Key Takeaways
- Record EPS on a sub-peak market: FY23 revenue grew ~56% to ₹2,328 Cr, surpassing the FY19 peak even though M&HCV production stayed ~15% below that level, driven by content-per-vehicle gains and new product penetration.
- Margins expanded sharply YoY: Full-year EBITDA margin rose to 11.3% from 9.3%, and PBT margin to 9.4% from 6.7%, with absolute PBT up 118%, as cost initiatives and value engineering offset conversion-cost inflation.
- Cummins-Meritor integration is now complete: All regional approvals, including India’s CPA clearance, are in hand, and management is actively working on local OEM synergies and positioning India as a best-cost-country sourcing hub.
- The sub-6-tonne LCV entry is on hold: Management is “holding it back” while it evaluates the investment case, citing faster expected electrification and new-fuel adoption in LCVs and buses.
- What to watch next quarter: Whether the conservative 5–8% FY24 industry growth forecast proves too low, the pace of new-customer penetration for the 185 axle, and any quantified synergy wins from the Cummins integration.
Revenue Growth & Content Story
- Revenue vs market disconnect: FY23 revenue grew ~50% YoY against industry growth of ~24–25%, because of higher content per vehicle, new products, market-share gains, and growth in export and off-highway segments.
- Content-per-vehicle shift: Realization per axle has risen substantially as customers move to larger axles (e.g., the 185 for 59-tonne vehicles vs the earlier 49-tonne), axle-load norm changes, and BSVI model upgrades, so the same unit count now yields higher revenue.
- Growth was broad-based: Every segment contributed: on-highway axles, off-highway axles, brakes, and exports all grew, with the brake business expanding through value-engineered products (394) and entry into the ICV segment (360) where the company previously had no product.
- Seven new products launched: FY23 introductions included the India-specific, patented MS185 and 160EO, the 59 ATBGS (16 mm housing for heavy-duty mining/tipper applications), and dia 360/394 brakes, all supporting market-share gains and lower total cost of ownership for customers.
- Post-COVID responsiveness: Faster response time to customers versus competition when demand returned after COVID enabled market-penetration gains.
Nagaraja: “MS185 it replaces a tandem axle but it still does meet the durability requirement and application requirement of the customers for a 55 tonne tractors or even for the 10 x 2 loader tipper.”
Margins & Cost Management
- Absolute EBITDA grew despite muted percentage: Commodity costs pass through revenue without adding margin, so the EBITDA percentage understates the improvement; absolute EBITDA has grown substantially, and cost initiatives compensated for the commodity drag.
- Conversion-cost inflation was absorbed: Conversion costs rose 25–30% (petroleum, tools, carbide, Ukraine war), but the team mitigated the impact through a half-cost approach and sustainability initiatives.
- Q4 margin detail: Q4 EBITDA was 11.4% and PBT 9.8% vs 9.3% in the same quarter last year; three of four commodities were accounted in the quarter, and a one-time extended-warranty provision agreed with customers was booked, which kept the sequential margin nearly flat despite 6% revenue growth.
- Renewable-energy migration: The furnace fuel switch from LPG to LNG and electrification of preheating and other processes are on track toward the 80% renewable-energy consumption goal, with management securing what it believes is one of the best available prices, helping contain conversion cost.
- Internal margin aspiration is “much, much higher”: Both Cummins and Kalyani exert pressure to expand margins while growing; management will not compromise growth for profitability or vice versa, and expects to reach its aspiration “within one or two years” through product innovation, cost reduction, and total-cost-of-ownership expansion.
Muthukumar N: “We will never compromise on growth for profitability or profitability for the growth.”
Cummins-Meritor Integration & Synergies
- Integration is complete: Cummins’ acquisition of Meritor has closed across all regions, including India, where CPA approvals have been received.
- Local OEM synergies: Cummins’ strong relationships with OEMs where Meritor is not present complement Meritor’s existing relationship with Ashok Leyland, creating cross-sell opportunities in India.
- India as a best-cost-country sourcing hub: Cummins is expected to accelerate and catalyze global sourcing from India, with additional synergies in safety, diversity, sourcing, supply chain, and manufacturing practices; by 2032, as India’s economy grows, more manufacturing is expected to shift to India.
- Off-highway and military opportunities: The company is working closely with Cummins to penetrate off-highway customers and evaluating how to accelerate penetration using Cummins’ expertise; military is also flagged as an opportunity.
- Full-axle exports face practical limits: Exporting a complete axle vs a subsystem depends on lead time, local-content pressure in the US, and geopolitics; Cummins will not stop US manufacturing to buy from India where it is uneconomical.
Muthukumar N: “…we will continue to work on to see that how we can synergize this Cummins integration and try to make the company from good to great.”
Product & Market-Share Levers
- 185 axle gaining traction: More than 3,000 vehicles are already in the market with this product, and volume is growing; the axle is applicable across tractors and 10x2 tippers, reduces total cost of ownership without compromising durability, and is one of the most popular axles in China.
