Key Takeaways
- Volume held up better than the market: Revenue fell 15% YoY, but Automotive Axles’ volumes declined only 12% vs the industry’s -13% and Ashok Leyland’s -22%, cushioned by a one-off aftermarket backlog clearance and brake-side upsides.
- Margins proved resilient on lower volumes: EBITDA margin dipped just 50 bps YoY to 11.4% in Q2, while H1 margins actually improved to 11.6% from 11.2%, as better shop-floor operating performance partly offset fixed-cost under-absorption.
- The product pipeline is reloading: The new MS 185 axle began ramping up at Ashok Leyland, a bus axle is slated for mid-next year, and a 177 axle for 13.5/15-meter coaches entered early discussion, all aimed at pushing Ashok Leyland share past 65%.
- A promoter’s acquisition of a competitor raised governance questions: Bharat Forge (a promoter) bid for American Axle India without Automotive Axles’ involvement; management declined to comment, citing an incomplete transaction and equal-promoter governance with Cummins.
- What to watch next quarter: Whether the Q3 M&HCV market lands in the 90,000–95,000 unit forecast, the pace of MS 185 axle offtake, and any further clarity on the American Axle transaction.
Demand & Market Structure
- M&HCV softness persisted through Q2: The market weakened after the general election and monsoon, though management noted some retail uptick in recent days and expects Q3 at 90,000–95,000 units and Q4 at ~100,000+ units, similar to last year.
- Full-year market seen down ~5%: Election-year dynamics and infrastructure spend impact are the cited drivers; FY26 is conservatively expected flat, with a 10% upside possible.
- A structural tonnage shift is underway: Engine horsepower is migrating from the lower-200/mid-250 range to 300/350, raising goods-carrying capacity; the 2018 volume of 476,000 vehicles catered 860 crore metric tons, while today’s 380,000–390,000 market handles the same tonnage, suggesting tonnage has stabilized even as unit counts fell.
- Second-half volumes seen similar to the first half: A possible 5–10% upside hinges on market conditions and OEM inventory levels.
Kishan Kumar: "Some people believe this is not a degrowth. This is probably a shift in the overall market analytics, more closer to the western world."
Competitive Positioning & Outperformance
- Volume decline was shallower than key customers’: Automotive Axles’ 12% drop compared with Ashok Leyland’s 22% decline, driven by aftermarket backlog clearance from the prior quarter and brake-side gains.
- Aftermarket provided a one-off cushion: The benefit this quarter was a backlog carried over from last quarter and completed in Q2; management characterized it as non-recurring.
- Exports have grown ~25% vs FY22 levels: The increase is marginal quarter-on-quarter, with a good rise in aftermarket order backlog; management focuses on intra-company export of global products like the 177 and 185 rather than adding direct OEM customers abroad.
- Downcycle protection is qualitative, not quantified: Management said it will try to minimize the impact of a CV downcycle but could not dimension whether the downside would be less than or more than 10% relative to a 20% market fall.
Nagaraja Gargeshwari: "We will definitely try our level best to be better than our peers. But again, it's very difficult to kind of dimension it because there are different product segments and different OE shares, how it gets affected."
Product Pipeline & Share Gains
- MS 185 axle ramp-up is underway: The new axle launched to Ashok Leyland; SOP started and production ramped up well, forming one leg of the push toward 65%+ share.
- Bus axle targets a mid-next-year launch: Development was reprioritized after BS-4 to BS-6 upgrades consumed engineering bandwidth on high-volume M&HCV products; the new bus products are expected to add 2–3% penetration into Ashok Leyland and reduce product-mix impact.
- 177 axle in very early discussion: Targeted at 13.5- and 15-meter coaches, with no timeline yet.
- 394 brake opens the ICV sweet spot: The newly launched brake addresses a segment where the company was previously absent.
- Three products now cover the 7-to-14-ton segment: The smallest axle supplied to Ashok Leyland has grown volumes over three years, alongside the 11x and 120 products, some launched or upgraded in the last 3–5 years.
- EV-specific brake development is in progress: Work is underway globally and in India on brake modifications for EVs, particularly for the electric bus market, leveraging global data on how EV architecture and regenerative motor capabilities alter brake requirements.
Kishan Kumar: "Our current share is around 63% to 65% depending on the product mix. Typically, that is where we range. And with the new products that we are planning to launch in a couple of months, we should be 65% plus, that is what we are aiming for."
Margins & Operating Leverage
- EBITDA margin held nearly flat despite the revenue drop: Q2 EBITDA margin was 11.4% vs 11.9% YoY; the 15% sales decline was partly absorbed by better operating performance, with the residual impact coming from fixed-cost under-absorption on lower volumes.
- H1 margins actually improved: EBITDA margin rose to 11.6% in H1 FY25 from 11.2% in H1 FY24, even on lower revenue.
- Management pointed to a much stronger shop floor vs 2018–19: Operating performance improvements over the cycle mean the company is in a better position to defend margins when volumes fall.
