Key Takeaways
- Steady quarter, conservative guide: Revenue grew moderately with no big upsurge, and management called its own 20% top-line and absolute EBITDA growth guidance conservative, hoping to do "much, much better."
- Segment reshuffle creates a cleaner story: The merger of industrial and auto aluminum into a single Aluminum Products segment simplifies tracking and is already delivering operating leverage benefits.
- Industrial margin dip is mix-driven, not structural: A sharp EBIT margin drop in Industrial & Engineering came from a disproportionate surge in lower-margin storage solutions revenue, while sub-segment margins held stable.
- Debt reduction is a stated priority: The company expects to cut overall debt by roughly ₹100 crores by Q4 FY23 as raw material prices ease and inventory days normalize, with an improved debt-to-EBITDA ratio of 1.17:1 already in hand.
- What to watch next quarter: Whether the promised Industrial & Engineering margin recovery begins, the pace of the two-wheeler-to-passenger-vehicle mix shift in aluminum, and any CAPEX revision if growth exceeds 25%.
Segment Reorganization & Aluminum Products
- Two into one: The industrial aluminum casting business (electrical switchgear, gearboxes, medical equipment, EV parts) was merged with the auto aluminum business into a single Aluminum Products segment, effective immediately, to improve focus, synergy, and operating leverage.[15-16]
- Industrial & Engineering redefined: The legacy segment now contains only non-auto, non-aluminum businesses: engineering, critical sub-assemblies, machining, and storage solutions. [15-16]
- Aluminum margin expansion: Sequential margin improvement came partly from high-margin products but more from operating leverage after merging the two divisions, with full-year margins expected to stay on similar lines to Q1.
- Mix shift underway: Two-wheeler dependence in aluminum casting is already declining and will be significantly down in coming quarters, with new business coming mainly from passenger vehicles; the two-wheeler share is expected to drop from ~50% this year to 30-40% next year.
- White goods optionality: No current business exists, but management sees future possibilities in consumer durables and white goods that would flow through the Aluminum Products segment.
Srinivasan Ravi: "Growth CAGR for the next three, four years, we'll have 20%. From year-to-year, it may change a little, yes, agreed, But we are very confident about a 20% CAGR."
Industrial & Engineering: The Margin Story
- The headline drop: EBIT margin fell sharply QoQ from ~13.7% to ~7.8%, driven entirely by product mix: the aluminum portion was carved out, storage solutions revenue jumped from ₹65 crores to ₹88 crores (material-intensive, lower EBITDA percentage), and sub-assemblies dropped 15%. Margins within sub-segments remained stable.
- Recovery path: Sustainable margin is expected to land somewhere between Q4 and Q1 levels, with a full restoration to last year's Q4 margin by Q4 FY23, driven by new machining businesses, growth in automated solutions, and a changing product mix away from disproportionate storage solutions.
- Storage solutions tailwind: The order book is fully booked for the next six months, and an increasing share of automated solutions (which yield better margins than static racking) will improve profitability going forward.
- 20% CAGR still the target: Even after removing the aluminum portion, management sees 20% CAGR going forward across critical sub-assemblies, critical components machining, and automated storage solutions.
Powertrain & Auto Dynamics
- Powertrain margin levers: Marginal EBIT margin improvement QoQ came from better operating leverage on higher top line and a product mix shift toward higher value-add machining products in commercial vehicles, as the farm sector was still not picking up.
- Passenger vehicle entry: The passenger vehicle segment is growing due to continuous product launches from a major customer; this segment was not significant earlier and management believes the IC engine business will run for five to seven years.[16-17]
- Daimler portfolio risk contained: Around 15% of the Daimler value-addition portfolio will be lost by 2024 as Cummins engines enter Daimler India's heavy-duty trucks, but the remaining ~70-80% of Daimler business (primarily Daimler Brazil) is protected until 2028 or 2029. The impact on overall powertrain revenue will be in very low single digits, and the business will continue to grow even after 2024 as new businesses kick in.
- EV view on commercial vehicles: Sub-1-ton vehicles and three-wheelers are most likely to move to EV; above 1-ton, CNG will win for the next few years; higher segments remain predominantly IC engine, with hydrogen and green ammonia being worked on internationally. Management believes a call on commercial vehicle EV penetration must wait for solid-state batteries.
Srinivasan Ravi: "80% of our business or 70% of our business is fully protected until 2028."
Margins, Costs & Balance Sheet
- RM tailwind: Blended raw material cost as a percentage of sales reduced QoQ due to steadily declining raw material prices, pass-through mechanisms aligned with the current situation, and a conscious product mix shift toward higher value-add products.
- Staff cost step-up: Staff costs rose QoQ because the company started providing for bonus in Q1 itself (normally done in Q3) due to confidence in profitability, and also gave salary increases to adjust for inflation.
- Creditor reduction was deliberate: A substantial reduction of ~₹70 crores in creditors came because an improved credit rating lowered borrowing costs below some suppliers' costs, enabling cash discounts that also added to margins.
