Key Takeaways
- Aluminum margins now sustainable: Start-up costs at Bhiwadi are behind the company, Hosur phase-I has begun commercial production, and operating leverage plus plant consolidation synergies are driving EBIT margin expansion.
- Powertrain mix de-risking CV: CV share fell from 49% to 46% QoQ while tractor and off-highway grew, making the segment less than 50% dependent on CV and insulating profitability from any CV slowdown.
- Order book supports ~20% CAGR: The order book points to around 20% revenue CAGR in coming years, with existing customers expanding capacity roughly 50% over the next three years.
- Kothavadi is the long-dated growth anchor: Phase-I is operational now for industrial castings; the $100 million revenue target by 2029 is on track, with over 50% of that order book already on paper and products under development.
- What to watch next quarter: The pace of Hosur alloy wheel ramp-up toward full 0.7 crore capacity by Q2 next year, Sunbeam's progress toward double-digit EBITDA in FY27, and any update on the Gurgaon land sale process.
Aluminum Segment: Margin Recovery & Capacity Build
- Start-up cost drag is over: Earlier Bhiwadi plant start-up costs depressed profitability for a couple of quarters; that phase is now behind the company. Hosur plant started operations, and its start-up costs are smaller relative to the larger base.
- Operating leverage driving margins: Better absorption of fixed costs as revenue scales, plus synergies from shifting Gurgaon facilities into Bhiwadi and operating Sunbeam's plant as one unit inside the Craftsman Bhiwadi area, are reducing average costs. Incremental revenue does not proportionally increase fixed cost.
- Alloy wheel ramp-up underway: Bhiwadi is already contributing to the top line; Hosur started commercial sales only a week before the call. Full operation of 0.7 crore capacity expected by Q2 of next year. Q4 will see reasonable sales from Hosur phase-I.
- Capacity utilization has headroom: DR Axion is stable and linked to 2-3 PV manufacturers; exports to Europe increased marginally. Utilization improved but room remains, and new CAPEX is still needed for different press sizes and seasonal peak demand.
- Outsourcing tailwind: Customers, especially in two-wheeler and PV, are increasing outsourcing versus insourcing as they gain confidence in the supply base.
Srinivasan Ravi: "these are sustainable margins, earlier the base was small when we tried to do the new Bhiwadi plant and that start-up operations cost actually really affected the equation of profitability for say a couple of quarters that is behind us now"
Powertrain: Mix Shift & Global Opportunity
- CV dependency falling: CV declined from 49% to 46% of Powertrain mix QoQ; tractor increased from 17% to 19%; off-highway from 20% to 21%. The company is now less than 50% dependent on CV, so a CV slowdown does not materially affect profitability.
- Multinationals setting up in India: After a two-to-three-year lull, multinationals from Japan, Europe and the US are establishing manufacturing bases in India with an eye on exports. Some have started to ramp up; others are slow because they have shut plants in their home countries.
- India as manufacturing hub: Outside China, India is becoming the largest manufacturing hub for domestic growth plus Middle East, Asia Pacific, African and South Asian markets. This spans tractors, Japanese engine manufacturers, two-wheeler exports, passenger cars with export intent, construction equipment, and now power generation as American companies shift manufacturing due to tariffs.
- Powertrain capacity utilization: Status quo; no new products added; each plant has set customers.
Kothavadi: The Long-Dated Engine Block Bet
- Phase-I operational now: Targeted at industrial engineering casting; customers like windmill players are already there. This is base business, not as remunerative as high-end engine blocks, but it keeps the foundry running while capacities for engine block manufacturing are built.
- Phase-II (large engine blocks) timeline: Engine validation takes around one and a half years. Certain customers are halfway through the cycle, others just starting validation. Commercial revenue from stationary engines will start in 2029.
- $100 million revenue target on track: Over 50% of the order book is on paper with products under development; the rest is in final-stage discussions. The target is for 2029.
- Entry barrier is real: Only around eight or nine companies globally have mastered the technology of the engine and its controls; four companies hold roughly 70% market share, and Craftsman is with three of those four.
Srinivasan Ravi: "Really speaking, this is one of the key entry barriers also for any supplier. So, it is not easy to start this business nor ramp up."
Sunbeam & DR Axion: Restructuring & Synergies
- Sunbeam restructuring complete: Union settlement was completed on 31st May; restructuring and shifting from Gurgaon to Bhiwadi took three months. The festive season delayed cost rationalization, but operational efficiency improvements are expected over the next two quarters.
- Double-digit EBITDA targeted for FY27: Revenue expected around the same region as current levels. Synergies with DR Axion and Craftsman's business will eventually bring margins to a level almost equivalent to the standalone engineering business.
