Key Takeaways
- Acquisition-heavy quarter resets the base: Two acquisitions consolidated (Sunbeam, Fronberg), a QIP of INR 1,200 crores raised, and a new alloy wheel plant started production, all while standalone H1 performance dipped slightly on new-plant start-up costs.
- Industrial engineering margins troughed, recovery promised: Margins dropped significantly on legacy undercutting, but the automated solutions order book surged from INR 80 crores to INR 250 crores, and management expects margins to look up from Q3.
- Sunbeam turnaround is a FY26 story: The acquired aluminum die-casting unit will deliver no significant EBITDA in Q3, only marginal positive EBITDA in Q4, and targets high single-digit to low double-digit EBITDA next year after a INR 160 crores labor settlement.
- Consolidated revenue target set at INR 7,000+ crores for FY26: Blended EBITDA margin guided to 17-18%, with standalone at 18-19%, Sunbeam at 8-10%, and overseas subsidiaries at low single digits.
- What to watch next quarter: Whether industrial engineering margins actually recover as guided, the pace of Bhiwadi plant ramp-up toward 50-70% capacity, and any update on the Kothavadi foundry's engine block order book conversion.
Acquisitions & Integration
- Sunbeam acquisition closed, consolidated from October 9: Craftsman moved from an initial three-plant asset deal to a full company buyout. The unit has been EBITDA-negative for 3-4 years and carries a INR 160 crores labor settlement to be completed by March, with the first tranche leaving in November.
- Sunbeam synergy is customer-led, not cost-led: Craftsman and Sunbeam customers have practically no overlap. DR Axion operates in low-pressure and gravity die-casting, Craftsman in high-pressure high-tonnage, and Sunbeam in high-pressure low-tonnage plus some gravity/low-pressure, creating a complementary three-division aluminum platform.
- Sunbeam export potential is the hidden asset: New orders and RFQs had dried up due to the company's financial situation, but customers are returning with more inquiries now that Craftsman owns it.
- Fronberg acquisition completed October 1: The German foundry, now Craftsman Fronberg Guss GmbH, was bought to enter the large engine segment where China is 15 years ahead. The synergy model: Fronberg develops parts fast, and second incremental volume of the same parts is produced in India, giving customers two-site de-risking.
- Fronberg was bought against a customer's bid: Management stated one of Fronberg's key customers was "desperate" to buy the foundry, and Craftsman bid against that customer to win the asset.
- DR Axion 100% acquisition completed: Sales were weak this quarter; exports started in a small way and are expected to contribute for the full year next year, with this year more or less flat.
Srinivasan Ravi: "And that is -- the Fronberg will be able to develop the parts fast. And the second incremental volume of the same parts production will be done in India for the customer. So the customer is also happy that there will be two sites for the production of these parts going forward, which will also de-risk them."
Industrial Engineering: The Margin Recovery Bet
- Margins dropped significantly on legacy pricing: The stationary racking business suffered from undercutting and entry-cost pricing on old orders. Management states that undercutting is now over and new orders are coming at fair value, with margins expected to improve from Q3 onwards and full effect in Q4.
- Automated solutions order book surged 3x: The order book grew from INR 80 crores in April to INR 250 crores currently. These are long-gestation projects with 10-15 months from order to delivery, so revenue consistency will come only when the order pipeline crosses INR 300-400 crores.
- Automated storage carries a structurally better margin profile: These contracts have low commodity raw material content; bought-out items like electrical, electronics and mechanical components are price-fixed immediately, so commodity price changes do not significantly impact margins even without escalation clauses.
- The long-term blend is shifting toward higher-margin automated solutions: Management expects automated solutions and vertical lift modules to contribute the bulk of revenue over time, with the racking business supporting automated storage solutions rather than driving standalone revenue.
Aluminum Segment: Standalone Pressure, Consolidated Promise
- Standalone aluminum margins fell 140 bps QoQ to 11.8%: At the EBITDA level, margins are marginally lower at around 16%. Organic reasons like product mix shift account for 0.5-1% of the decline; extraordinary Bhiwadi plant expenses account for another 1-1.5%.
