Key Takeaways
- Volume growth roars back: Volume growth surged from 0% in Q1 to ~21% in Q2, driven by aggressive selling, distribution expansion, and new plant contributions.
- Margins held at 20% despite headwinds: EBITDA margin stayed at 20% even as polymer prices swung, the monsoon extended, and government spending stayed low, thanks to a richer product mix.
- New plants are a drag today, a lever tomorrow: Hyderabad and Kanpur plants are running losses at low utilization; management expects operating leverage to kick in as they scale, with Kanpur at full tilt by Q4.
- The paint and UK bets are still burning cash: The paint rollout added depot and employee costs, while the UK adhesive turnaround is a work-in-progress; both are promised to improve materially by fiscal year-end.
- What to watch next quarter: Whether the ADD decision on November 12 triggers a polymer price rally that lifts value growth above volume growth, and if October's strong momentum holds through the construction season.
Volume Recovery & Competitive Playbook
- From stall to sprint: Volume growth jumped to ~21% after a flat Q1, a swing management credits to product mix shifts toward in-demand items, taking the fight to competitors, and expanding the dealer and distribution network.
- New plants as market-share weapons: The Guwahati, Cuttack, Hyderabad, and Kanpur plants are helping the company gain share in geographies where its presence was previously thin, adding incremental volume that existing facilities could not capture.
- Channel still cautious: Inventory levels at dealers remain subdued because PVC price volatility has shaken their confidence to stock up, a fragility that could cap the pace of further volume acceleration if prices stay unpredictable.
- October momentum: Management noted October was a very good month, suggesting the Q2 exit rate was strong and setting up the seasonally stronger H2.
Sandeep Engineer: "we had been openly discussing on all these fronts also in our past calls"
Margin Mechanics & Cost Structure
- The 20% floor held: EBITDA margin was maintained at 20% despite a tough cost environment: volatile polymer prices, an extended monsoon that delayed construction activity, and low government spending. A richer mix of value-added products provided the cushion.
- New plant losses are a near-term bleed: Hyderabad and Kanpur plants are currently loss-making because management staffed them and began incurring costs before commercial production ramped up, inflating employee and other expenses over recent quarters.
- Cost savings are in motion but opaque: Management took serious measures on manpower and expenses 2-3 quarters ago, but declined to detail them publicly, saying only that some will take more quarters to fully reflect in cost reduction.
- The metric debate: When pressed on flat EBITDA per kg YoY and whether it signals price aggression eating into margins, management deflected, insisting percentage EBITDA is the correct lens because product mix shifts every quarter.
Hiranand Savlani: "it is not that we are going to sell at any price that is not the mindset of the management. We want to maintain our profitability at the same time wherever we are getting the cost advantages we are passing on to the market"
New Business Bets: Paint, UK & Bathware
- Paint is building infrastructure at a cost: The paint business opened 9 depots across Gujarat, Rajasthan, and Maharashtra, which pushed up employee and other costs and pressured margins. Management remains confident of hitting 20% full-year growth guidance and expects substantial topline and margin improvement by the end of this fiscal and into next year.
- UK adhesives: a turnaround in progress: A new CEO with 25+ years of segment experience has been installed from India, and the company completed its buyout of the remaining 5% stake to make it a 100% subsidiary. Substantial improvement in both sales growth and EBITDA margin is expected by March, with double-digit EBITDA margin targeted next year.
- Bathware riding the construction cycle: With a low base and post-monsoon construction activity picking up, management is positive on growth in coming quarters.
- Adhesives India: a steady compounder: Management expressed confidence in continuing a 15% growth run rate and a 15%-16% EBITDA margin run rate in coming fiscals.
Capacity Expansion & Capex Timeline
- Kanpur: the next margin lever: The plant has started operations and is gearing up; Q3 will be used for inventory build-up, with full-scale, good results expected by Q4 of this fiscal year. As utilization rises, operating leverage and lower logistic costs should support margins.
- Hyderabad: ramping gradually: The plant has started and is picking up volumes, with further increases expected in coming months.
- CPVC plant: a FY27 story: Design work is nearly complete, construction and machinery ordering begins next month, and installation and construction are slated to finish by September 2026.
- New product lines incoming: OPVC machines are arriving at different locations, corrugated pipe machines are being added, and an aluminum PEX machine, a new product line, is expected by next quarter.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Plumbing volume growth | Double-digit growth; pace continues even without ADD | Ongoing |
| Kanpur plant at full scale | Full-scale, good results | Q4 FY26 |
| CPVC plant completion | Construction and machinery installation finished | September 2026 |
| UK adhesives turnaround | Substantial improvement in sales growth and EBITDA margin; double-digit EBITDA margin | By March 2026 / next year |
| Paint business improvement | Substantial improvement in topline growth and margins | By end of this fiscal and next year |
| Value/volume growth convergence | Volume and value growth rates to be more or less same | 1-2 quarters |
| ADD catalyst | If ADD imposed by Nov 12, polymer prices rise, value growth exceeds volume growth, margins improve | November 12, 2025 |
| Adhesives India growth | 15% growth run rate, 15%-16% EBITDA margin run rate | Coming fiscals |
Key Metrics
| Metric | Q2 FY26 |
|---|---|
| Consolidated volume growth | 20% YoY |
| Consolidated value growth | 15% YoY |
| Consolidated EBITDA growth | 20% YoY |
| Plumbing segment revenue growth | 15.75% YoY |
| Adhesive India revenue growth | 15.83% YoY |
| Adhesive UK revenue growth | 5.22% YoY |
| Paint revenue growth | 17.08% YoY |
| Bathware revenue growth | 13.84% YoY |
| Adhesive India EBITDA margin | 15% to 16% range, stable |
| Adhesive UK EBITDA margin | 7.33%, improved from -2% in prior periods |
| Paint H1 FY26 revenue growth | 19% YoY |
| Paint full-year FY26 revenue growth guidance | 20% |
| Bathware H1 FY26 revenue growth | 20% YoY |
| Bathware medium-term growth target | 20% to 25% for next 5 years |
| H1 FY26 CAPEX incurred | ₹282 cr |
| Full-year FY26 CAPEX guidance | ₹300 cr to ₹350 cr, unchanged |
| Total CAPEX spent in last 4 years | ₹1,400 cr across all verticals |
| Total pipe capacity as of Sep 30, 2025 | 3,89,000 MT, excluding Kanpur's 15,400 MT added in October |
| Hyderabad plant utilization | ~15% to 20% |
| Q2 FY26 Adhesive India revenue | ₹305 cr |
| Q2 FY26 Adhesive UK revenue | ₹97 cr |
| Q2 FY26 Paint revenue | ₹57 cr |
| H1 FY26 Adhesive India revenue | ₹566 cr |
| H1 FY26 Adhesive UK revenue | ₹192 cr |
| H1 FY26 Paint revenue | ₹107 cr |
| Bathware CAPEX spent to date | ~₹25.5 cr to ₹30 cr |
| CPVC plant commissioning timeline | September 2026 |
| Paint FY27 EBITDA margin expectation | Single digit |