Key Takeaways
- China import shock crushed PVC margins: A flood of 332,000 metric tons of Chinese Suspension PVC in Q4 alone, more than all of FY22, drove severe price and margin erosion through March, April and May.
- Custom Manufacturing is the structural growth story: Two LOIs signed with a combined ~₹800 crores revenue potential, Phase 1 commissioning by H1 FY24, and a steady-state target of ~₹1,000 crores top line in 3–4 years.
- Balance sheet strength preserved: The company remains net cash positive, with finance costs halved YoY to ₹154 crores after repaying NCDs with IPO proceeds.
- Q1 FY24 will be painful: Management flagged Q1 as "quite challenging" across chlorovinyl products, with caustic and chlorine prices already below March levels and PVC still under pressure.
- What to watch next quarter: Whether safeguard duties are imposed on Chinese PVC imports, the pace of PVC price stabilization and margin recovery, and progress on formalizing the two Custom Manufacturing LOIs into supply agreements.
The China Import Shock & PVC Margin Collapse
- Unprecedented import volumes: China exported 332,000 metric tons of Suspension PVC to India in the January–March quarter alone, exceeding the entire FY22 import volume of 250,000 tons and dwarfing the 73,000 tons imported in 2021. This dumping was triggered by China's Zero COVID policy suppressing domestic demand until November 2022.
- Price cascade: PVC prices improved up to February, then reversed sharply from March as imports surged. Paste PVC price increases rolled out in January had to be more than given away in March as the reversal happened. The trend continued with prices moving lower in April and the first week of May, though the last 10 days of May were quiet.
- Feedstock lag amplified the damage: In a falling market, EDC feedstock prices lag finished PVC prices on the way down, compressing margins. Management noted that FY22-23 was "more of a fall than a rise," so only the negative impact of this lag was felt, never the positive.
- Carbide PVC economics under stress: Coal prices at ~$110/ton, still roughly double year-ago levels, make the purely export-oriented carbide PVC model "not really workable" at current prices once freight and duties are added. Management expects operating rates at carbide PVC plants to give way first.
- Import slowdown emerging: Paste PVC imports from China fell in March and declined further in April, driven more by a slight domestic recovery within China than by safeguard measures, which have not yet been implemented.
Ramkumar Shankar: "In the January-March quarter alone, the total import of Suspension PVC from China was around 332,000 metric tons, which is more than what was imported in the whole of FY21-22. This has had a severe impact on PVC prices and margins in March, April and May."
Custom Manufacturing: The Structural Pivot
- Two LOIs anchor the pipeline: Signed with a global agrochemical innovator, the two letters of intent carry a combined revenue potential of ~₹800 crores over a 5-year contract period. The first LOI has an agreed commercial framework, with a supply agreement being drafted for formalization within a month or so. Commercial supplies are anticipated to start from Q4 FY24.
- Phase 1 commissioning on track: The first phase of the Custom Manufactured Chemicals project is expected to be commissioned by H1 FY24, with Phase 2 targeted for completion by March 2024. On a steady state, management targets reaching a top line of ~₹1,000 crores from this business in the next 3 to 4 years.
- Ramp-up is gradual by design: Phase 1 capacity for the two announced products will take 2–3 years to fully utilize. During initial years, gaps may be filled with other products from the pipeline. FY24 revenue growth of 10–15% is expected, mostly from existing operations, since new block commissioning late in H1 will contribute only trial volumes in the first year.
- Chemistry, not price, drives selection: Decisions are guided by chemistry fit or the ability to scale technology, not by pricing. Most products come with healthy margins and transparent price formulas linked to variable costs, with escalations adjusted on a campaign-to-campaign basis through customer reconciliations.
- Steady-state margin target: Contribution margin (not EBITDA margin) is targeted at around 40% on a steady-state basis, though initially lower as processes stabilize.
- R&D engine scaling: The R&D team of ~40 chemists and chemical engineers is expected to grow over the next 3–6 months as the pipeline expands. Core strengths include cyanation, hydrogenation, and purifying liquid products to high purity, but the defining capability is integrating chemistry development with scale-up to large commercial volumes.