- Bhiwadi alloy wheel plant started commercial production end of August: Operating at 25% capacity currently, expected to reach 50-70% in Q4. Theoretical capacity is INR 400 crores, practical capacity INR 300-350 crores due to seasonal two-wheeler demand. The plant was set up without a JV partner, which management notes is rare.
- Kothavadi foundry is a FY27 story: Phase 1 focuses on general engineering castings for wind sector and machine tool parts, with an order book of INR 100 crores. Phase 2 is oriented toward cylinder blocks and heads for stationary engines, where the development cycle takes 18-24 months. Machining revenue starts FY26; casting revenue and significant engine block contribution only from FY27-28.
- INR 126 crores invested in Kothavadi so far: Another INR 70-80 crores needed to complete Phase 1. The engine block order book is "much higher" than INR 100 crores but will not contribute in FY26.
- Management declined to disclose value-addition by segment: An analyst asked for value-addition numbers across segments; management refused, stating no peers give this data and it has been "adverse" to the company, making the aluminum segment "more sensitive."
Srinivasan Ravi: "I have always been saying that the -- our aluminum competition outside the world between $1.5 billion to $6 billion, $7 billion in revenue. At least we are looking towards the INR 4,000 crores, which is $0.5 billion next year, approximately."
Sunbeam Turnaround: A One-Year Transition
- Q3 will have no significant EBITDA: Management cited holidays and a full workforce as reasons, expecting only marginal positive or negative EBITDA. Q4 will be slightly positive on EBITDA.
- FY26 target: high single-digit to low double-digit EBITDA: Revenue is expected to be more or less the same or slightly up from INR 1,200 crores. The turnaround is not quick; management said it will take one more year.
- Labor settlement of INR 160 crores to be fully paid by March: The first tranche leaves by November, with the bulk at the end of March. The Gurgaon plant will be shifted to Bhiwadi where Craftsman already has land, reducing plant overheads and freeing the Gurgaon land for sale.
- Higher operating expenditure persists until March: Sunbeam is carrying double operating expenditure from trying to ship the Gurgaon plant, plus higher salaries, which will continue to drag until the shift is complete.
Srinivasan Ravi: "I would rather only look at marginal EBITDA for Q4 going forward. Q3, I don't expect any EBITDA because of the holidays and the full workforce being there."
Balance Sheet & Capital Allocation
- QIP of INR 1,200 crores raised, allocated to capex: Proceeds will fund capex plans for the next two years. Management stated no large acquisitions are planned in the next two years; only small acquisitions in the INR 50-100 crores range if strategically beneficial.
- INR 700-800 crores from Gurgaon land sale already spent: The remaining QIP funds will go toward capex. Standalone debt is expected to close FY26 at around INR 1,600 crores, coming down to INR 1,200 crores after the land sale.
- Debt-to-EBITDA targets: FY27 standalone debt around EBITDA level at 1.2-1.3x. Group level at 1.3-1.4x EBITDA, with a long-term range between 1x and 1.5x.
- Capex will be very muted next year: After the current investment cycle, management signaled a significant step-down in capex intensity.
Srinivasan Ravi: "Then apart from this, the INR 1,200 crores is one step-up opportunity for making the company safer and more sustainable on the growth path for the next decade, I would say."
Competitive Positioning & Industry Context
- Scale is the competitive moat: Management argued that multinational customers cannot wait 2-3 years for equipment delivery when India lacks ready capacity, a dynamic China exploited. Craftsman's strategy is to put capacity ahead of demand.
- The foundry industry missed the export opportunity: Management noted that while the forging industry built capacity ahead of demand, the foundry business did not, and engine block casting for export "went away to China overall."
- Aluminum segment ambition: Management is targeting INR 4,000 crores in aluminum revenue next year, approximately $0.5 billion, positioning against global competitors in the $1.5 billion to $7 billion revenue range.