- Debt trajectory: Short-term debt rose by ₹80 crores due to higher inventory days, higher turnover, and high raw material prices (now coming down); long-term debt reduced by ₹30 crores. The company expects to reduce overall debt by around ₹100 crores from current levels by Q4 FY23.
- ROCE jump: Annualized pre-tax ROCE reached 26% versus 20% last year, partly because creditor days were reduced and cash discounts were taken.
Srinivasan Ravi: "The Q1 number if you are extrapolating for the full year, debt-to-EBITDA is 1.17:1 which is an improvement from 1.33 for the last year totally. So, I think that is a good matrix."
Demand Environment & Sourcing Shifts
- Q2 tracking steady, not spectacular: Three weeks into Q2, management sees the quarter on similar lines to Q1 with no big upsurge; Q3 is expected to be steady, and Q4 will be the strongest quarter.
- Exports as a structural tailwind: A growing trend toward exports from India is expected as multinationals look to de-risk from the Asian neighbor; even a small shift in manufacturing capacity will benefit India across both auto and non-auto segments over the next three to four years.
- European sourcing is sticky: Management pushed back on the idea that European auto OEMs are shifting sourcing to India due to the energy crisis, noting that OEMs are fully compensating their key tier-1 suppliers for power and fuel costs, and shifting business takes years and would collapse the European supply base.
- New order streams: Supply of a new cylinder head order for Daimler Brazil started in June 2022; token orders and agreements are in place to machine sub-gearbox housing for wind turbines for green power.
Srinivasan Ravi: "Shifting business will be shooting on their own foot, because then the tier-1 suppliers in Europe will collapse and shifting business takes years to happen."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Top-line and EBITDA growth | 20% top-line growth and 20% absolute EBITDA growth (management calls it conservative) | FY23 |
| CAGR | 20% CAGR, with year-to-year variations | Next three to four years |
| Debt reduction | Reduce overall debt by ~₹100 crores from current levels | By Q4 FY23 |
| Industrial & Engineering margin recovery | Margins restored to levels equivalent to last year Q4 | By Q4 FY23 |
| Aluminum Products full-year margin | On similar lines to Q1 margin; may improve if operating leverage rises | FY23 |
| CAPEX | ₹225 crores sufficient for guided 20% growth; may revise marginally if growth exceeds 20-25% | FY23, with possible Q4 revision |
| Capacity utilization | May touch 80% utilization in at least one month | Q3 FY23 |
| Daimler India powertrain loss | ~15% of Daimler value-addition portfolio lost; impact on powertrain revenue in very low single digits | By 2024 |
| Daimler Brazil protection | ~70-80% of Daimler business protected | Until 2028 or 2029 |
Key Metrics
| Metric | Q1 FY23 |
|---|---|
| Total revenue | ₹676 cr, 3% QoQ growth vs ₹654 cr in Q4 FY22 |
| Auto Powertrain revenue | ₹348 cr, 3% QoQ growth vs ₹338 cr in Q4 FY22 |
| Aluminum Products revenue | ₹171 cr, 3% QoQ growth vs ₹167 cr in Q4 FY22 |
| Industrial & Engineering revenue | ₹157 cr, 4% QoQ growth vs ₹150 cr in Q4 FY22 |
| Total EBIT | ₹112 cr, vs ₹105 cr in Q4 FY22 |
| Auto Powertrain EBIT | ₹95 cr, vs ₹86 cr in Q4 FY22 |
| Aluminum Products EBIT | ₹20 cr, vs ₹11 cr in Q4 FY22 |
| Industrial & Engineering EBIT | ₹11 cr, vs ₹20 cr in Q4 FY22 |
| Auto Powertrain EBIT margin | ~200 bps increase QoQ (per an analyst's math) |
| Industrial & Engineering EBIT margin | ~7.8%, vs ~13.7% in Q4 FY22 (per an analyst's math) |
| Value add – Auto Powertrain | ₹223 cr |
| Value add – Aluminum Products | ₹71 cr, vs ₹57.5 cr in Q4 FY22 (new classification) |
| Value add – Industrial & Engineering | ₹58 cr, vs ₹63 cr in Q4 FY22 (new classification) |
| Storage Solutions sub-segment revenue | ₹88 cr, vs ₹65 cr in Q4 FY22 |
| Overall debt | ₹760 cr, increased ₹50 cr QoQ; long-term debt reduced ₹30 cr, short-term debt increased ₹80 cr |
| Debt-to-EBITDA (annualized) | 1.17:1, improved from 1.33 for full year FY22 |
| Pre-tax ROCE (annualized) | 26%, vs 20% for full year FY22 |
| Capacity utilization | Closing to 70% |
| FY23 CAPEX guidance | ₹225 cr, of which ~₹150 cr is maintenance CAPEX |
| Expected debt reduction by Q4 FY23 | ~₹100 cr from current levels |
| Two-wheeler share of Aluminum Products | ~50% for FY23, expected 30-40% next year |
| Auto Powertrain exposure to passenger vehicles | ~10% of Auto Powertrain, ~5% of total company |
| Daimler portfolio impact from engine phase-out by FY24 | Low single digit of powertrain revenue; double digit by FY28 |
| Credit rating | Upgraded to A+ with stable outlook from A with stable outlook |