Key Takeaways
- Volume-led beat, margin mix drag: Plumbing volume grew 19.1% YoY as market share gains and low channel inventory combined with strong demand, but a PVC-heavy mix and lagged price pass-through compressed Q2 margins.
- Adhesives and paint are growing fast but margin-poor: Adhesives India grew 25.3% and paint 39.9%, yet both missed guided profitability because crude volatility delayed raw material pass-through and paint is still absorbing start-up overheads.
- The H2 margin recovery is priced in: Management expects most cost inflation to pass through in Q3, a richer CPVC mix in H2, and October already showed sizable EBITDA improvement, so the full-year plumbing EBITDA call of ₹1,050 crore rests on that materializing.
- Backward integration and new products are arriving on schedule: The CPVC plant commissions in Q4, PEX and PPR lines start commercial sales in Q3, and existing land and buildings can add 100 KT of capacity in 6–9 months with low incremental capex.
- What to watch next quarter: Whether the October demand surge sustains, whether adhesives and paint margins visibly inflect toward guided levels, and whether Q3 realization crosses ₹200 as promised.
Plumbing: The Volume Engine and the Mix Penalty
- Volume growth was exceptional: Q2 volume grew 19.1% and H1 10.1%, driven by broad-based demand, low dealer inventory after a negative Q1 for the pipe industry, and market share gains in new geographies where plants were recently commissioned.
- Revenue followed volume: Plumbing revenue grew 25% YoY in Q2 and 18% in H1, aided by plant decentralization and distribution expansion into new geographies.
- The margin penalty was a product-mix story: Q2 is seasonally PVC-heavy because CPVC is less favorable in that quarter, and a September scheme to drive volume was taken up more on pipes than fittings, so CPVC fitting sales shifted into October and depressed the Q2 mix.
- H2 seasonality is a structural tailwind: H2 historically delivers 60% of full-year plumbing EBITDA because it is loaded with higher-margin CPVC and value-added products; last year H1 contributed ₹369 crore and H2 ₹547 crore.
- October already flipped the script: Unprecedented demand made it the best October in Astral's history for plumbing, and fitting sales missed in September materialized in October, improving the mix.
- Realization is set to rise: Q2 realization was roughly ₹190; Q3 is expected above ₹200, which will further absorb fixed overheads.
- Full-year volume target: Management is targeting 290,000–300,000 tons and working for more than 10–12% growth, though it declined to specify an exact number.
Sandeep Engineer: "I think we are targeting not that 10, 11, 12, but we'll be working for more. But we don't want to specify the number, but looking to the product lines, the reach, the new plants, the geography addition, the distribution addition, because we are adding multiple distributors also, we feel that there is a robust growth going to come in these 2 quarters."
Adhesives: Strong Growth, Lagged Margin Recovery
- Top-line momentum is broad-based: India adhesives grew 25.3% in Q2 and 25% in H1, driven by good response in rural and online channels across all product lines; UK adhesives grew 30.1% in Q2 and 28.1% in H1 after corrections took hold.
- Growth is volume-led and share-driven: The 25% revenue growth is a mix of market demand and market share gains in previously weak geographies where distribution networks are being expanded; value growth is matching volume growth percentages.
- Margins are the pain point: India adhesives H1 EBITDA was 11.5% against a 14–15% guidance, because industry-wide pass-through of raw material costs is happening with a lag and crude volatility touching $115–120 caused wide fluctuations.
- UK is improving but not yet at target: UK Q2 EBITDA was 6.3%, moving toward a 9–10% target; the same pass-through lag exists but the business is now on the positive side of EBITDA after corrections.
- Normalization is expected when crude settles: Once crude stabilizes, pass-through will complete and India margins should return to 14–15%; full-year India EBITDA is now expected closer to 13–14%, with management working to reach around 14% by year-end.
- Growth guidance upgraded: Management will try to maintain the Q1–Q2 top-line run rate, with margins gradually improving in Q3 and Q4.
Hiranand Savlani: "If somewhere it will settle down, I don't know what level it will settle down, maybe 190 or 85, I don't know, but it is somewhere it will settle down and then I think the pass-through will take place fully and then the margin will be coming back to the normalcy of 14-15% kind of level."