- A 450,000-unit market would lift EBITDA 20–25%: Management estimated that if the M&HCV market reaches that level, EBITDA would be at least 20–25% better than current levels, though no timeline was attached.
- No EBITDA margin guidance was given: Management declined to paint a picture of sustainable margins or provide ballpark revenue growth over three years, offering only qualitative outlook.
Ranganathan S: "if it touches 450,000 vehicle levels, I think our EBITDA will be at least 20% better than or 25% better than what we are doing."
Bharat Forge & American Axle Acquisition
- Bharat Forge bid for American Axle India without Automotive Axles’ participation: An analyst noted the target grew ~50% (₹900 cr to ₹1,400 cr) and asked why Automotive Axles did not bid; management said the bid was not offered to them, they have no details beyond public information, and the transaction is not complete.
- Governance concerns were raised and deflected: An analyst pressed that a promoter acquiring a competitor without Automotive Axles’ awareness raises governance issues; management reiterated the transaction is incomplete and governance will follow legal requirements with two equal promoters, BFL and Cummins.
- No details on business overlap were provided: Management said it cannot know American Axle’s segment breakdown (LCV vs M&HCV) or the percentage of overlapping business, noting only that Daimler is a major customer per public information.
Nagaraja Gargeshwari: "We have two equal promoters or partners. One is BFL. Another one is Cummins. Cummins is also in automotive. So, as far as governance is concerned, you can be very, very sure of that. Everything will be done as per the legal requirement."
Capital Allocation & Capacity
- ₹200 cr CAPEX approved over 2–3 years: The board approved ~₹70 cr for phase 1, with completion by end of next calendar year; phases 2 and 3 will follow, timed with market conditions.
- Investment is for upgrading existing lines: The ₹200 cr is earmarked for plant upgrades with new machines and automation over the next 3–5 years, not fresh greenfield capacity.
- ROCE improvement is volume-dependent: Management indicated ROCE can improve to 24–25% as volume grows, but declined to share the ROCE delta between the axles and brakes businesses, calling it internal.
- No per-unit CAPEX guidance: Management said it is very difficult to give a single ballpark number for axle or brake capacity cost after 40 years of cumulative investment, as it depends on technology.
Ranganathan S: "We would like to make sure that we time the investment properly. Our expectation is we should be investing close to about Rs. 200 crores in next 2-3 years' time."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Q3 M&HCV market volume | 90,000 to 95,000 units | Q3 FY25 |
| Q4 M&HCV market volume | ~100,000+ units, similar to last year | Q4 FY25 |
| Full-year FY25 market | Down ~5% vs last year | FY25 |
| H2 FY25 company volume | Similar to H1; possible 5–10% upside depending on market and OEM inventory | H2 FY25 |
| FY26 market outlook | Conservatively flat; 10% upside possible | FY26 |
| Ashok Leyland share | 65%+ with new products (MS 185, bus axle, 177) | After product launches over coming months |
| Bus axle launch | Mid-next year (Q2 FY26) | Q2 FY26 |
| CAPEX phase 1 | ~₹70 cr, completion by end of next calendar year | End of CY2026 |
| Total CAPEX | ~₹200 cr over next 2–3 years, timed with market | 2–3 years |
| Bus segment penetration | Add 2–3% penetration into Ashok Leyland | After bus axle launch |
| EBITDA leverage trigger | At least 20–25% better than current levels if market reaches 450,000 vehicles | Conditional on market volume |
Key Metrics
| Metric | Q2 FY25 |
|---|---|
| Revenue | ₹500+ cr, down 15% YoY from ₹588 cr in Q2 FY24 |
| H1 FY25 revenue | ~₹1,000 cr, down ~11% YoY from ₹1,022 cr in H1 FY24 |
| EBITDA margin | 11.4%, vs 11.9% in Q2 FY24 |
| H1 FY25 EBITDA margin | 11.6%, vs 11.2% in H1 FY24 |
| PBIT margin | 9.7%, vs 10.3% in Q2 FY24 |
| ROCE | ~21%, can improve to 24-25% as volume grows |
| M&HCV industry volume forecast (Q3 FY25) | 90,000 to 95,000 units |
| M&HCV industry volume forecast (Q4 FY25) | ~100,000+ units, similar to last year |
| Full-year M&HCV market outlook | Down ~5% vs last year |
| Ashok Leyland share of business | 63% to 65%, depending on product mix |
| Aftermarket share of sales | Close to double digit percentage |
| Exports share of sales | Close to double digit percentage |
| Exports growth vs FY22 | ~25% growth compared to 2021-22 |
| Brakes share of overall volumes | 10% to 15% |
| Brakes market share | ~40%, grown from 30% over last 3-4 years |
| Board-approved CAPEX | ~₹70 cr, completion expected by end of next calendar year |
| Expected total CAPEX (next 2-3 years) | ~₹200 cr |