Key Takeaways
- Toughest quarter in recent memory: Revenue fell 13% QoQ to Rs. 996 crores as PVC prices hit 8-10 quarter lows under a wave of Chinese dumping, though domestic demand stayed strong and prices began recovering in July.
- Custom manufacturing is the bright spot: Phase 1 construction is complete, two LOIs are in hand (one now a firm order), and full-year revenue growth guidance was raised from 10-15% to over 25%.
- PVC spreads are snapping back: The Suspension PVC-VCM spread has moved from ~$113/mt in Q1 to nearly $200/mt post-duty, while Paste PVC contribution has climbed to roughly $250/mt.
- Regulatory relief is pending, not guaranteed: The DGTR has recommended quantitative restrictions on low-quality Chinese resin, but the Commerce Ministry's final notification is still awaited with no timeline given.
- What to watch next quarter: Whether the PVC price recovery holds through the import taper, the pace of custom manufacturing order conversion from the pipeline, and any movement on the DGTR notification.
The PVC Cycle: Crash, Floor, Rebound
- What broke: Global PVC prices collapsed to their lowest in 8-10 quarters as sluggish worldwide demand met a flood of Chinese and other imports into India. Suspension PVC realizations dropped roughly 30% YoY, and Paste PVC import prices fell another 10% sequentially from an already weak Q4.
- What held: Domestic demand for both Suspension and Paste PVC resin was robust, driving volume growth YoY and sequentially. Finished stock fell to less than a day's production by end-July, signaling the market was clearing fast.
- What turned: Prices bottomed at the end of Q1 and began recovering in July, aided by a drop in import arrivals as North-East Asian plants (mainly Chinese carbide PVC) cut operating rates. The import taper combined with strong domestic offtake to lift prices into August.
- Spread mechanics: Margins in Suspension PVC are driven by the PVC-VCM delta. In a falling market, PVC prices drop immediately while VCM follows with a month's lag, compressing spreads. That dynamic has now reversed: the spread widened from ~$113/mt in Q1 to nearly $200/mt post-duty.
- Paste PVC contribution has moved up to roughly $250/mt after all variable costs, and the company holds ~17,000 tons of ethylene and EDC inventory, a positive in a rising price environment.
- China's role: The reduction in exports reflects both lower Chinese supply (plant turndowns/shutdowns) and improved domestic Chinese consumption. US exports have also tightened due to production shortages, removing supply from the two largest exporting geographies.
Ramkumar Shankar: "Q1 FY '24 has been one of the toughest quarters in recent times for Chemplast and the PVC industry in India as a whole."
Custom Manufacturing: The Diversification Bet
- Phase 1 complete: Construction finished on schedule with an investment of roughly Rs. 300 crores, and the facility was dedicated by the Chairman and Board on August 10, 2023.
- Order book building: Two letters of intent are in place. One has already converted to a commercial order; the second is expected to receive an initial order fairly soon. The pipeline beyond these two remains strong, and management expects it to grow once customers visit the commissioned plant.
- Revenue guidance raised: Full-year growth is now expected to be over 25%, up from the 10-15% indicated earlier, driven by the current pipeline. The business remains campaign-based, so quarterly numbers are lumpy and management prefers annual tracking.
- Long-term ambition: The company is positioned to reach roughly Rs. 1,000 crores in revenue from custom manufacturing in the next three to four years. Phase 1 capacity is expected to reach peak utilization over two to three years.
- Phase 2 on track: Expected to be commissioned by the end of this financial year.
- Capital allocation priority: Custom manufacturing is the number one focus for future capital deployment. Once 60% visibility is achieved on the current block, the next capex block will be announced; expenditure on that would not begin until next year or later.
- ROCE expectations: At peak utilization, the current brownfield expansion is expected to deliver roughly 40% ROCE. For fresh investments on a steady-state basis, ROCE could range between 30% and 40%.
- Model boundaries: All custom manufacturing is for global innovators and for markets outside India. The company is agnostic to end-market, with a pipeline spanning agrochemicals, pharma and other fine chemicals. It explicitly does not compete with its customers, demonstrated by winning an active ingredient order from one client.
Krishna Rangachari: "We do not have any intent to compete with our customers. Second, which means that we are willing to make whatever they ask us to make in terms of whether it's an active ingredient."
Other Chemicals: The Drag That Will Linger
- Other chemicals revenue fell 45% YoY and sequentially, hit by volume and price declines across most products. Weak demand, excess domestic supply from recent capacity additions, and the global slowdown combined to create significant pricing pressure.
- Caustic soda will take longer to recover than PVC, weighed down by overcapacity in India. There are very early signs of stability and a slight recovery, but no rapid bounce is expected. India is a net exporter of caustic, and Inner Mongolian capacity is not a major threat because caustic is 50% water and transportation costs limit competitive reach.
- Chlorinated solvents face similar overcapacity challenges in India, with recovery likely only after another couple of quarters.
- Refrigerant gas is a very small part of the portfolio with minimal market presence.