Paint: Fast Growth, Legacy Clean-Up Done, Margin Inflection Ahead
- Growth is explosive off a low base: Paint revenue grew 43.9% in Q2 and 51% in H1, with all six operative states delivering excellent growth.
- Margins are still negative: Pressure continued because most chemicals are crude derivatives and crude prices stayed elevated; Q1 was at breakeven before cost inflation hit.
- Legacy issues are fully resolved: All problems inherited from the JEM acquisition are behind the company: the collection cycle improved from 4–5 months to 60 days, there are no bad debts, and the direct-to-dealer model is functioning.
- No new geographies until existing ones stabilize: Management will not open additional states until the current six states deliver EBITDA around 9–10%.
- The margin ramp is promised to be steep: Year-end positive EBITDA of 3–4% is targeted, with 8–10% next year; margin improvement will be pursued "very severely" in this and the coming quarter.
- Volume growth run rate of 40–50% is the near-term target, with next-year growth expected around 25%; economies of scale will then provide extra margin.
Sandeep Engineer: "I'd like to tell everyone very clearly that we have come out of all the legacy issues which we got from the JEM. Our collection cycle is excellent. We are direct-to-dealer. We are getting no bad debts now."
Margin Walk and the H2 Recovery Thesis
- Q2 plumbing EBITDA margin was 16.3%, while H1 stood at 17.4%, well within the 16–18% guided zone.
- The Q2 compression was a timing issue, not a structural one: A PVC-heavy mix, a September scheme that pulled pipe volume at the expense of higher-margin CPVC fittings, and lagged price pass-through combined to depress the quarter.
- Price pass-through is now largely complete: A 5% CPVC price hike was taken in October, all PVC price rises have been covered, and a substantial polymer price rise passed through in September took effect in October, producing a sizable EBITDA improvement.
- Overhead absorption is turning favorable: Value growth is now exceeding volume growth for the first time in three years, which helps absorb fixed overheads faster; H1 OpEx was still up 19–20% but top-line grew 26%, and management expects the operating cost percentage to keep falling quarter-on-quarter.
- Q3 will be a good margin quarter: Most price rises are already passed through, the product mix is more favorable in Q3 and Q4, and Q3 realization is expected above ₹200 versus roughly ₹190 in Q2.
- Full-year plumbing EBITDA is projected at close to ₹1,050 crore, with consolidated EBITDA at ₹1,250 crore (plumbing ₹1,050 crore plus chemicals, adhesives and paint contributing ₹200+ crore).
Hiranand Savlani: "We are expecting the similar kind of growth, so we will be easily doing close to about Rs 1,050 crore kind of EBITDA in the full year basis."
Capacity, Backward Integration and New Products
- The CPVC plant is nearly ready: Construction is almost complete, machinery installation is ongoing, trials are expected to finish in the first month of Q4, and commercial production of PC PVC will begin by the last month of Q4; ramp-up to full capacity utilization is expected in maximum one quarter.
- New product lines are launching now: PEX aluminum PEX machines are installed, stabilized, and starting commercial production in Q3; a complete PPR pipes and fittings range has been launched; an electrofusion HDP drainage system will be launched very shortly.
- Capacity can be added fast and cheaply: Land is already acquired and buildings are built for all businesses, sufficient for the next 2–3 years of growth and even tripling capacities; an additional 100 KT can be added in 6–9 months with lower incremental capex since 60–70% of cost (land and building) is already incurred.
- DSS is a small but strategic addition: The newly acquired specialty chemicals company generated ₹5.3 crore revenue and ₹0.8 crore EBITDA in Q2; a running plant next door is being acquired at very effective cost, and new products will replace imports used in Astral's adhesive and paint businesses while also being sold domestically and exported.
- Future capex will be at the lower end since land and buildings are already in place; only machinery additions remain.
Kairav Engineer: "In short, I can say that we have enough land and building available that if you want to add another 100 KT, we can do it in a matter of, you know, 6 to 9 months."
