Key Takeaways
- Best year, seventh straight growth quarter: FY26 revenue grew 46%, beating the 40% guidance, and Q4 marked the seventh consecutive quarter of growth, described as profitable, broad-based and consistent.
- Tariff pass-through optically compressed gross margin: Substantially all tariff impact was passed to customers, protecting absolute gross profit, but the pass-through mechanically lowered the gross margin percentage by ~110 bps.
- U.S. losses narrowed, breakeven in sight: U.S. manufacturing losses shrank from ~₹14 cr quarterly to ~₹5 cr in Q4, with breakeven expected in the later part of FY27 as new programs ramp.
- New doubling target set from a higher base: Management committed to doubling revenue from the FY26 base of ₹1,603 cr to ~₹3,200 cr in FY29, after running nearly a year ahead of the prior doubling schedule.
- What to watch next quarter: Whether the semiconductor equipment program enters volume production, the pace of U.S. loss reduction toward breakeven, and any new program wins from the tariff-driven supply-chain diversification.
Revenue Growth & Composition
- Broad-based growth across verticals: Industrial grew 65% YoY, Mobility 50%, Clean Energy 45%, and Communications 58%, with all key metrics (revenue, profitability, working capital, ROCE) improving.
- Existing programs dominate the base: Of the ~₹500 cr revenue addition, ~70% came from existing programs and ~30% from new programs and customers onboarded 1.5 to 2 years ago, reflecting long product life cycles and mission-critical recurring revenues.
- Box build mix deepening: Box build rose from 44% to 56% of revenue over four years, indicating deeper customer integration and stickiness; management aims to continue this trajectory, starting with a commodity and moving to full box build over 2 to 3 years with each customer.
- Box build margins are higher but unquantified: Box build carries higher margins than traditional PCB assembly because it is vertically integrated, but management declined to quantify the differential, saying it depends on industry, vertical and commodity.
- No quarterly guidance given: Management declined to provide quarterly revenue trajectory or cadence, requesting investors look from a 3-year perspective and noting that large programs can cut in this quarter or a quarter from now, which they do not control.
Kunhamed Bicha: "FY26 has been our best year. And Q4 is our seventh consecutive quarter of growth. But what stands out is not just the growth rate, it is the quality of it, profitable, broad-based and consistent across verticals and geographies."
U.S. Manufacturing & Tariff Dynamics
- U.S. losses narrowing on operating leverage: U.S. manufacturing losses have shrunk from ~₹14 cr quarterly to ~₹5 cr in Q4 FY26; breakeven is expected in the later part of FY27 as new programs ramp up and operating leverage plays out.
- U.S. plant feeds India pipeline: Many customers start manufacturing in the U.S. and later transition to India, so the U.S. presence creates business effectiveness for India even while the U.S. plant itself is not yet profitable.
- Tariff environment as an accelerator: The period of elevated tariffs helped accelerate new business opportunities, with three large U.S. customers onboarded last quarter across industrial and defence, progressing from prototype to production as customers diversify supply chains.
- Tariff pass-through mechanics: Substantially all tariff impact was passed on to customers, leaving absolute gross margins unaffected; the gross margin percentage was optically impacted by ~110 bps because both revenue and costs were grossed up by the pass-through.
- India manufacturing profitability healthy: India manufacturing, which contributed 77% of Q4 revenue, delivered an EBITDA margin of 16.7% and PAT margin of 12.2%, growing approximately 33% in FY26 across verticals, geographies and locations.
New Programs & Vertical Development
- Semiconductor equipment program advancing: Avalon completed the project readiness phase with a global partner and is building complex box builds; ~50–60% of part numbers are done and awaiting production approval, with reasonable production expected to start sometime in FY27.
- Semiconductor to become a standalone vertical: Management stated the semiconductor equipment business will become a separate vertical in the next 2 to 3 years, currently housed under the industrial segment; the India Semiconductor Mission 2.0 was cited as a supportive factor.
- Aerospace and defence milestones: Aerospace cabin subassemblies passed their first practical inspection and are moving toward volume; Kavach anti-collision system completed testing and is on track for commercial production; satellite communication prototypes for control units were completed, with volume orders expected in FY27.
- Locomotive and industrial processing: Locomotive engine subsystems commenced production; prototypes for industrial processing and power sector customers were initiated, expanding the program pipeline.
- Geographic expansion underway: Progress was made in expanding exports into Southeast Asia, and a meaningful sales presence is being built in Europe over the last few quarters, adding new dimensions to geographic reach.
Kunhamed Bicha: "We are very focused on what we do. So, we are a box build, high-end box build, complicated technology-oriented box build. We will look for further business in that segment instead of trying to do a greenfield, though there's a lot of money available for that. We think there's enough growth in what we do."
