Key Takeaways
- Flat quarter, weather and election hit: Volume was flat as election-driven labor disruption and extreme heat cut construction hours, while a planned plant shutdown and new-product launch costs compressed margins.
- JV plant now live, but a drag today: The Kheda JV, India's first AAC wall plant, began commercial production and contributed a INR 2.83 crores loss this quarter, with teething problems now largely resolved.
- Demand is already turning: Management reports demand improvement over the last 15-20 days, and the structural conversion story from brick to block remains intact.
- Margin below 20% again, but older assets are healthy: The block division's two older factories run at 22-23% EBITDA margin; the drag is entirely from the new JV plant that had minimal revenue against a full quarter of depreciation.
- What to watch next quarter: Whether the demand uptick converts to volume, the pace of JV plant ramp-up toward its 75-80% utilization target, and any commercial orders for the new SmartBuild wall and panel products.
Quarter in Review: What Went Wrong
- Election and labor disruption: The general election caused migrant labor shortages in the West and North regions, directly interrupting construction activity and flattening volumes.
- Heatwave shutdowns: In Ahmedabad and Gandhinagar, municipal corporation guidelines restricted construction to 4-5 hours a day during May due to excessive heat, further compressing activity.
- Planned plant shutdown: A pre-planned technological upgradation shutdown at the Umargaon plant began May 18, 2024, sacrificing near-term output for future efficiency.
- JV launch costs hit P&L: Inauguration and marketing expenses for the new SmartBuild wall product, plus a full quarter of depreciation and operating costs against minimal revenue, weighed on profitability.
- JV loss flows through: The Kheda JV posted a INR 2.83 crores loss, of which INR 1.3 crores is attributed to the JV partner; the remainder hit BIGBLOC's consolidated profitability because it holds the majority stake.
- Price correction in the market: A modest price correction occurred across the value chain as cement, lime, and coal input costs fell, though the company held its EBITDA margin steady on the block side.
Saboo: "So we have already started seeing improvement in demand since almost 15-20 odd days. So demand is definitely improving."
The JV Plant: Teething Problems and the Margin Bridge
- Why margin fell below 20%: This is the second consecutive quarter below 20% EBITDA margin. The two older block factories continue to deliver 22-23% EBITDA margin. The drag is entirely from the new JV plant, which started production only at end-March and had teething problems that kept output minimal while depreciation and opex ran for the full quarter.
- The tax-rate trade-off: Management pushed production hard to achieve startup within 6-7 months, a timeline that qualified the JV for the 15% income tax rate, accepting near-term margin pain for a structural tax benefit.
- Ramp-up path: The company expects to reach 75-80% capacity utilization on an annual basis once the plant stabilizes, and wants to fill existing capacities before chasing further margin expansion.
- New competition is arriving but fragile: New AAC block plants are entering the market and most of their production is getting absorbed, but management argues their quality is not up to mark and most will not be viable in the longer run.
Saboo: "However, these new plants, which have come up, the quality and all is not up to the mark. So initially, yes, definitely they have got this some sort of a visibility. But I think most of these plants in the longer run will not be viable to run."
New Products: SmartBuild Wall and Panels
- SmartBuild wall (SCG JV) product ready: The company has made the "perfect product" at the SCG JV plant. Mock-ups have started at numerous sites across Ahmedabad, Gandhinagar, Jaipur, Bombay, and Pune, with positive builder feedback. The company is now working with structural engineers and architects to convert interest into orders.
- Panel trials underway: Trial sales of AAC panels have begun, with mock-ups completed at 10-15 sites and positive response. Management is in talks with MNCs for potentially large orders that could "drastically improve" numbers if they materialize.
- Tile adhesive entry: The company already sells mortar and plaster through contract manufacturing under its own brand. Orders are being placed to install a manufacturing setup for tile adhesive, extending the product portfolio further.
