Key Takeaways
- Powertrain margin hit resets near-term expectations: Segment EBIT fell from ₹101 crores to ₹77 crores over four quarters as capacity expansion, underutilization, and refurbishment costs compressed profitability, with recovery tied only to operating leverage returning.
- Aluminum segment is the bright spot: DR Axion delivered ~40% QoQ growth on strong PV demand and a near-finalized Hyundai Talegaon order, though management sidestepped confirming the 20% CAGR guidance and margin sustainability.
- Growth narrative is back-end loaded to FY26: Multiple undisclosed Powertrain export and off-highway orders, the new Greenfield plant, and Aluminum export ramp-ups all point to FY26 as the year when investments begin converting to revenue at scale.
- Balance sheet is absorbing acquisition and capex: Debt rose on the ₹375 crores DR Axion outflow with no equity raised; management expects debt-to-EBITDA to hover around 1.5x while funding a modular ₹150-160 crores Greenfield phase.
- What to watch next quarter: Whether Powertrain margins begin normalizing as repair & maintenance costs ease, the trajectory of Aluminum segment margins as Stellantis ramps, and any concrete order announcements that de-risk the FY26 growth thesis.
Powertrain: The Margin Compression Story
- EBIT decline unpacked: The ₹101 crores to ₹77 crores drop over four quarters reflects a confluence of four factors: large new capacities in startup or beta stage, existing farm and CV capacities underutilized due to market conditions, higher fixed costs from the expanded base, and a conscious refurbishment push on 8-10 year old equipment that spiked repair and maintenance costs in Q2.
- Utilization is the core lever: New capacities have commenced production but existing capacities were not fully utilized in H1, leaving average operating capacity at only around 70% on Powertrain. Margin recovery depends on this number rising.
- R&M normalization expected: The other expenses increase was a deliberate catch-up on maintenance deferred during COVID and the post-COVID ramp-up; Q1 was slow, Q2 was when the work was done, and this should normalize from next quarter onwards.
- Near-term growth resets lower: Management acknowledged Powertrain hit a speed breaker where it cannot grow at 20-30%; growth will be low double-digit or high single-digit this year and next year, then pick up again in a bigger way from FY26.
- The FY26 pipeline is real but undisclosed: New localization opportunities from government support are expected to translate into business within two years, and management referenced "very important businesses which I cannot disclose now" that will come into production in FY26.
Srinivasan Ravi: "This is throwing new opportunities, new enquiries we are getting at pretty fast and rapid pace now. All this will translate into business within 2 years' time because the gestation period for approvals and the testing and the validation is a little long and we are close to getting some very important businesses which I cannot disclose now until we get the businesses and that will be coming into production in FY26 is what we look at in a big way."
Aluminum: The Growth Engine, With Unanswered Questions
- DR Axion delivered standout QoQ growth of ~40%: Driven by the Indian passenger vehicle market doing well, with both Hyundai-Kia and a ramping Mahindra contributing; growth was stronger than Hyundai-Kia wholesale numbers alone would suggest.
- Hyundai Talegaon order near-finalized: DR Axion has almost finalized a new order for Hyundai's new Talegaon plant, supplying the same parts as to the Chennai plant; this will add another 5-10% topline growth for DR Axion and 10% of Hyundai-Kia business when the plant becomes operational in FY25.
- Stellantis ramp-up has multi-quarter visibility: The ramp-up will continue every quarter for the next three quarters, expected to peak only in the September quarter of FY25; direct export of parts has not yet started and will begin in the next financial year.
- Management sidestepped two key questions: When asked whether the 20% CAGR guidance on the Aluminum segment on an FY24 base is still maintained, management did not answer; when asked if the 15% EBIT margin (implying 18-20% EBITDA) is sustainable, management again did not answer, addressing only growth drivers.
- Capacity headroom exists: DR Axion can take capacity 5-10% higher with marginal capex, with headroom for another 20% growth; a new Telangana plant will add around 10% increased capacity when it comes into operation in FY25.
- Direct exports are a FY25 story: Direct exports are negligible currently but expected to start next financial year, adding a new dimension to the segment's growth profile.
Industrial Engineering & Storage Solutions
- H1 was a pause, H2 looks strong: The storage solutions business was lower in H1 versus last year's H1, but H2 is looking very strong due to consolidation in the marketplace and a shift toward larger automated storage orders.
- Automated solutions will outgrow static racking: Management expects the automated solutions business to grow much faster than static racking, though both complement each other; the capex cycle, when it sets in India, is an opportunity Craftsman intends to capitalize on.
End-Market & Geographic Dynamics
- CV cycle is softening but structurally less vicious: The truck segment is cyclical, but replacement cycles have compressed to 5 years from 10-15 years because vehicles run 125,000-150,000 km annually with a 600,000 km life, creating continuous buying; next year will be "little soft" with growth returning in FY26.
- Tractor market is near peak domestically, but a global hub story is emerging: India is near the peak of what can be sold and sustained domestically, but multinationals are setting up shop in India as a global hub for diesel engines and tractors, which will drive growth for Craftsman.
- Brazil business is a near-term drag: H1 sales were ~30% lower for deemed exports to Daimler Brazil because the Brazilian economy is not doing well; Q3 FY24 will remain depressed but a pickup is expected from Q4 FY24. The business is protected until FY28-FY29.
