Key Takeaways
- Margin reset, not a structural break: Powertrain margins fell ~300 bps QoQ as heavy capacity investment met flat revenue; management frames this as a pre-revenue drag that unwinds as new programs ramp.
- Aluminum is the bright spot: Standalone and DR Axion aluminum margins improved on better mix (98% machined), higher utilization, and synergy capture, with 15% standalone growth reaffirmed for FY25.
- Two greenfield plants anchor the next cycle: A 50-acre multi-specialty foundry at Kothavadi and a hybrid aluminum plant at Bhiwadi are under construction, with revenue starting H2 FY26 and steep growth in FY27.
- The big bet is off-highway and heavy engines: Management targets at least $100 mn in new powertrain revenue from off-highway/stationary engines over 4–5 years, a segment where the addressable market is multiples of Craftsman's current size.
- What to watch next quarter: Whether Q1 delivers the promised cost relief from completed repair and maintenance, the pace of export order offtake in aluminum, and any concrete fundraising timeline.
Powertrain: The Margin Reset and the Off-Highway Bet
- Q4 margin compression was investment-led, not demand-led: Fixed costs rose on large capacity expansion while the top line did not improve commensurately; the new Faridabad plant is ready for Stage 5 production which has not started, exports did not pick up as expected, and heavy investment in off-highway product machining and backward integration into casting has generated only expenses, no revenue.
- Repair and maintenance catch-up nearly done: 80% of refurbishment and maintenance work is complete, with perhaps one more quarter left; FY19 was a high year, COVID deferred work, and the post-COVID ramp-up left no room for maintenance, so a lean year was used to catch up.
- Current powertrain business flattish, new business provides the growth: Management expects high single-digit or low double-digit growth in FY25, driven by a small portion of new business clicking this year while the existing base stays flat.
- CV demand subdued through FY26: Commercial vehicle demand has been subdued for six months and the outlook remains muted for most of FY25 and part of FY26; the step-change comes from FY27 onwards when higher horsepower engines (350–450 HP vs the current sub-250 HP norm) enter the market.
- The off-highway and stationary engine opportunity is material: Orders have been won but not disclosed; these are sticky, global, mostly export-oriented businesses that will kick in from FY26 with good traction until FY28. Management targets at least $100 mn in incremental powertrain revenue from this segment in 4–5 years, against an addressable stationary engine market of $3.2 bn where Craftsman is "very miniscule."
- Engine horsepower migration is the structural driver: 98% of engines sold in India are 6.7-liter versus over 80% globally at 13-liter; the shift to bigger engines, bigger gearboxes, and more fuel-efficient trucks is what grew Craftsman's per-vehicle content over the last 4–5 years and is the big growth driver from FY27 onwards.
Srinivasan Ravi: "We have invested heavily for off-highway products machining, and also now we are also backward integrating to a certain extent on the casting front. So that has not seen any revenue. There have been only expenses which has been expensed off because these products are a long gestation for development itself."
Aluminum: The Margin Story Working
- Standalone aluminum margins improved on multiple levers: Product mix is 98% machined with critical machining and higher value addition; capacity utilization improved, driving better fixed cost absorption.
- DR Axion synergies are playing out: Revenue ramp-up and synergy-driven cost management in the acquired company helped margins; the 20%+ level reflects efficiency measures put in place over the last 3–4 quarters and the addition and ramp-up of a customer.
- DR Axion QoQ revenue decline was a one-off inventory correction: A major SUV manufacturer in the western region, a customer for both DR Axion and Craftsman, had a very steep inventory correction in Q4 after ramping up for higher numbers.
- Export orders provide near-term visibility: Export orders for PV aluminum start from Q1, with offtake expected from Q2 and peaking in Q3/Q4; DR Axion has a three-year export contract to Korea expected in Q4 of this year, and the Hyundai Talegaon plant will add revenue when operational in FY26.
- Standalone 15% growth reaffirmed for FY25: Strong order booking across Coimbatore, Bangalore, and DR Axion plants supports YoY growth on organic brownfield through FY25, FY26, and even FY27.
- DR Axion margin sustainability is qualified: Management flagged that repair and maintenance, modernization, semi-automation, increased depreciation, and dependence on utilization, power and fuel cost, wage inflation, and new customer orders will all influence margins around the current 20%+ level.
Greenfield Expansion: Kothavadi and Bhiwadi
- Two plants under construction, both customer-committed: Construction started in H2 of the year after receiving customer commitments; capex for FY25 is slightly above ₹500 cr, covering stage one of both facilities plus general maintenance and normal capacity balancing across all 13–14 plants.
- Kothavadi (Coimbatore): A 50-acre multi-specialty hybrid foundry for cast-iron parts weighing 1 ton to 20 tons, also addressing renewable energy via windmill gearbox housing machining, with backward integration into casting. Validation takes 6–9 months; revenue starts Q3/Q4 FY26 with a steep growth trajectory in FY27.