Margins & Operating Leverage
- Sequential EBITDA margin improvement: EBITDA margin improved from 11.5% to 11.8% QoQ as revenue scale drove operating leverage, with further scope expected in both India and U.S. plants as sales increase in FY27.
- Gross margin range held: Gross margins have averaged 33% to 35% over five years, and management expects them to hold within that range; the tariff pass-through created an optical ~110 bps compression but no absolute gross profit impact.
- No EBITDA margin guidance: Management declined to provide guidance on EBITDA margin percentage, stating only that operating leverage and scope exist; when pressed on long-term targets versus peers at ~16%, they reiterated they do not guide the metric.
- PCB supply disruption managed: The Middle East conflict caused some PCB price increases, but pricing is pass-through to customers; inventory is actively managed per program and commodity, and no material impact is currently seen, though the situation changes daily.
- Other income from forex: A major part of the business is exports, so currency depreciation provides a forex income benefit that flows through other income, not EBITDA.
Balance Sheet & Capital Allocation
- Working capital beat guidance: Net working capital came in at 112 days, better than the guided 120 to 130 days, driven by receivables reduction of ~12 days YoY, inventory improvement of 2 days as programs moved to execution, and payables reduction of ~2 days.
- Cash flow from operations improved: Sustained working capital improvement drove cash flow from operations of ₹57 cr in FY26, up from ₹25 cr in FY25.
- ROCE aspiration: Management aspires to keep ROCE higher than 20% and asset turns between 8 and 10 times, noting the company has operated at 25% ROCE in the past and that level serves as a goal to march toward over time.
- Capex outlook contained: No major capex is foreseen in the near term; regular capex in the ₹55 to 60 cr range is expected to continue, with existing capacity sufficient to support the growth plan.
Suresh V.R.: "In the past, we have operated at 25%. So, I would say if there is a target for us to march over a period of time, then that should be some goal."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Revenue growth | 24% to 27% revenue growth in FY27 | FY27 |
| Revenue doubling | Double revenue from ₹1,603 cr in FY26 to ~₹3,200 cr | FY29 |
| Gross margin range | Hold between 33% and 35% | Ongoing |
| U.S. manufacturing breakeven | Breakeven in U.S. manufacturing operations | Later part of FY27 |
| India vs U.S. revenue mix | Maintain 80-20 to 78-22 range for India vs U.S. manufacturing | In planning horizon |
| Semiconductor equipment production | Reasonable production to start | Sometime in FY27 |
| Semiconductor as separate vertical | Semiconductor equipment becomes a standalone vertical | 2 to 3 years |
| Capex | Regular capex of ₹55–60 cr; no major capex foreseen | Near term |
Key Metrics
| Metric | Q4 FY26 |
|---|---|
| Revenue | ₹480 cr, up 40% YoY and 14.9% QoQ |
| Gross margin | 33.7%, within guided range of 33%–35%; tariff pass-through optically impacted by ~110 bps |
| EBITDA margin | 11.8%, up from 11.5% in Q3 FY26 |
| PAT | ₹41.2 cr, up 69.5% YoY; PAT margin 8.4% |
| Full-year FY26 revenue | ₹1,603 cr, up 46% YoY, ahead of 40% guidance |
| Full-year FY26 EBITDA margin | 10.8%, EBITDA of ₹173 cr, up 50.9% YoY |
| Full-year FY26 PAT | ₹113 cr, up 78% YoY; PAT margin 6.9% |
| FY27 revenue growth guidance | 24% to 27% |
| Order book | ₹3,441 cr total; ₹2,196 cr executable in 12–14 months, ₹1,245 cr in 15–36 months |
| Order book growth | 24.7% YoY to ₹2,196 cr |
| India manufacturing EBITDA margin | 16.7%, on 77% of Q4 revenue; PAT margin 12.2% |
| U.S. manufacturing loss | ~₹5 cr in Q4, narrowed from ₹7 cr in Q3 and ₹14 cr two years ago |
| ROCE | 20.6%, improved from 15.7% a year ago and 10% two years ago |
| Net working capital | 112 days, improved 12 days YoY from 124 days; better than guided 120–130 days |
| Cash flow from operations | ₹57 cr in FY26, up from ₹25 cr in FY25 |
| Box build share | 56% of revenue, up from 44% three years ago |
| Asset turns | ~9.9 times |
| Net debt-to-equity | ~0.06; net debt ₹40 cr |
| Capex | ₹21 cr in Q4; ₹56 cr for full-year FY26 |
| Top 10 customer concentration | 61% of FY26 revenue |