Krishnakumar Rangachari: "So on the custom manufactured chemicals, so for the Phase 1 capacity, I would see a 2- to 3-year period before we completely utilize the capacity for the 2 products that we have announced."
Segment Performance
| Segment | Q4 Trend | Commentary |
|---|---|---|
| Suspension PVC | ▲ Revenue up ~7% QoQ | Price increases through February drove the gain despite marginally lower volumes; FY23 volumes up 9% on successful debottlenecking. |
| Specialty Chemicals | ▼ Revenue down 6% QoQ | Decline driven by lower volumes; full-year volumes still up ~6%. |
| Other Chemicals | ▼ Revenue down 29% QoQ | Hit by volume and price drops across most products, largely from new domestic capacity commissioning; FY23 revenue still up 16% YoY. |
| Custom Manufactured Chemicals | ▲ Strong growth | FY23 revenue up ~30% YoY to ~₹325 crores, a silver lining amidst broader sluggishness. |
| Paste PVC | ▼ Margin pressure | Price increases given away in March reversal; feedstock EDC prices lagged, hurting margins. Inventory was only ~5 days at quarter-end, so the volume decline was not an inventory build. |
Cost Structure & Balance Sheet
- Power cost relief arriving: Power and fuel costs, which increased ₹193 crores in FY23, improved in the March quarter with a positive impact of ₹26 crores. The trend of softer power prices is continuing into the current quarter.
- Finance costs halved: FY23 finance costs dropped from ₹322 crores to ₹154 crores, primarily due to repayment of NCDs using IPO proceeds and a reduction in the subsidiary's interest rate post-IPO.
- Net cash position: The consolidated balance sheet remains healthy and the company continues to be net cash positive.
- Inventory lean: Suspension PVC inventory was only ~3.5 days and Paste PVC ~5 days at the end of March, confirming the QoQ volume decline was not driven by inventory build.
Expansion Projects & Capacity
- Paste PVC expansion: A 41,000-ton capacity addition is on track for commissioning around November 2023. Management expects to sell 8,000–10,000 tons from the new capacity in FY24, all in the last quarter. The environmental permit allows expansion up to 70,000 tons, leaving room for a second phase of ~30,000 tons.
- Paste PVC market growth: The market is expected to grow from 163,000 tons last year to ~180,000 tons when the expansion is commissioned, and to ~200,000 tons in the first full year of new capacity, with significant room for import substitution still available.
- VCM sourcing diversified: The additional 40,000 tons of VCM feedstock required is not a stretch, with supply sources diversified across Northeast Asia, Southeast Asia, Europe and the Middle East, avoiding dependence on any single geography or supplier.
- Backward integration on hold: No concrete plan exists for backward integration into ethylene or VCM. The key obstacle is the lack of merchant ethylene availability within India, an issue that would need to be addressed.
- India SPVC demand trajectory: Assuming 8–10% normalized growth, India will require almost one new Suspension PVC plant every year going forward.
Ramkumar Shankar: "The issue has always been in India that there has not been enough ethylene available because the key feedstock for making PVC is ethylene, and there is not much merchant ethylene that is available within India. And that is something that we would need to address."
Pricing & Margin Recovery Outlook
- PVC stability point may be near: Management believes the industry is approaching a stability point after 12–14 months of constant decline driven by Chinese imports. Once price stability is reached, margins are expected to restore with a 4–6 week lag as the feedstock-to-finished-product relationship normalizes.
- Safeguard measures awaited: The domestic industry has represented to the government regarding the flood of low-quality PVC from China and requested safeguard measures. A decision is expected anytime, and management believes some action is needed. If announced, it would "definitely play a major role in stemming the flow."
- Caustic soda and chloromethanes: Prices have dropped largely due to additional capacities entering the market. Recovery is expected only after those volumes are absorbed. Current prices are below March levels.
- Q1 FY24 flagged as challenging: Management explicitly guided that Q1 will be difficult given the drop in prices across chlorovinyl products, especially PVC, though this is viewed as a short-term phenomenon expected to change as Chinese economic conditions improve and low-priced imports are stemmed.
