Key Takeaways
- Growth guidance intact despite headwinds: Consolidated revenue growth guided at high teens to 20% for FY25, even as the quarter faced Red Sea disruptions, export stagnation, and a shrinking storage market.
- Margin compression is cyclical, not structural: Powertrain and Industrial & Engineering margins dipped on capacity under-utilization and price pressure; management expects recovery as storage demand returns in FY26 and refurbishment ends.
- A capex super-cycle is beginning: Two new plants (Kothavadi, NCR) plus a foundry mark a shift toward large-part machining and import substitution, with peak revenue potential of INR300 crores from the NCR unit alone.
- M&A strategy is pivoting abroad for the first time: Management is actively evaluating small/medium overseas acquisitions that offer strategic advantage with negligible risk, a departure from its domestic-only history.
- What to watch next quarter: Whether the NCR land allocation letter arrives and triggers fast-track capex, the pace of Powertrain refurbishment completion, and any LOI on the Industrial & Engineering casting backward-integration order.
Growth Outlook by Segment
- Powertrain: High single-digit growth in FY25, then a step change to very high double digits by FY27 as new product development cycles resume and latent capacity fills. The Stellantis order book has shrunk from INR200 crores to INR30-40 crores due to customer-specific headwinds, not supply issues.
- Aluminum Products: High teens growth in FY25, possibly 20%; with the new north facility, FY26 is guided at 20% on a higher base. Two-wheeler demand is strong even as passenger vehicle orders from certain customers have not picked up materially.
- Industrial & Engineering: 15% growth expected in FY25 despite Storage Solutions being flat. The real acceleration comes from large-part machining for construction equipment multinationals now focusing on India, with samples already started and revenues kicking in from H2 next year.
- Storage Solutions: Market has shrunk double digits; Craftsman held revenue at ~95% of the year-ago nine-month figure despite stiff price competition. Recovery is expected only in FY26, at which point margins should improve sharply on better utilization and pricing.
- Exports: Direct exports are flat, pressured by recession in some countries, elections, inventory corrections, and conflict-related logistics costs. Tier II exports outside the Brazil Daimler order have improved. Brazil Daimler itself faces a market shift toward heavy duty, away from the medium-duty segment Craftsman serves.
Srinivasan Ravi: "We have grown from a smaller base to a very high base at a very high trajectory going forward."
Capacity Expansion: Kothavadi & NCR
- Kothavadi (Coimbatore-scale campus): A 50-acre composite plant housing all three business segments. Construction has started; a cast iron foundry for Industrial & Engineering comes first, then heavier Powertrain castings. Parts will range from 1 ton to 10 tons each, targeting wind energy, capital goods, and large construction equipment. Startup production is 24-30 months away, with efforts to fast-track.
- NCR region plant: A composite unit within 100 km of major auto and Storage Solutions customers, with Aluminum as the first business. Proposed investment is INR150 crores in land, building, and machinery. First full-year revenue is guided at INR200 crores, with peak potential of INR300 crores. Land has been allocated via a Rajasthan industrial auction; the allocation letter is expected imminently.
- Strategic logic: Both plants answer multinational customers' complaint that Indian suppliers lack scale, forcing them back to China. Management is positioning Craftsman as an agile, quick-development machining partner to capture the outsourcing trend expected to become visible in 2-3 years.
Srinivasan Ravi: "The only complaint we keep hearing from customers: there is no scale in the country. They're disappointed. We still have to go back to China. So that is what we at Craftsman also wanted to change."
Margin Walk & Pressures
- Powertrain margin decline: Driven by three factors: under-utilized capacity (fixed cost on machining not done), manpower cost inflation that cannot be passed on, and existing products exiting the market requiring changes. Depreciation rose ~INR11 crores in Powertrain alone, reflecting readiness for the next growth phase.
- Industrial & Engineering margin decline: Capacity utilization fell; Storage Solutions faced a double-digit market contraction with severe price pressure on available orders. The segment held 95-98% of its year-ago nine-month revenue, but at the cost of margin.
- Aluminum margin stability: Core standalone Aluminum margins dipped post-festive season as products stopped and capacity increased, but year-on-year the business operates in a 16-18% EBITDA margin band. Management expects to hold that range as long as growth stays at 15-20%.
- Recovery path: Powertrain margins normalize to repair-and-maintenance levels after Q4/Q1 refurbishment ends (70% done, balance 25-30% in Q4 and partially Q1). Industrial & Engineering margins should improve in FY26, though new capex will initially depress margins via depreciation, similar to Aluminum's experience four years ago.
Import Substitution & New Order Wins
- Cylinder block for an SUV manufacturer: Supplies started last month for a leading model's block previously imported from Italy. This is a direct import substitution win.
