Key Takeaways
- Volume-led beat, cost-led margin: Sales volume hit a record 1.66 crore tons (+20% YoY) while total costs fell 5% YoY, driving a 58% EBITDA jump even as acquired assets still ramp toward group-level margins.
- Capacity target raised again: FY28 cement capacity target revised from 14.0 to 15.5 crore tons, with debottlenecking adding 1.5 crore tons at just \$48/ton and three new clinker lines taking clinker to 9.6 crore tons.
- Acquired assets are the margin bridge: Penna and Sanghi currently earn below the base business EBITDA of ~₹1,189/ton; management expects them to reach four-digit EBITDA as utilization climbs, forming the path to the ₹1,500/ton FY28 target.
- Integration speed is a real differentiator: Penna and Orient Cement sales moved under Ambuja/ACC brands within days, and sharp profitability improvement followed, validating the Adani playbook for cement roll-ups.
- What to watch next quarter: Whether Sanghi utilization reaches the promised 65–70% in Q3, the pace of the ₹400/ton cost-reduction journey, and any clarity on clinker debottlenecking scope beyond Sanghi.
Volume & Market Share
- Record quarter despite monsoons: Q2 sales volume of 1.66 crore tons, up 20% YoY, was the highest ever for a second quarter and came despite prolonged monsoons that typically depress construction activity.
- Outgrowing the industry by a wide margin: Market share rose 1% to 16.6%, with Ambuja’s growth rate almost 5x the industry average of 4%. Excluding Orient and Penna, organic growth was still 11%.
- Double-digit growth seen as sustainable: Management targets double-digit volume growth for many quarters, anchored to 10–15% annual capacity expansion, though 20% may not repeat as the base grows with maturing acquired assets.
- Demand uptick in key clusters: Western markets (Sanghi) and Southern markets (Penna) saw healthy demand improvement; Orient primarily serves the high-EBITDA Western market including Mumbai.
- Industry demand outlook bullish: Management reiterated a 7–8% annual industry growth expectation and noted that a GST cut from 28% to 18% would further boost premium cement demand.
Bahety: "Industry average at 4% growth without Orient and Penna, I would be at 11% growth."
Cost Leadership & Margin Trajectory
- Kiln fuel cost the lowest among peers: At ₹1.65 per 1,000 kilocalories (excluding AFR), management expects this to sustain or improve further as the alternative fuel mix rises.
- Logistics cost falling structurally: Logistics cost dropped 7% YoY to ₹1,224/ton; primary lead distance fell 2 km to 265 km, with another 50 km reduction expected as the geographic footprint expands.
- Power cost has a clear glide path: Power cost targeted to fall from ₹6 to ~₹4.5 per unit by FY28, saving ~₹1.5/unit, driven by green power share rising from 33% now to 60% by FY28.
- New clinker lines are step-change efficient: New 0.4 crore-ton lines consume ~680 kcal vs ~730–740 kcal for existing assets, and under 50 units of power per ton of clinker vs over 60 units currently, pulling up the fleet average.
- ₹400/ton cost reduction journey: ₹250 of the targeted reduction comes from power and fuel; the balance from operating leverage, digital initiatives, and logistics efficiencies, with real improvements beginning next financial year.
- Other expenses already improving: Other expenses at ₹774/ton included a ₹62/ton reduction from synergies and efficiency gains; kiln maintenance done in Q2 will yield benefits in coming quarters.
- Working capital built deliberately: ~₹2,000 crore working capital increase in 1H reflects higher B2B receivables, higher finished goods stock, and 2–3 months of coal inventory built as cost mitigation, not operational strain.
Bahety: "At INR1.65, excluding the AFR, it is lowest among the peers, and it is likely to sustain/further reduce with increasing trend of AFR."
Capacity Expansion & Debottlenecking
- FY28 target raised to 15.5 crore tons: Cement capacity target revised up from 14.0 crore tons; clinker target raised from 8.4 to 9.6 crore tons, supported by three new kilns at Bhatapara, Sanghi (potential), and Penna Marwar.
- Debottlenecking adds capacity at low cost: Phase 1 covers 13 locations, adding 1.5 crore tons at \$48/ton on an integrated basis, by adding roller presses to complement existing ball mills for higher grinding throughput.
- More debottlenecking likely: Management indicated further locations may follow Phase 1, and clinker debottlenecking details will be shared separately. Sanghi has an in-built 5–10% cushion.
- Commissioning timeline is tight: Bhatapara clinker line trial runs have started; Penna Marwar expected to light up this month (November 2025); Salai Banwa, BCCI, Dahej, and others due in Q3; several greenfield/brownfield projects targeted for completion by FY26-end.
- Delays attributed to weather: Six projects (Bathinda, Bhatapara, Maratha, Salai Banwa, Jodhpur, Krishnapatnam) saw one-quarter delays from torrential rains and flood-like conditions; management did not provide revised timelines or quantify confidence in the new schedule.
- Capacity utilization varies by asset: Base assets running above 75%; Orient at healthy levels given Western market exposure; Penna influenced by Southern industry trends; Sanghi (coast-based, Q2 rains) expected to move to 65–70% in Q3 and Q4.
- Capex run-rate: Approximately ₹8,000 crores in capex annually to fund the expansion program.
Bahety: "These debottlenecking initiatives across the plants will add 1.5 crore tons in our capacity at a much lower capex of $48 per ton."
Acquired Assets Integration
- Fastest integration yet: Penna and Orient Cement sales moved entirely under Ambuja and ACC brands within days (except initial few days for Orient), resulting in sharp profitability improvement.
- Margin gap is the opportunity: Excluding acquired assets, base business EBITDA is ~₹1,189/ton. Penna and Sanghi currently earn below that, but management expects them to reach four-digit EBITDA as utilization improves, then grow from there toward the ₹1,500/ton FY28 target.