- Acceptance timeline: Management expects the new JV product will take 1-2 quarters to gain market acceptance, making Q2-Q3 FY25 the window to watch for commercial traction.
Saboo: "So at SCG, finally, we have been able to make the perfect product, and the mock-up for the new AAC wall that we have made has started at numerous sites at Ahmedabad, Gandhinagar, Jaipur, Bombay, and Pune."
Competitive Position and Strategy
- Focus as a moat: Management attributes its success in AAC blocks to 100% focus on this single product, contrasting it with cement majors like UltraTech for whom AAC blocks were a very small business. Fifteen years of industry experience and lessons learned from past issues compound that advantage.
- Contract manufacturing as distribution: BIGBLOC does contract manufacturing for Ambuja and ACC at the same EBITDA margin, representing 2-3% of volume. The rationale is access: Ambuja's dealer network reaches places that would take BIGBLOC 1-2 years to penetrate. Ambuja sells under the CoolWall brand at a ~20% higher price targeting individual homeowners (B2C), while BIGBLOC is mostly B2B.
- South India expansion in due diligence: Land near Chennai or Bangalore is under due diligence. The company is working with the bank and wants to be 100% sure before finalizing, citing language barriers and the challenge of entering a new geography.
Saboo: "I think maybe this was 100% our focus was 100% on this whereas I think for the likes of UltraTech maybe, you know, this was a comparatively very, very small business for them. So I think that would have maybe worked in our favor."
Capacity and Capex
- Capacity expansion completed: Installed capacity increased from 300,000 to 400,000 cubic meters per annum as of June 1, 2024. A further expansion to 500,000 cubic meters per annum is expected to complete within the next two months.
- Utilization target: On an annual basis, management expects capacity utilization in the range of 75-80%. With current installed capacity, approximately 0.1 crore cubic meters should be the utilized capacity for the upcoming two years.
- Ramp-up lag: Any new capacity addition takes almost 6-9 months to scale up once capex is completed, so the full benefit of the 500,000 cubic meter capacity will not flow through immediately.
- Solar investment: A 625 kilowatt rooftop solar power project is being installed at the Wada plant, reducing energy costs over time.
- Shareholder returns: The Board recommended a 20% final dividend for FY24, with the promoter group waiving their share, and a 1:1 bonus issue.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Capacity expansion | Increase installed capacity to 500,000 cubic meters per annum | Within next 2 months |
| Capacity utilization | Reach 75-80% utilization on annual basis | Ongoing, across current installed capacity |
| EBITDA margin | Maintain between 20% and 25% going forward | Ongoing |
| JV product market acceptance | New SmartBuild wall product to gain traction | 1-2 quarters |
| Capex ramp-up | New capacity additions to scale up | 6-9 months post capex completion |
Key Metrics
| Metric | Q1 FY25 |
|---|---|
| Operating revenue | ₹52 cr, +6% YoY |
| EBITDA | ₹10 cr, +24% YoY |
| EBITDA margin | 18.6% |
| EBITDA margin (block division, existing plants) | 22-23% |
| Profit after tax | ₹3 cr, -49% YoY |
| PAT margin | 5.81% |
| Adjusted net profit (ex-JV minority loss) | ₹4.39 cr |
| JV loss (CM Cement BigBloc) | ₹2.83 cr, of which ₹1.3 cr attributed to JV partner |
| Capacity utilization (BigBloc Building Elements) | 78% |
| Installed capacity | 400,000 cubic meters per annum as of June 1, 2024, up from 300,000 |
| Expected installed capacity by year-end | 0.13 crore cubic meters per annum |
| Expected capacity utilization range | 75-80% |
| Expected utilized capacity (next 2 years) | ~0.1 crore cubic meters per annum |
| Contract manufacturing share of volume | 2-3% |
| Total marketing expenses | 1-1.5% of revenue |
| Final dividend (FY 23-24) | 20%, promoter group waived their share |
| Bonus issue | 1:1 |