- Industrial engine machining orders: Secured for parts where castings come from outside India; samples have started and revenues begin in H2 of next year. These are large, sticky orders given the customer's investment in validation, testing, and tooling.
- Backward integration into castings: Management is very close to negotiating and receiving an LOI in the next few months for sizable casting orders, which would deepen the value chain for Industrial & Engineering.
Srinivasan Ravi: "These are difficult to get business, not easy to get and also very, very sticky business going forward because of the huge investment, which is being made by the customer also in terms of validation, testing and the tooling cost."
Capital Allocation & Balance Sheet
- Debt comfort: Management is comfortable at 1.6x debt-to-EBITDA; if capex slows, the ratio will come down to 1:1. An equity raise is not favored because it would dilute EPS, though an enabling resolution for M&A (domestic and possibly outside India) may be sought.
- FY24 capex: Around INR500 crores.
- FY25 capex: Dependent on north plant orders; if large orders are concluded before June, the 18-24 month project may be fast-tracked. Land investment is partial, paid over 12 quarters.
- M&A pivot abroad: For the first time, management is evaluating small/medium acquisitions outside India where they offer strategic advantage and negligible risk. The trigger: multinationals setting up plants in India, creating an opportunity for Craftsman to acquire the European supplier already serving them and bring that capability onshore.
Srinivasan Ravi: "Now we see the winds of change coming in, where the multinationals are going to set a plant here. So it may help that we are getting the actual supplier who is supplying in Europe to service them within India."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Consolidated revenue growth | High teens to 20% | FY25 |
| Powertrain revenue growth | High single digit | FY25 |
| Aluminum Products revenue growth | High teens, if not 20% | FY25 |
| Aluminum Products revenue growth | 20% on a higher base | FY26 |
| Industrial & Engineering revenue growth | 15% (despite flat Storage Solutions) | FY25 |
| NCR plant first full-year revenue | INR200 crores | First financial year after commissioning |
| NCR plant peak revenue | INR300 crores | Undated |
| Kothavadi plant startup production | 24-30 months from now, fast-tracked | ~FY26-FY27 |
| Storage Solutions market recovery | Market returns, margins improve sharply on utilization and pricing | FY26 |
| Off-highway business revenue start | Small portion in FY26; facility installation 12-20 months, tooling 12 months, validation 6-12 months | FY26 onwards |
| Powertrain growth step change | Return to old high double-digit growth rate | By FY27 |
| Aluminum EBITDA margin band | 16-18% sustained | As long as growth is 15-20% |
| FY24 capex | ~INR500 crores | FY24 |
| FY25 capex acceleration trigger | Fast-track north plant if large orders concluded | Before June |
Key Metrics
| Metric | Q3 FY24 |
|---|---|
| Consolidated 9-month turnover | ₹3,346 cr, vs ₹2,202 cr previous year (not strictly comparable due to DR Axion consolidation) |
| Consolidated 9-month EBITDA | ₹684 cr, vs ₹503 cr previous year |
| Consolidated 9-month EBITDA margin | ~20% |
| Consolidated 9-month EBIT margin | 14% |
| Consolidated 9-month PAT margin | 8% |
| ROCE pre-tax | 23% |
| ROE annualized | 23% |
| EPS not annualized | ₹114 per share |
| Debt-to-equity | 0.86 times |
| Debt-to-EBITDA | 1.59 times |
| Standalone 9-month turnover | ₹2,385 cr, vs ₹2,195 cr previous year |
| Standalone 9-month EBITDA | ₹503 cr, vs ₹499 cr previous year |
| Capex up to December 2023 | ₹395 cr |
| Q3 value-add, Powertrain | ₹237 cr |
| Q3 value-add, Aluminum | ₹97 cr |
| Q3 value-add, Industrial & Engineering | ₹73 cr |
| Storage Solutions Q3 revenue | ₹97 cr, vs ₹80 cr in Q3 FY23 |
| Storage Solutions 9-month turnover | ₹261 cr, vs ₹271 cr previous year |
| Direct exports | ₹161–165 cr, no growth |
| Industrial & Engineering EBIT margin | ~6.9% |
| Depreciation increase in quarter | ~₹11 cr, bulk from Powertrain area |
| Powertrain gross block | ₹2,169 cr |
| NCR plant proposed investment | ₹150 cr in land, building and machinery |
| NCR plant mature sales target, first full year | ~₹200 cr |
| NCR plant peak revenue potential | ₹300 cr |
| Aluminum Products combined annual run rate (with DR Axion) | ₹2,200 cr |
| Stellantis order book | ₹30–40 cr, downsized from initial ₹200 cr |
| FY24 full-year capex guidance | ~₹500 cr |
| Powertrain FY25 growth outlook | High single digit |
| Aluminum consolidated FY25 growth outlook | High teens to 20% |
| Industrial & Engineering FY25 growth outlook | ~15% |