- Sunbeam's product focus: Five plants, oriented more toward two-wheeler than passenger vehicle. New business had not come in for a few years due to their financial condition.
- DR Axion land acquisition: A larger piece of land has been taken for future expansion; the company is moving into cylinder blocks within the aluminum segment, and an order on hand requires CAPEX.
- Gurgaon plant vacated: December 31st is the last date of closing; from January onwards the land can be put up for sale. The sale process will run through the middle of next financial year.
Capital Allocation & Returns
- New CAPEX ROCE threshold: Minimum pre-tax return on capital of 20% for all new CAPEX. The lag from investment to peak revenue generation is 3-4 years.
- Standalone CAPEX of ~₹1,000 crores: Will start yielding results two to three years down the line. The new campus investment is a step change that will allow growth with marginal investment going forward, though setting up new campus infrastructure is expensive.
- INR 1,200 crores CAPEX (standalone + DR Axion): Will start yielding results in FY27.
- Net debt-to-EBITDA FY27: Expected to be closer to 2.0 on a consolidated basis.
- No large M&A in next 18 months: Small slump sales for technological areas are possible, but any large M&A is ruled out for the next 18 months. The company may look again in 2028 or 2029 if something suitable appears.
- Mature ROCE target: 20% ROCE at a mature level.
Srinivasan Ravi: "the new CAPEX is based on minimum 20% ROCE"
Data Center & German Subsidiary
- German subsidiary performing strongly: 90% of revenue goes to large engines for power generation, predominantly data center business. The plant is running very effectively, the order book is full, and revenue has increased. The trend of strong performance is expected to continue for a few more years.
- Data center revenue target: $100 million from India by 2029 or 2030, depending on product approval cycles. More than 50% is orders on hand; the balance is in an advanced state of negotiation. It takes around three years from order to revenue start.
- Technology moat in data center engines: Only around eight or nine companies globally have mastered the engine and control technology; four companies hold roughly 70% market share, and Craftsman works with three of those four.
Srinivasan Ravi: "the technology of an engine as well as the controls on the engine, only around eight or nine companies in the world have mastered it and four companies are having maybe 70% of the market share and we are with three of the four companies at least."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Kothavadi revenue target | $100 million | 2029 |
| Sunbeam EBITDA margin | Double-digit EBITDA | FY27 |
| Net debt-to-EBITDA (consolidated) | Closer to 2.0 | FY27 |
| New CAPEX minimum ROCE | 20% pre-tax | All new CAPEX going forward |
| Alloy wheel full capacity | 0.7 crore capacity in full operation | Q2 of next year |
| Data center revenue target | $100 million from India | 2029 or 2030, depending on product approval cycles |
| Kothavadi phase-II (large engine blocks) | Commercial revenue start | 2029 |
| No large M&A | Ruled out in a big way | Next 18 months |
| Gurgaon land sale process | Completion | Middle of next financial year |
| Standalone + DR Axion CAPEX yield | INR 1,200 crores CAPEX starts yielding results | FY27 |
Key Metrics
| Metric | Q2 FY26 |
|---|---|
| Consolidated revenue | ₹3,786 cr (H1 FY26), vs ₹2,365 cr in H1 FY25 |
| Powertrain revenue | ₹2,034 cr (H1 FY26) |
| Aluminum Products revenue | ₹2,275 cr (H1 FY26) |
| Industrial Engineering revenue | ₹476 cr (H1 FY26) |
| Consolidated EBITDA | ₹582 cr (H1 FY26) |
| EBITDA margin | ~15% (H1 FY26) |
| EBIT margin | ~10% (H1 FY26) |
| ROC (annualized) | 15% |
| Net debt | ₹2,800 cr |
| Net debt-to-EBITDA (consolidated) | 2.46x (H1 FY26 annualized) |
| Net debt-to-EBITDA (excl. lease liabilities) | 0.94x |
| CAPEX guidance (FY26) | ~₹1,000 cr for Craftsman standalone; DR Axion CAPEX depends on land acquisition |
| DR Axion CAPEX announced | ₹280 cr for new plant expansion |
| Powertrain segment mix | CV 46%, off-highway 21%, tractors 19%, PV/SUV 14% |
| Sunbeam quarterly revenue run rate | ₹330 cr |
| Sunbeam EBITDA margin | ~6% |
| German subsidiary (Fronberg Guss) revenue | ₹158 cr (H1 FY26) |
| German subsidiary PAT | ~₹8 cr (H1 FY26) |
| Kothavadi data center order book | $50 million on paper received, out of $100 million target |
| Alloy wheel installed capacity | 0.58 cr wheels (Bhiwadi + Hosur); phase-II to add 0.2 cr |
| Automotive share of consolidated revenue | ~80% |