Ramkumar Shankar: "The problem right now in the last maybe 12 months or 14 months has been that, that has not been that stability that's been reached. There has been a constant decline largely driven by this flood of imports from China. So the minute that comes to an end, and generally, in the industry, we believe that we are at that point."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Custom Manufacturing Phase 1 commissioning | First phase of CMC project commissioned | H1 FY24 |
| Custom Manufacturing Phase 2 commissioning | Next phase completed | March 2024 |
| Paste PVC expansion commissioning | 41,000-ton capacity addition online | Around November 2023 |
| Paste PVC new capacity sales | 8,000–10,000 tons sold from new capacity | FY24, all in last quarter |
| Custom Manufacturing FY24 revenue growth | 10–15% growth, mostly from existing operations | FY24 |
| Custom Manufacturing steady-state revenue | ~₹1,000 crores top line | Next 3–4 years |
| Custom Manufacturing steady-state margin | Contribution margin of ~40% | Steady state (initially lower) |
| First LOI commercial supplies | Supplies begin for first LOI product | Q4 FY24 |
| PVC margin recovery | Recovery expected after price stability, with 4–6 week lag | From around mid-Q2 FY24 onwards |
| R&D team expansion | Headcount to grow from ~40 | Next 3–6 months |
Key Metrics
| Metric | Q4 FY23 |
|---|---|
| Revenue from operations | ₹1,147 crores, declined YoY |
| EBITDA | ₹97 crores, 25% higher QoQ |
| EBITDA margin | 9.5% |
| PAT | ₹46 crores, margin of 4%, 70% higher QoQ |
| Finance cost | ₹38 crores |
| Other expenses | ₹263 crores, reduced from ₹300 crores in Q3, primarily due to lower power and fuel costs which reduced by ₹26 crores |
| FY23 revenue from operations | ₹4,941 crores, declined 16% YoY |
| FY23 EBITDA | ₹468 crores, margin of 9.5% |
| FY23 PAT | ₹152 crores, margin of 3% |
| FY23 finance costs | ₹154 crores, dropped from ₹322 crores in FY22 |
| Suspension PVC QoQ revenue change | ~7% increase, driven by price improvements up to February |
| Specialty Chemicals segment QoQ revenue change | 6% decline, owing to a decline in volumes |
| Other chemicals QoQ revenue change | 29% drop, due to drop in volumes and prices |
| Custom manufactured chemicals FY23 revenue growth | 26% YoY |
| Custom manufactured chemicals FY23 revenue | ~₹325 crores, growth of ~30% YoY |
| Custom manufactured chemicals FY24 revenue growth guidance | 10% to 15% |
| Paste PVC sales volume FY23 | 68,630 tons, FY22: 64,838 tons |
| Suspension PVC FY23 volume growth | 9% YoY |
| India Paste PVC demand growth FY23 | ~17% to 163,000 metric tons |
| India Suspension PVC demand growth FY23 | over 30% to 0.37 crore metric tons |
| China Suspension PVC imports into India in Q4 | ~332,000 metric tons, more than whole of FY22 |
| Combined revenue potential of 2 LOIs | ~₹800 crores over the contract period |
| Custom manufactured chemicals steady-state top line target | ~₹1,000 crores in next 3 to 4 years |
| Paste PVC expansion capacity | 41,000 tons per annum, commissioning expected Q3 FY24 |
| Expected Paste PVC sales from new capacity in FY24 | 8,000 to 10,000 tons, in the last quarter of the year |
| Custom manufactured chemicals product gross margin | roughly around 40% on steady state, initially slightly lower |
| Average Suspension PVC realization Q4 FY23 | close to ₹85,000 per ton |
| Current Suspension PVC price | around ₹76,000 per ton |
| Power and fuel cost reduction in Q4 | ₹26 crores positive impact |
| FY23 power and fuel spend | ₹670 crores |
| Suspension PVC inventory at end of March | ~3.5 days of production |
| Paste PVC inventory at end of March | ~5 days of production |
| Custom manufactured chemicals molecules commercial in FY23 | 9 molecules |
| Custom manufactured chemicals molecules to be added in FY24 | 3 molecules, taking total to 12 |
| Custom manufactured chemicals production volume FY23 | 1,300 metric tons |
| Steady-state volume for the 2 signed LOIs | 1,000 to 1,400 tons combined |