Key Takeaways
- Aluminium margins dip on startup costs: Standalone aluminium EBIT margins fell ~500 bps QoQ, driven by the new Shoolagiri plant's operational losses and product mix shifts; management expects continuous improvement from Q4.
- Sunbeam restructuring crosses halfway mark: The heavy lifting is over, with the critical 50% point crossed; Q4 EBITDA is guided above 10%, and the exit run rate will be much higher as new business ramps.
- Stationary engines target $100 mn by FY29/30: A once-in-a-lifetime OEM capacity race underpins the Kothavadi project; the remaining $30-40 mn of orders should tie up next year, with peak market demand seen by 2030.
- Debt path tied to growth, not a fixed year: Management declined to give a specific FY27 reduction figure, instead offering a scenario: 5% growth clears debt in 4 years; steady-state 8-10% growth keeps debt-to-EBITDA at 1-1.5x.
- What to watch next quarter: Whether aluminium margins begin their promised sequential recovery, the pace of Sunbeam's margin exit-rate improvement, and any firming of the CV powertrain green shoots into sustained growth.
Aluminium Segment: The Margin Reset
- Shoolagiri startup hit: The new plant incurred operational losses in its first quarter to prove out parts; production has started, and a ramp-up to optimal levels is expected by Q2. This was a one-time drag on segment margins.
- Product mix and utilization: Beyond the new plant, margins were also compressed by OEM annual maintenance shutdowns post-festive season, inventory correction, new products running at suboptimum levels, and December under-utilization of recently increased capacities.
- Commodity pass-through optics: A violent upward surge in aluminium prices, plus rupee depreciation-driven secondary aluminium volatility, inflated the revenue denominator while the absolute value-add spread stayed constant, optically compressing the margin percentage.
- Pricing mechanism: Craftsman never quotes on a per-tonnage basis; aluminium is a calculated material cost pass-through. Some customers adjust immediately, others with a 1-2 month lag, so the optical margin distortion unwinds with a delay.
- Recovery trajectory: Management guided that aluminium margins will improve continuously from Q4 onwards and moderate at a higher level on an annualized basis. Alloy wheel margins, currently below high single-digit, are expected to reach double-digit or high single-digit by Q3 next year, when utilization crosses 60-70%.
Srinivasan Ravi: "The model of percentage of revenue as the margin, I think it doesn't hold good for many reasons... artificially, it looks like the margin reduces."
Sunbeam Restructuring: Inflection Point
- Restructuring status: The heavy weight lifting is over and the most critical 50% point has been crossed; the journey to improve continues from here. All three teams (Craftsman, Sunbeam, Fronberg) exhibited together at the EUROGUSS exhibition in Nuremberg two weeks ago.
- Portfolio rationalization: Sunbeam sold its aluminium piston asset (INR 30 cr revenue, 2 customers) to Shriram Pistons. Approximately 10 customers representing 5% of revenue are being exited with 3-6 month notices. The focus narrows to 4-5 customer groups contributing 95-97% of revenue.
- Margin guidance: Q4 EBITDA will be higher than 10%, and the exit run rate will be much higher. New business is expected to start in coming quarters, with margins improving from Q2 next year.
- Export potential: The restructuring and integration are unlocking increased potential for exports going forward.
Srinivasan Ravi: "Three headlines. One is the heavy weight lifting of Sunbeam is over, but we have crossed the most critical point of 50% and now it is a journey, which will continue to improve."
Stationary Engines & Data Centers: The Capacity Race
- Kothavadi demand driver: The project serves a unique, once-in-a-lifetime requirement for OEMs manufacturing a product where fewer than 10 companies exist worldwide. These OEMs are racing to create capacity, and the trust to outsource a part previously made in-house is itself a major step. An FTA is not a factor for this top-of-pyramid product.
- Revenue target: Management targets $100 million in stationary engine revenue by FY29/FY30. The balance $30-40 million of orders is expected to be tied up in the next year or so, with peak market requirement seen by 2030.
- Data center tailwind: Even if the current spike moderates, energy demands from data centers will keep growing. India is well positioned for this technological growth, and there is not much capacity in Europe or North America to serve it.
- Fronberg validation progress: The first phase of validation for critical parts supply is complete; the second phase is ongoing. First invoicing will start in 1-1.5 years. The Fronberg acquisition also provides insight into European capacities.
Srinivasan Ravi: "Once we are into this elite league of this supply of these critical parts, I think there is many... a lot of validation required to onboard a supplier. We are through with the first phase. Second phase is on now."
Powertrain: Green Shoots After a Muted Cycle
- CV recovery emerging: The commercial vehicle segment has been muted for two years and is now showing green shoots of marginal growth. Tractors are doing very well this fiscal. An interesting shift is underway as CVs move to higher engine capacities (400+ hp, 700-800 Nm), which increases per-vehicle content for Craftsman.