- EV contribution remains negligible: Craftsman is a major supplier for two-wheeler EV, but the EV market size is very small today, so it is not a significant percentage of new business.
Competitive Positioning & The China Opportunity
- India is 5% of global casting supply, China is 50%: Some Chinese capacity is obsolete on lower-end products, creating headroom for Indian players to grow; India has only 10 leading foundries, and one Chinese foundry can be bigger than all of them combined.
- Three tailwinds favor India: Over-dependence on China, the geopolitical situation, sustained GDP growth, and a declining skilled workforce in Europe and North America are driving more outsourcing to India.
- Craftsman is building scale on machining and Aluminum: The company is not investing in foundry capacity where partners can supply; backward integration will only happen where there is a gap in capacity and an opportunity for end-use or export.
- Pricing is competitive, not premium: Profitability comes from scale, operational efficiency, and in-house process knowledge driving larger operating leverage, not from pricing power.
Srinivasan Ravi: "The pricing is not premium pricing, we are competitive in the market, and it is a competitive pricing. I think our scale and our efficiency and operations and our in house knowledge to manage the process is only leading to profitability with the larger operating leverage."
Capital Allocation & Balance Sheet
- Debt rose on the DR Axion acquisition: The ₹375 crores outflow sits on Craftsman's books with no equity raised; absolute debt may increase with Greenfield projects, but debt-to-EBITDA will continually come down and is expected to hover around 1.5x.
- New Greenfield plant announced: A 48-acre site near Coimbatore will house all three segments, mainly Powertrain and Aluminum; Phase-1 capex is ₹150-160 crores this year and another ₹100 crores in FY26, with trial production in Q2/Q3 of FY25 and revenue in FY26.
- Capital allocation will be modular: Management will not make one big leap; the order book will be full before the next step is taken.
- Backward integration is selective: More than a dozen foundries work with Craftsman, with three working very closely on their capacities; Craftsman will only invest in foundry capacity where partners cannot supply and where there is an end-use or export opportunity.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Powertrain near-term growth | Low double-digit or high single-digit growth | FY24 and FY25 |
| Powertrain growth re-acceleration | Rapid pace, high double-digit growth; potential to double or triple from current level | From FY26 onwards |
| Powertrain CAGR | 15-20% CAGR | FY21 to FY26 |
| Aluminum Stellantis ramp-up peak | Ramp-up complete every quarter; peak in September quarter | FY25 Q2 |
| Aluminum direct exports start | Direct exports to begin | FY25 |
| DR Axion Hyundai Talegaon order | Add 5-10% topline growth for DR Axion, 10% of Hyundai-Kia business | FY25 (plant operational) |
| New Greenfield plant Phase-1 | ₹150-160 crores capex; trial production Q2/Q3 FY25; revenue in FY26 | FY25-FY26 |
| Brazil business recovery | Pickup from depressed Q3 levels | Q4 FY24 |
| Debt-to-EBITDA | Hover around 1.5x | Ongoing |
| R&M cost normalization | Other expenses normalize as catch-up maintenance completes | Next quarter onwards |
| CV industry softness | "Little soft" next year; growth returns | FY26 |
| New OHV segment business (Powertrain) | Reflect in numbers | FY26 |
| Powertrain export orders (undisclosed large customer) | Bigger orders with higher validation cycles | FY26 |
Key Metrics
| Metric | Q2 FY24 / H1 FY24 |
|---|---|
| Standalone revenue (H1) | ₹1,700 cr |
| Standalone EBIT (H1) | ₹230 cr |
| Standalone EBIT margin (H1) | 15% |
| Consolidated value-add percentage | 47% |
| Standalone ROCE pre-tax annualized (H1) | 19% |
| Consolidated debt-to-EBITDA | 1.49x |
| Standalone debt-to-equity (H1) | 0.81 |
| Standalone debt-to-EBITDA (H1) | 1.72x, inclusive of ₹375 cr outflow for DR Axion acquisition |
| Net CAPEX (H1) | ₹258 cr |
| Full-year CAPEX guidance | ₹480 cr, comprising ₹320 cr for existing plants and ₹150–160 cr for Phase-1 of new Greenfield plant |
| Powertrain segment growth (H1) | ~7% |
| Powertrain utilization | ~70% |
| Aluminum standalone utilization | ~80% |
| DR Axion utilization | ~90% |
| DR Axion turnover (H1) | ₹635 cr |
| DR Axion EBIT (H1) | ₹95 cr |
| DR Axion value-add percentage | ~35% |
| Storage solutions revenue (H1) | ₹164 cr |
| Automated storage order book | ~₹100 cr |
| Automated storage share of storage solutions | 27% |
| Direct exports (Q2) | ₹57 cr, split as Powertrain ₹9 cr, Aluminum ₹13 cr, Industrial Engineering ₹35 cr |
| Standalone Aluminum business H2 run rate | ~₹500 cr |
| Standalone Aluminum business full-year FY24 estimate | ~₹900 cr |
| Powertrain segment mix (H1) | CV 57%, off-highway 18%, tractor 14%, SUV 11% |
| Aluminum standalone segment mix (H1) | 2W 66%, CV 7%, PV 7% |
| EBIT mix (Powertrain : Aluminum : Industrial Engineering) | ~45 : 45 : 10 |