Key Takeaways
- PAT down 2.4% YoY, but revenue guidance held: Higher interest, tax and planned other expenses compressed PAT, while the company reaffirmed its 15-20% revenue growth target for FY26.
- Order book rebuilt from a weak opening: After a near-zero Q1, domestic orders revived to a ~₹200 crores per quarter strike rate, and the order book is expected to close FY26 at about ₹600 crores.
- Three new business lines opened in one quarter: Nuclear, thermal power and precision components each won debut orders, diversifying the pipeline beyond traditional oil & gas and petrochemicals.
- Working capital is the drag to watch: Average working capital sat at 2.2 turns (₹367 crores), well below the 3-turn target, driven by lower customer advances and higher debtors on long-cycle orders.
- What to watch next quarter: Whether working capital turns recover toward 3-4 by year-end, the pace of U.S. inquiry conversion after trade deal clarity, and any firm FY27 growth number.
Revenue & Profitability Mechanics
- PAT decline decomposed: Three factors drove the 2.4% YoY PAT drop: EBITDA change contributed 0.5%, higher interest/financing cost from the working capital block added 0.6%, and a tax normalization (last year benefited from ESOP-related lower tax) added 0.9%.
- Other expenses rose by design, not accident: At 24.5% of revenue vs 18% YoY, the increase was driven by royalty on licensed proprietary equipment (1.3%), labor and subcontracting (1.5%), contractual expenses including site back charges (2.2%), and freight on over-dimensional export consignments (0.5%): all factored into the plan.
- EBITDA margin compressed on product mix: Scaling up high-volume, low-margin products pulled the margin lower; management guided a range of 21-22% and an endeavor to stay above 20% going forward.
- Q3 revenue dipped QoQ as expected: Q3 is historically weaker due to festivals in the manufacturing zone; Q2 is always better, and Q3 was exactly on plan.
- Export mix held above half: Exports contributed ₹328 crores at 53.4% of revenue, with oil & gas and petrochemicals dominating at 73% and heat exchangers at 57% of the mix.
- All three plants contributed: Ahmedabad led at ₹405 crores (66%), Kheda at ₹186 crores (30%), and Mabel at ₹23 crores (4%), with Mabel revenue mainly from site fabrication work that is higher in Q4.
Order Book & Demand Environment
- Order book declined YoY but is rebuilding: At ₹550 crores vs ₹740 crores last year, the drop reflects a near-zero Q1 when exports were impacted and domestic did not revive; Q2 and Q3 improved to a ~₹200 crores per quarter strike rate.
- Domestic orders have flipped the mix: Last year order booking was mostly exports because domestic was "literally zero" for three quarters; now domestic contribution is way higher than export in the pending order book.
- U.S. trade uncertainty caused deferrals: Over the last 5-6 quarters, uncertainty around tariffs at the time of dispatch prompted customers to defer U.S.-bound projects, even though the company remained cost-competitive against U.S. fabricators.
- Strategic blocks compensate for a lower opening order book: The company shifted focus to higher-volume, lower-cycle-time equipment (6-7 months to complete) and a services business (1.5-2 months turnaround, very profitable) to build the pipeline for next year even with a lower opening order book.
- Pricing power is under pressure: As demand softened, vacant capacities in India and abroad led to margin aggression in pricing; the company is watchful and wants to grow profitably.
- Inquiry pipeline is healthy at ₹1,100 crores: Over the last 3-4 months the pipeline has ranged between ₹900-1,200 crores, with ~60% exports and 40% domestic; finalizations are expected to improve as trade deal clarity emerges.
D'Souza: "With a higher strike rate, we can definitely get a strike rate, but then I'll have to compromise on margins to get that business. So I would like it to be in the region of maximum 20% to 25% and improve the inquiry pipeline and keep that strike rate at that level."
New Business Lines & Diversification
- Nuclear debut via NPCIL Kaiga: A successful order worth ₹20-30 crores from a renowned EPC company to supply equipment for the Kaiga project; the aim is to execute well and expand into more critical nuclear business, including steam generators worth ₹400-500 crores per set.
- Thermal power entry with NTPC: An order worth ₹20-30 crores to supply low-pressure feed water heaters for the Nabinagar and Gadarwara projects; three more large projects are expected, with a total feed water heater opportunity of ₹700-800 crores.
- Precision machine components with GE: A small debut order to supply critical components for turbine frames, providing visibility for the next 2-3 years; the company may be on a nomination basis as the only Indian firm pursuing this.
- Anup Technical Services scaling: The services business has booked its 10th order over the last 6 months, executed 5 with 5 under execution; the target is ₹200-300 crores turnover in 3 years at ~40% margin.
- High-volume products as a growth block: Targeting ₹200-300 crores in 3 years at ~15% EBITDA, alongside a conventional business target of ~₹1,000 crores.
- Inorganic growth on the radar: The company is working on diversification and strategic opportunities in energy-related technologies, specialty chemical sectors, and package systems.
D'Souza: "I'll give you a simple product like a steam generator, which is required for NPCIL projects. One set is in the range of INR400 crores to INR500 crores. But of course, we need to work hard to get there, build our credibility."