- Sanghi utilization set to inflect: After a subdued Q2 (coastal location, monsoon impact), Sanghi is expected to reach 65–70% utilization in Q3 and Q4, a meaningful step-up that should narrow the margin gap.
- Brand building spend is deliberate: ₹70/ton additional cost from sales promotion and maintenance will continue; investments in Penna and Sanghi have been made and results will start flowing in. Brand building is described as a continuous exercise.
Bahety: "Even if I expect it to achieve 4 digits, we see a very healthy improvement in terms of the EBITDA to sustain 4 digits and then to grow from there."
Digital, Sustainability & Brand Initiatives
- CINOC launched: The Cement Intelligent Network Operations Center uses AI across the enterprise fabric for efficiency, productivity, and stakeholder engagement, signaling a serious digital bet.
- Green power scaling fast: Green power share rose 14.3% to 33% in Q2; renewable capacity expected to reach ~900 MW by FY26-end and 1,122 MW by FY27, on track for the 60% target by FY28.
- Carbon credit income on the horizon: Management estimates ₹200–225 crores in additional income from carbon credits as the framework matures, calculated at \$8–\$10 per ton.
- Brand and channel investments deepening: Adani brand integrated into the cement business; Adani Cement FutureX launched covering ~400 institutions and 4 lakh students; Dhanvarsha CEO Club, Samvaad (B2B engagement), and Nirman Utsav (CREDAI collaboration) all rolled out.
- Blenders to lift premium mix: 13 blenders being installed at plants over 12 months to optimize product mix and increase the share of premium cement.
- RMC business building slowly: Targeting ~5% of full-scale cement capacity consumed in RMX by FY28, with ~365 RMX plants planned over the next couple of years.
- Logistics debottlenecking: Expected to improve capacity utilization by 3% over 24 months; strategic partnership signed with CONCOR for tank container movement, supporting net-zero commitments and enabling bulk cement terminals.
Bahety: "AI will run deep into our enterprise fabric, bringing efficiency, productivity and deeper engagement with the stakeholders across the value chain."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Cost exit rate | Total cost ~₹4,000 per metric ton (5% reduction from ~₹4,200) | March 2026 |
| Cost target | ₹3,800 per metric ton | March 2027 |
| Cost target | ₹3,650 per metric ton | March 2028 |
| Cement capacity | 15.5 crore tons | FY28 |
| Clinker capacity | 9.6 crore tons | FY28 |
| EBITDA per ton | ₹1,500 | FY28 |
| Green power share | 60% | FY28 |
| Power cost | ~₹4.5 per unit (from ~₹6 currently) | FY28 |
| Renewable capacity | ~900 MW | FY26-end |
| Renewable capacity | 1,122 MW | FY27 |
| Debottlenecking capacity addition | 1.5 crore tons at \$48/ton (Phase 1, 13 locations) | No end date stated |
| Logistics debottlenecking | 3% capacity utilization improvement | 24 months |
| Blender installation | 13 blenders to increase premium cement share | 12 months |
| Sanghi utilization | 65–70% | Q3 and Q4 FY26 |
| Volume growth | Double-digit | Next many quarters |
| RMC plants | ~365 plants | Next couple of years |
| Carbon credit income | ₹200–225 crores additional income | As framework matures |
Key Metrics
| Metric | Q2 FY26 |
|---|---|
| Sales volume | 1.66 crore tons, up 20% YoY, highest ever Q2 |
| Revenue | ₹9,174 crores, up 21% YoY |
| Price gain | 3% |
| EBITDA | ₹1,761 crores, up 58% YoY |
| EBITDA per ton (consolidated) | ₹1,060 |
| Profit after tax | ₹2,302 crores, up 364% YoY; includes one-time tax write-back of ₹1,697 crores |
| Earnings per share | ₹7.2 per share, up 267% |
| Net worth | ₹69,493 crores, up ₹3,057 crores QoQ |
| Total cost per ton | ~₹4,200, reduced 5% YoY; target exit March '26 at ~₹4,000 |
| Kiln fuel cost (excl AFR) | ₹1.65 per 1,000 kilo calories, lowest among peers |
| Kiln fuel cost (incl AFR) | ₹1.60 per 1,000 kilo calories, reduced 2% |
| Logistics cost per ton | ₹1,224, down 7% YoY |
| Other expenses per ton | ₹774, vs ₹712 in Q1; reduction of ~₹62 per ton from synergies and efficiency gains |
| Market share | 16.6%, up 1% |
| Premium products share of trade sales | 35%; premium cement sale growth of 28% YoY |
| Capacity utilization (consolidated) | ~65% to 67% |
| Green power share | 33%, up 14.3% |
| Renewable energy capacity | 673 MW, expected to reach ~900 MW by end of FY26 |
| Primary lead distance | 265 km, down 2 km; expecting another 50 km reduction |
| Capacity addition in FY26 | ~1.12 crore tons, reaching ~11.8 crore tons by year-end |
| Revised capacity target by FY28 | 15.5 crore tons cement, 9.6 crore tons clinker |
| Debottlenecking capacity addition | 1.5 crore tons at $48 per ton capex on integrated basis |
| Logistics debottlenecking capacity unlock | 0.3 crore tons (3% of current 10.7 crore tons) over 24 months |
| RMC cement consumption | ~2% of total, targeting ~5% by FY28 with 365-odd RMX plants |
| EBITDA per ton (excl acquired assets) | ~₹1,189 at base capacity |
| FY28 EBITDA per ton target | ₹1,500 |
| Carbon credit estimated additional income | ₹200-225 crores, at $8-$10 per ton |