- Headwinds in the other chemicals segment are expected to continue for a couple more quarters.
Margins, Costs & Cash Flow
- Gross margin compression: Pricing pressure and the lag in feedstock cost correction drove gross margins down from 35% in Q4 FY23 to 27% in Q1 FY24. Employee costs and other expenses were broadly flat sequentially.
- Cost tailwind incoming: Coal and superior kerosene prices declined at the end of Q1, and that benefit will flow through in coming quarters. Feedstock and energy costs corrected in the latter part of the quarter.
- Cash generation: Q1 was an exception; management expects positive cash generation to resume in the coming quarters.
- FY24 capex: Cash spend for the year will be roughly Rs. 750 crores across three projects: the Paste PVC expansion, custom manufacturing Phase 1 and Phase 2, and caustic soda capacity restoration (completing this quarter).
- Balance sheet capacity: The company holds Rs. 1,244 crores in cash, sufficient for further expansions, with debt financing tied up on a 60:40 basis.
Expansion Projects: Timeline & Capacity
- Paste PVC expansion: A new 41,000-ton Specialty Paste PVC facility is on track for commissioning around mid-November of this year.
- Custom manufacturing Phase 2: Expected to be commissioned by the end of this financial year.
- Caustic soda capacity restoration: Completing this quarter.
- Next capex trigger: A new block will be announced once 60% visibility is reached on the current block. The first block is fully visible; the second has reasonable visibility. Expenditure on the next block would not occur this year.
The Regulatory Wildcard
- DGTR recommendation: On May 15, 2023, the Director General of Trade Remedies proposed quantitative restrictions on lower-quality PVC resin imports from a few geographies, largely China. The recommendation aims to hold imports to the same quality standards applied to domestic producers.
- Status: The final notification by the Commerce Ministry is still awaited. Management has no indication of the timeline, describing it only as "due any time."
- Impact if notified: The threat from Chinese imports would be mitigated to a large extent, bringing more discipline to the market and preventing rampant dumping.
Ramkumar Shankar: "The entire purpose is to ensure that the same quality standards that domestic industry are being held to, is applied to imports as well. And I think that is clearly the purpose of this entire exercise."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Custom manufacturing revenue growth | Over 25% (raised from 10-15%) | FY24 |
| Custom manufacturing revenue target | ~Rs. 1,000 crores | Next 3-4 years |
| Phase 1 peak utilization | Ramp-up to peak | Next 2-3 years |
| Phase 2 commissioning | On track | End of FY24 |
| Paste PVC expansion commissioning | 41,000-ton facility | Mid-November 2023 |
| Caustic soda capacity restoration | Completing | This quarter (Q2 FY24) |
| FY24 capex cash spend | ~Rs. 750 crores | FY24 |
| Profitability improvement | Gradual, driven by better margins and new projects | Next few quarters |
| Other chemicals headwinds | Expected to persist | Couple more quarters |
| DGTR quantitative restrictions | Awaiting final Commerce Ministry notification | No timeline given |
Key Metrics
| Metric | Q1 FY24 |
|---|---|
| Revenue from operations | ₹996 cr, down 13% QoQ |
| Gross margin | 27%, down from 35% in Q4 FY23 |
| EBITDA | Loss of ₹35 cr |
| Net profit | Loss of ₹64 cr |
| Finance cost | ₹44 cr |
| Power and fuel cost | ₹156 cr |
| Cash and bank balance | ₹1,244 cr (consolidated) |
| Net cash position | ₹27 cr net cash positive |
| Project loans drawn during quarter | ₹213 cr |
| Suspension PVC revenue change | Down ~30% YoY, down ~9% QoQ |
| Suspension PVC volume change | Up 15% YoY, marginal uptick QoQ |
| Paste PVC sales volume change | Up 32% YoY, up ~10% QoQ |
| Other chemicals revenue change | 45% de-growth YoY and QoQ |
| Custom Manufactured Chemicals revenue growth guidance | Over 25% for FY24, up from 10–15% earlier |
| Suspension PVC-VCM spread (Q1 actual) | ~$113/mt |
| Suspension PVC-VCM spread (current, post-duty) | ~$200/mt |
| Paste PVC contribution (current, after variable costs) | ~$250/mt |
| Suspension PVC import price (current) | $900/mt, up from a low of $700–725/mt |
| Paste PVC import price (current) | ~$1,100/mt, up from a low of ~$900/mt |
| Suspension PVC imports into India | ~600,000 tons in Q1, down from ~900,000 tons in Q4 FY23 |
| Paste PVC imports into India | ~13,500 tons in Q1, down from 35,000 tons in Q4 FY23 |
| Caustic soda CFR Asia price | ~$395/mt in June 2023, down from ~$740/mt in June 2022 |
| Custom manufacturing revenue target | ~₹1,000 cr in next 3–4 years |
| Custom manufacturing ROCE (peak utilization) | ~40% |
| FY24 cash spend (capex) | ~₹750 cr |