Facilities & Capacity
- Kheda Phase 2 fully commissioned: Now operational with three completed manufacturing bays and one open yard across 20,000 sq meters of fabrication area; capacity stands at ~₹450 crores per year, and no major organic capex is foreseen soon.
- Mabel is profitable and capacity-sufficient: Confirmed as 100% profitable with a plant capability of ₹150-200 crores without any further investment; most execution is site-fabricated equipment expected to close in February and March.
- Mabel filled a qualification gap: The company acquired Mabel because it lacked the qualification to make silos and tanks under Engineers India Limited; Mabel specializes in these products.
- Sustainability investment paying forward: Both Gujarat facilities are now rooftop solar-powered, lowering the carbon footprint and improving competitiveness in the European market when CBAM kicks in.
- Dubai sales presence contributing: A deputed sales and marketing head is generating leads from the Middle East and GCC countries.
Working Capital & Balance Sheet
- Working capital is the near-term pressure point: Average working capital stood at ₹367 crores at 2.2 turns, higher than expected due to lower customer advances and higher debtors from long-cycle orders under execution.
- Improvement expected by year-end: Management expects working capital turns to be closer to 3 or a little higher by year-end, with a full recovery to the 3-4 turn target by Q1 of next year, driven by better new order booking and closure of high-value POs.
- U.S. receivables nearly resolved: Of ₹120 crores in total U.S. receivables, only ₹15 crores remained outstanding, with receipt expected in February.
- Interest cost to stay at current levels: Expected to remain at ~1% to 1.1% in Q4.
- Raw material cost management is structured: The pricing model forecasts a 2-3 month window for raw material purchase; PO to raw material placement is 4-6 weeks, with back-to-back vendor arrangements when volatility is high.
- All contracts are fixed-term: Projects are 100% fixed-term contracts; for private customers (60% of business), the PO window is 1-10 days, while tenders (40%) have a 3-4 month gap between quote and PO.
Strategy & Competitive Positioning
- 50-50 export/domestic split is the strategic target: The company has strategized to balance at 50% export and 50% domestic from a risk perspective.
- Strike rate deliberately capped at 20-25%: Management prefers to grow the inquiry pipeline rather than compromise margins for a higher strike rate, calling anything above 25% achievable only by cutting price.
- Order intake run rate stabilizing: Expected order intake on a 3-month block is roughly ₹200-250 crores; the company has already reached that run rate and expects it to hold or improve as conditions improve.
- India-U.S. trade deal seen as a tailwind: A positive development expected to open opportunities and revive discussions for U.S.-bound projects; the current dollar-INR rate also helps competitiveness.
- U.S. inquiry pipeline could add ₹200-300 crores: Management expects the U.S. opening to bring about ₹200-300 crores of strong inquiry position in the next few months.
- Growth strategy for next year rests on short-delivery items: Focus on short-delivery equipment (8-9 months), technical services (1.5-2 months turnaround), and high-volume products (6-7 months completion) to deliver the growth plan.
D'Souza: "It was never with U.S. customers what was that percentage, right? Even at that percentage, we were quite competitive as compared to U.S. fabricators or any other. It was more about uncertainty in terms of what's going to be the tariff at the end of 12 months when we dispatch."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Revenue growth | 15% to 20% | FY26 |
| EBITDA margin | ~22% | FY26 |
| Export share | Over 50% | FY26 |
| Order book | Close FY26 at ~₹600 crores | FY26 end |
| Working capital turns | Closer to 3 or a little higher | FY26 year-end |
| Working capital turns (full recovery) | 3-4 turns | Q1 FY27 |
| Anup Technical Services turnover | ₹200-300 crores | Next 3 years |
| High-volume products turnover | ₹200-300 crores | Next 3 years |
| Conventional business turnover | ~₹1,000 crores | Not dated |
| Services business margin | ~40% | At scale |
| High-volume products margin | ~15% EBITDA | At scale |
| Strike rate ceiling | 20-25% maximum | Ongoing |
| U.S. inquiry pipeline addition | ₹200-300 crores | Next few months |
| Organic growth ambition | Grow much faster than FY26 | FY27 |
Key Metrics
| Metric | Q3 FY26 |
|---|---|
| Consolidated revenue | ₹206.9 cr, +20.3% QoQ |
| Consolidated EBITDA | ₹44.1 cr, +13% QoQ |
| 9M FY26 consolidated revenue | ₹614.4 cr, +20.2% YoY |
| 9M FY26 consolidated EBITDA | ₹135.9 cr, +17.5% YoY |
| 9M FY26 profit before tax | ₹112 cr, +12.2% |
| 9M FY26 profit after tax | ₹85.3 cr (without tax reversals), +2.3% |
| ROCE | 21.2% |
| EBITDA margin guidance | ~22% for FY26, endeavor to maintain 20%-plus going forward |
| Revenue growth guidance | 15% to 20% for FY26 |
| Exports share | 53.4% of revenue, ₹328 cr |
| Pending order book | ₹550 cr as on date |
| Firm inquiry pipeline | ~₹1,100 cr, 60% exports and 40% domestic |
| Average working capital | ₹367 cr, 2.2 turns |
| Other expenses | 24.5% of revenue vs 18% YoY |
| Kheda plant capacity | ~₹450 cr revenue per year based on product mix |
| Anup Technical Services target | ₹200-300 cr in 2-3 years, ~40% margin |