- OEM penetration challenge: The largest OEMs have invested in captive axle manufacturing, making penetration difficult, but innovation is expected to substantially improve the chance that OEMs will come to the company; some OEMs that make their own axles still buy premium and unique products, and for exports all OEMs (Daimler, Volvo, Tata) buy from the company.
- Brake ambition: The stated goal is to become the number-one brake manufacturer and supplier in addition to being the number-one independent axle manufacturer.
- 10x and 11x products: Originally for truck applications, these have been applied to minibus applications and are being used by customers in Asia-Pacific and Middle East markets.
- Long-term agreements: More than 70% of business by number or value is now under RLT agreements running up to at most the next two years, covering both renewals and new contracts.
End-Market Outlook & Cycle View
- FY24 industry growth forecast: Management is guiding to 5–8% M&HCV market growth, calling it “a little bit of conservative” with high potential; April’s start indicates the market is “definitely going to be good,” but uncertainties remain around the real-time emissions system coming in and OEM conservatism.
- CV upcycle sustainability: Management strongly believes the upcycle will stay for some time because the market has been slowly absorbing a series of shocks since FY18 (loan availability, axle-load rating changes, BSVI, COVID, second wave) and the recovery is sustainable, supported by infrastructure spending, axle-load rating improvements, and GDP growth.
- Lead indicators are positive: Truck rentals remain very strong, which is a lead indicator for the CV segment; infrastructure development and improved roads have substantially increased existing truck utilization, driving tonnage movement and truck requirements.
- Tipper demand: Infrastructure spending is predominantly driving the tipper segment.
- Export markets: The US market continues to be strong with a good order book; Europe is seen as flat; a lot of global supplies are coming to India, supporting market strength.
Muthukumar N: “I strongly believe that the various initiatives there and it is going to stay for a little time because the market has been very, very slowly observing various shocks and it is sustainable.”
Capital Allocation & Strategic Choices
- Sub-6-tonne entry held back: While the company continues to work on the platform, it is evaluating the investment credentials and holding back for now, given that electrification and new-fuel adoption are expected to come faster in LCV and bus segments than in HCV.
- FY24 capex is maintenance-level: No substantial investment on capacity is planned; sustainable capex will continue for operational excellence, Industry 4.0, and digitization; new capex will be evaluated only as new business requirements mature.
- Beyond-2025 planning underway: The team is already working on how to expand and grow beyond 2025 and what initiatives are needed.
- Packaging sustainability: The company has switched to fully returnable metal containers with one key export customer, eliminating wood; 90% of supplies now use returnable containers or no wood, with a target of 100% wood elimination by 2028.
Muthukumar N: “while we continue to work on the platform going sub 6 tonnes at this point of time, we are evaluating the credentials of investment at this point of time and holding it back.”
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Industry growth outlook | M&HCV market to grow 5–8% | FY24 |
| Company growth vs market | Outgrow the market; team ready to deliver if market goes higher | FY24 |
| EBITDA margin aspiration | Reach internal aspiration (described as “much, much higher” than current) | “Within one or two years” |
| No substantial capacity capex | Only sustainable capex for operational excellence, Industry 4.0, digitization | FY24 |
| Renewable energy | Achieve 80% consumption through renewable sources | On track (no date given) |
| Wood-free packaging | Eliminate 100% of wood for packaging | By 2028 |
| Sub-6-tonne segment entry | Evaluating investment credentials; holding back | No timeline; conditional on electrification/new-fuel adoption outlook |
Key Metrics
| Metric | Q4 FY23 |
|---|---|
| Revenue | ₹694 cr, +26% YoY |
| EBITDA margin | 11.4%, vs 9.3% in Q4 FY22 |
| PBT margin | 9.8%, vs 9.3% in Q4 FY22 |
| Full-year FY23 revenue | ₹2,328 cr, +56% YoY |
| Full-year FY23 EBITDA margin | 11.3%, vs 9.3% in FY22 |
| Full-year FY23 PBT margin | 9.4%, vs 6.7% in FY22 |
| Full-year FY23 PBT growth | 118% YoY |
| Full-year FY23 EPS | Highest in company history |
| M&HCV industry production (FY23) | ~407,000 vehicles, lower than FY19 peak |
| M&HCV industry growth guidance (FY24) | 5% to 8%, conservative estimate |
| Revenue growth vs market (FY22 to FY23) | 50% revenue growth vs ~24–25% market growth |
| Revenue vs FY19 peak | 20% higher than FY19, while market was 15% lower |
| New products launched (FY23) | 7 products, including MS185 and 160EO |
| MS185 axle units in market | More than 3,000 vehicles |
| Long-term agreement coverage | More than 70% of business by value or volume, covering up to next two years |
| Renewable energy target | 80% of consumption through renewable sources |
| Wood-free packaging target | 90% of supplies currently wood-free; 100% target by 2028 |
| Manufacturing sites | 4 sites |
| Employees | More than 2,000 |
| Market capitalization rank | 566th among top 1,000 companies, market cap of ₹3.57 lakh cr (per an analyst's math) |