| H1 FY27 ROCE | 19% |
| H1 FY27 ROE | 14% |
| SLCM retail market share | 75.5% in H1 FY27, +480 bps YoY from 70.7% in H1 FY26 |
| Export revenue growth | +47% YoY in H1 FY27 |
| Export share of revenue | 7.4% in Q2 FY27, vs 9% in Q1 FY27 |
| UDAAN series volume | 216 units in H1 FY27, vs 49 units in H1 FY26 |
| Machine running hours | -25% YoY |
| Roads share of application mix | ~40% YTD FY27, vs 67% in FY26 and 70% in FY25 |
| Building and urban infra share of application mix | ~39% YTD FY27, vs 15% in FY26 and 13% in FY25 |
| Price increase taken in September 2026 | ~1%, following ~2% in Q4 FY26; another 1% in November 2026 |
| Raw material cost increase in H1 FY27 | close to mid-single digits |
| Steel price movement | ₹58/kg to ~₹70/kg, last program at ₹68/kg; anticipation of ₹75-76/kg |
| SAP implementation cost (one-time) | ₹16 cr |