- Bhiwadi (Rajasthan): A hybrid plant starting with aluminum products and structural products for EV or non-EV end use, reducing dependency on ICE-related parts for the standalone business. Trial production starts in FY25; 50% capacity is already booked for orders and will be utilized in FY26.
- Bangalore facility running out of space: Management indicated one more location in the south may be needed apart from Bangalore due to rising customer demands, to come in phases.
- A small overseas acquisition is being explored: Possibly much less than ₹100 cr, aimed at giving a strategic advantage in a key business.
Srinivasan Ravi: "Now what happens if we don't grow or we grow late? We grow late, we may miss the bus on the business. As and when we get an opportunity, we have to grab that opportunity and move ahead. Otherwise, we will be stuck with the growth of the existing customers, where then we have to answer that our customers did not pick up the material."
Industrial Engineering: Storage Flat, Renewables a New Stream
- Storage business was flat year-on-year: E-commerce customers stopped investing entirely in the last financial year, but management still held the top line in that area; storage accounts for 50% of the industrial engineering segment.
- Margins declined on fixed cost under-absorption: The business is ready for more expansion but revenue did not materialize; contract manufacturing and other non-storage products saw little traction, and the small base means small capacity utilization changes swing margins significantly.
- Storage growth and margin recovery expected in FY25: Management is confident of growing the storage business 25–30% in the current year, with margins expected to come back with a better revenue mix.
- Renewable energy revenue has started flowing: Gearbox housing machining for windmills is a new revenue stream that will bring full-year revenue in FY25, with backward integration into casting at Kothavadi adding further depth.
- Base metal prices are a tailwind for mining-linked demand: Copper and base metal prices have shot up, and mining activity is expected to increase.
Balance Sheet and Capital Allocation
- Fundraising to de-leverage: The company decided to reduce debt by raising funds via public markets; only an enabling resolution has been taken forward, with the modality and timing still uncertain.
- Inventory is optically high but pass-through: ₹1,000 cr of inventory covers all three segments, including steel for the long-gestation storage solution business; it is a pass-through for customers with no impact on profitability, though it optically depresses EBITDA margin.
- Management declined to provide a deleveraging blueprint: When asked for cash flow generation estimates from the two new plants and a deleveraging roadmap, management gave a general explanation about capital allocation philosophy and said, "I don't want to talk about number."
- Capex allocation by segment was not disclosed: Management called it a "very, very difficult question" because infrastructure is shared across three segments and allocation will be determined by order portion and actual usage.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Standalone aluminum growth | 15% growth | FY25 |
| Storage business growth | 25–30% growth with margin recovery | FY25 |
| Powertrain growth | High single-digit to low double-digit | FY25 |
| Capex | Slightly above ₹500 cr, completing stage one of Kothavadi and Bhiwadi | FY25 |
| Bhiwadi trial production | Trial production starts; 50% capacity utilized, already booked | FY25 start; FY26 utilization |
| Kothavadi revenue start | Revenue begins Q3/Q4, steep growth trajectory thereafter | FY26 (H2) into FY27 |
| Off-highway/stationary engine revenue | At least $100 mn incremental powertrain revenue from this new business | 4–5 years |
| CV step-change | Higher horsepower engines (350–450 HP) drive next growth leg | FY27 onwards |
| DR Axion export order (Korea) | Three-year contract expected | Q4 of current year |
| Hyundai Talegaon plant contribution | Operational and adding revenue | FY26 |
Key Metrics
| Metric | Q4 FY24 |
|---|---|
| Consolidated revenue | ₹4,452 cr (FY24), vs ₹3,183 cr in FY23, not strictly comparable due to partial consolidation of DR Axion |
| Consolidated EBIT | ₹619 cr (FY24), vs ₹475 cr in FY23 |
| EPS | ₹144 (FY24), improved from ₹117.56 in FY23 |
| ROCE | 22% (FY24), declined from 22.3% in FY23 |
| ROE | 21% (FY24), improved from 19.5% in FY23 |
| Debt-to-equity ratio | 0.88 |
| Capex | ₹580 cr (FY24), higher than envisaged due to two new greenfield plants |
| FY25 capex guidance | Slightly above ₹500 cr, for completing stage one of Bhiwadi and Kothavadi plants |
| Powertrain revenue mix (FY24) | CV ₹880 cr, Off-highway ₹272 cr, Tractor ₹210 cr, SUV (PV) ₹196 cr |
| Powertrain revenue mix (Q4 FY24) | CV ₹217 cr, Off-highway ₹63 cr, Tractor ₹48 cr, SUV (PV) ₹61 cr |
| DR Axion turnover | ₹1,246 cr (FY24), EBIT ₹196 cr |
| DR Axion margin | 20% plus, reflecting efficiency measures; management expects margins around these levels plus or minus going forward |
| Storage solutions opening order book | ₹200 cr as of April 1, 2024, vs negligible ₹60–70 cr at start of FY24 |
| Storage business growth expectation | 25–30% in FY25 |
| Off-highway and industrial engines revenue target | At least $100 million incremental revenue in 4–5 years |