Srinivasan Ravi: "Overall, I cannot speak for any forging industry. But I would say that the vision was there to go ahead and put capacities ahead. But I would say the opposite has happened in the foundry business where nobody put up the capacities which could attract the attention of the -- for engine block casting for export, and that went away to China overall."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Consolidated revenue | Upward of INR 7,000 crores | FY26 |
| Blended EBITDA margin | 17-18% (standalone 18-19%, Sunbeam 8-10%, overseas low single digits) | FY26 |
| Industrial engineering margin recovery | Margins to look up from Q3, full effect in Q4 | Q3 FY25 onwards |
| Sunbeam EBITDA | No significant EBITDA in Q3; marginal positive in Q4 | Q3 and Q4 FY25 |
| Sunbeam EBITDA target | High single-digit to low double-digit | FY26 |
| Sunbeam labor settlement | INR 160 crores fully paid | By March 2025 |
| Bhiwadi plant capacity | 50-70% utilization | Q4 FY25 |
| Kothavadi machining revenue | Revenue to begin | FY26 |
| Kothavadi casting and engine block revenue | Significant contribution | FY27-28 |
| Standalone debt | INR 1,600 crores, reducing to INR 1,200 crores after land sale | FY26 close |
| Group debt-to-EBITDA | 1.3-1.4x, long-term 1x-1.5x | FY27 and beyond |
| Capex intensity | Very muted | FY26 |
| Large acquisitions | None planned | Next 2 years |
Key Metrics
| Metric | Q2 FY25 |
|---|---|
| Consolidated revenue guidance | Upward of ₹7,000 cr for FY26 |
| Standalone EBITDA drop (H1) | 8% to 10% YoY on an apple-to-apple basis |
| Standalone debt target | ₹1,600 cr by FY26-end, reducing to ₹1,200 cr after Sunbeam land sale |
| Group debt-to-EBITDA target | 1.3x to 1.4x in the near term, long-term range 1x to 1.5x |
| Standalone capex incurred (H1) | ₹467 cr |
| Standalone capex guidance (FY25) | ₹850 cr, excluding subsidiaries |
| Maintenance capex | ~₹200 cr annually |
| Extraordinary and pre-operative expenses (H1) | ~₹30 cr (₹10 cr+ acquisition costs, under ₹20 cr pre-operative), impacting standalone EBITDA |
| Sunbeam revenue | ~₹1,200 cr annual top line |
| Sunbeam employee cost | ₹270 cr to ₹280 cr on ₹1,200 cr turnover |
| Sunbeam labor settlement cost | ~₹160 cr to be completed by March |
| Sunbeam target EBITDA margin | 8% to 10% for FY26 |
| Sunbeam unabsorbed depreciation | ~₹440 cr, with ~₹100 cr tax saving expected going forward |
| Bhiwadi alloy wheel plant capex | ~₹150 cr incurred so far, plus ~₹130 cr for land on long lease |
| Bhiwadi plant revenue potential | ₹300 cr to ₹350 cr practical annual capacity; theoretical capacity ~₹400 cr |
| Kothavadi foundry capex | ₹126 cr incurred so far, with ₹70 cr to ₹80 cr remaining for Phase 1 |
| Kothavadi foundry revenue potential | ₹500 cr to ₹600 cr at 70%–80% utilization, with potential to reach ₹600 cr–₹700 cr |
| Order book – general engineering castings | More than ₹100 cr |
| Order book – engine blocks and heads | More than ₹100 cr, revenue expected from FY27 |
| Order book – automated storage solutions | ₹250 cr as of Q2 FY25 |
| Storage solutions revenue (H1) | ₹262 cr, with automated solutions contributing ~one-third |
| Standalone aluminum segment EBITDA margin | ~16% |
| Standalone aluminum segment EBIT margin | 11.8% in Q2 FY25 vs 13.2% in Q1 FY25 |