- Tractor content rising: The benefit is not only from volume growth but also from an increase in average horsepower, which lifts the value of components supplied per unit.
- Capacity and investment: 5% to 10% capacity addition is planned in the next 12 months starting from January. Management will continue to invest in powertrain for the next 5 to 10 years. Revenue growth is expected in the high single-digit to low double-digit range.
- New product pricing advantage: The upcoming new Labour Code requires more automation; Craftsman is prepared with automation investments. New products allow pricing from scratch at current capex levels, yielding reasonable pricing compared to legacy contracts.
Industrial & Engineering: Operating Leverage Play
- Margin sustainability: Margins are sustainable and expanding through operating leverage. Craftsman is the second-largest player in static racking in India and among the two largest Indian players in automated storage.
- Market structure favorable: The market is growing and the supplier base has consolidated. The top 5 players have clear segregation, eliminating the need for a price-cutting strategy. Better purchasing power from steel is an additional tailwind.
- Growth and utilization: Revenue growth is expected in the high single-digit to low double-digit range. Optimum plant usage should be reached in the next 2-3 quarters, driving further margin expansion in the next financial year.
Balance Sheet & Capital Allocation
- Debt-to-EBITDA framework: Management considers below 2x comfortable and aims to stabilize at 1.5x after the big growth cycle. At steady state with 8-10% growth, debt-to-EBITDA is expected between 1x and 1.5x.
- Debt reduction scenarios: If growth runs at 5%, it will take 2 years to reach debt-to-EBITDA of 1:1, and another 2 years at 5% growth to eliminate debt entirely. Management declined to provide a specific FY27 reduction figure or current absolute debt levels.
- Working capital: The aluminium price increase will have a marginal 10-15% impact on working capital requirements.
- Land sale: Craftsman is engaged with multinational companies and evaluating offers for the best possible price; it is not in a hurry to sell at a lower price.
- DR Axion margin trajectory: Current 20% EBITDA margins will face a hit when the new plant comes into operation, with two quarters of pre-operative costs and suboptimum utilization. Over 3-4 years at full capacity, margin expansion will occur as older projects come down.
Srinivasan Ravi: "If we grow at 5%, it will take only 2 years to get to debt-to-EBITDA of 1:1. And another 2 years, we grow at 5%, the debt will be gone totally."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Aluminium margin recovery | Continuous improvement from Q4; annualized moderation at higher level | From Q4 FY26 |
| Alloy wheel margins | Reach double-digit or high single-digit | By Q3 next year |
| Alloy wheel utilization | Reach 60-70%+ | By Q3 next year |
| Sunbeam Q4 EBITDA | Higher than 10% | Q4 FY26 |
| Sunbeam margin improvement | Margins improving, exit run rate much higher | From Q2 next year |
| Stationary engines revenue | $100 million | FY29 / FY30 |
| Stationary engines order tie-up | Balance $30-40 million orders tied up | Next year or so |
| Powertrain capacity addition | 5% to 10% addition | Next 12 months from January |
| Industrial & Engineering optimum utilization | Optimum plant usage | Next 2-3 quarters |
| Industrial & Engineering margin expansion | Margin expansion from operating leverage | Next financial year |
| Debt-to-EBITDA at steady state | Between 1x to 1.5x | At steady state (8-10% growth) |
| DR Axion margin hit | Two quarters of pre-operative costs and suboptimum utilization | When new plant comes into operation |
| DR Axion margin expansion | Margin expansion as older projects come down | Over 3-4 years at full capacity |
Key Metrics
| Metric | Q3 FY26 |
|---|---|
| Consolidated revenue segment mix | Passenger vehicle 34%, 2-wheeler 24%, commercial vehicle 12%, storage 9%, tractor ~4%, off-highway ~5%, other Powertrain 4% |
| Powertrain segment quarterly run rate | ~₹450 cr |
| Aluminium standalone EBIT margin contraction | ~500 bps QoQ |
| Industrial & Engineering segment EBIT margin | Sharp jump, sustainable with further expansion expected |
| Overall operating margin | ~15% to 15.3% for last 2 quarters |
| Consolidated net debt to EBITDA | 2.55x, on a 9-month annualized basis |
| Return on capital employed (pre-tax) | ~16% |
| Return on equity (annualized) | ~12% |
| Stand-alone capex for FY26 | ~₹1,000 cr |
| Sunbeam EBITDA margin | ~7% for current year, exit run rate Q4 higher than 10% |
| DR Axion EBITDA margin | 20% currently |
| Alloy wheel capacity utilization | Not even 50% of installed capacity |
| Stationary engines order book | Inching towards ~$60 million annual level, target $100 million revenue for FY29/FY30 |
| Aluminium prices | Jumped ~16% from $2,800 to ~$3,050, highest since April '22 |
| Sunbeam aluminium piston asset divested | ~₹30 cr revenue, 2 customers |
| Land held for sale (book value) | ~₹350 cr |