Industry Backdrop and Competitive Position
- MIP is a structural downside protection: A Minimum Import Price has been implemented for the polymer industry, with a minimum base price of ₹85–90 that protects the downside; a countervailing duty is also on the card with provisional steps issued by the government.
- Market share gains are continuous and CapEx-backed: Astral has been gaining market share for many years, supported by capex spent over the last 4–5 years across all verticals that is now being utilized.
- Low-base products are contributing with healthy margins: Water tanks, valves, fire sprinklers, OPVC, PTMT, and low-noise pipe segments are all delivering good performance.
- The industry environment is very positive across all verticals, and management is highly confident the second half will deliver much better numbers than the first half.
- Inventory days appear elevated on a point-in-time basis due to an inflationary environment and higher-cost material, but average holding is 55–60 days; payable days declined because management reduced dollar-related liabilities amid the war situation, paying early to take discounts and avoid FX losses, with no FX loss in H1.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Plumbing volume | 290,000–300,000 tons; working for more than 10–12% growth | FY27 full year |
| Plumbing EBITDA | Close to ₹1,050 crore | FY27 full year |
| Plumbing EBITDA margin | 16–18% (H1 at 17.4%, within zone) | FY27 full year |
| Consolidated EBITDA | ₹1,250 crore (plumbing ₹1,050 crore + chemical/adhesive/paint ₹200+ crore) | FY27 full year |
| India adhesives EBITDA margin | 13–14%, working toward ~14% (vs original 14–15% guidance) | FY27 year-end |
| UK adhesives EBITDA margin | 9–10% | FY27 year-end |
| Paint EBITDA margin | Positive 3–4% | FY27 year-end |
| Paint EBITDA margin | 8–10% | FY28 |
| Paint volume growth run rate | 40–50% | Near term |
| CPVC plant commercial production | PC PVC production start | Last month of Q4 FY27 |
| CPVC plant ramp-up | Full capacity utilization | Maximum 1 quarter post-commissioning |
| PEX aluminum PEX commercial sales | From own plant | Q3 FY27 |
| Capacity addition | 100 KT incremental | 6–9 months from decision |
| Capex (excl. Nexlon CPVC plant ₹40 crore) | ₹300–350 crore | FY27 year-end |
| Gem Paints Bangalore asset sale proceeds | ₹51–52 crore | Completed |
Key Metrics
| Metric | Q2 FY27 |
|---|---|
| Consolidated revenue | ₹1,988 cr, +26% YoY |
| H1 consolidated revenue | ₹3,566 cr, +21.4% YoY |
| Consolidated EBITDA | ₹272 cr, margin 13.7% |
| H1 consolidated EBITDA | ₹516 cr, margin 14.5% |
| Plumbing revenue | ₹1,398 cr, +25% YoY |
| Plumbing EBITDA margin | 16.3% (Q2), 17.4% (H1); H1 within guided 16–18% range |
| Plumbing volume growth | 19.10% YoY (Q2), 10.1% (H1) |
| Full-year plumbing EBITDA projection | ~₹1,050 cr, management estimate |
| Full-year consolidated EBITDA projection | ~₹1,250 cr, management estimate |
| Full-year plumbing volume target | 290,000–300,000 tons |
| Adhesive India revenue | ₹382 cr, +25.3% YoY |
| Adhesive India EBITDA margin | 11% (Q2), 11.5% (H1); full-year expected closer to 13–14% |
| Adhesive UK revenue | ₹126 cr, +30.1% YoY |
| Adhesive UK EBITDA margin | 6.3% (Q2), 5.6% (H1); year-end target 9–10% |
| Paint revenue | ₹82 cr, +39.9% YoY |
| Paint EBITDA | negative ₹4 cr, margin roughly negative 5% |
| Paint full-year EBITDA guidance | lower single-digit positive; year-end expected 3–4% |
| DSS (specialty) revenue | ₹5.3 cr, EBITDA ₹0.8 cr |
| H1 CapEx | ₹260 cr (excluding goodwill; Nexlon CPVC plant of ₹40 cr is included in this ₹260 cr) |
| CPVC price hike (October) | 5% |
| Plastic plumbing capacity | 425 KTA |