Key Takeaways
- Mid-teens growth guided, margin story deferred: FY27 revenue growth pegged at "truly double digit, most probably in the mid-teens," but aluminum margins will stay depressed as fresh capex offsets gains from newly installed capacity.
- Aluminum is the $1 bn ambition with a margin catch: The segment is on a path to $1 billion revenue in 2-3 years, yet management explicitly ruled out 100-200 bps EBIT margin improvement next year because the next round of capex will again "spoil margins."
- Sunbeam restructuring is a deliberate reset, not a quick fix: Exiting unviable customers and a ₹30 cr low-value line will drop utilization from 70% to 45-50% before new business fills the gap; results expected only from Q2 FY27.
- Manpower cost inflation is the real sleepless night: Contract labor at <$1/hour is expected to double or triple, and management sees this as harder to pass on than debt service; automation and high depreciation provide only a partial offset.
- What to watch next quarter: Whether Sunbeam's margin reset shows traction, the September decision on Stationary Engine Phase 2, and any firming of FY27 capex numbers beyond the current "not clear yet" stance.
Aluminum Business: The Growth Engine with a Margin Overhang
- Revenue trajectory: The segment is targeting approximately ₹6,500 crore in FY27 (management called this an "approximation, not guidance") and $1 billion in 2-3 years at current aluminum prices, driven by alloy wheel ramp-up and casting+machining value-add.
- Alloy wheel capacity: Bhiwadi Phase 1 is fully operational, Shoolagiri and Hosur started in Q3 FY26, and the March exit run rate annualized at ~0.3 crore wheels; current capacity is more or less sold.
- Phase 2 on hold: Management will not decide on further alloy wheel expansion this financial year, waiting to assess commodity price pass-through and import competition after BIS norms settle.
- Margin stagnation explained: Significant capex done last year is not yet yielding full-quarter or full-year revenue; 20% capacity growth against 5% revenue growth depresses margins, and future capex this year will again offset gains on installed capacity.
- Value-add shift underway: The business is moving toward casting plus machining, converting existing casting-only customers or finding new ones with higher value addition; management flagged "tough decisions in coming quarters."
- Export inquiry pipeline: Increasing 4-wheeler inquiries from Europe and North America, with potential for high export growth; the company is being selective on viable business.
- Consolidation plan: Sunbeam, DR Axion, and Craftsman's own high-pressure die casting business will merge to create a single-campus entity in the Chennai region, with DR and Sunbeam subsidiaries merging first.
Srinivasan Ravi: "Our competitors across the world are $3 billion to $6 billion in revenue. These are the customers. Some of them are already present in India wanting to expand their footprint. When we go with each of the businesses at $200 million, $100 million revenue or $300 million revenue and try to take an order for $100 million, $200 million, it is to share the resources and to grow the business, it is becoming unwieldy."
Sunbeam Restructuring: Margin Reset Before Growth
- The problem: Sunbeam remains at single-digit margins due to legacy products from acquisitions 10-15 years ago, unprofitable customer relationships, and subsegments that cannot sustain viable pricing.
- The fix: Exiting unprofitable customers and subsegments, selling a low-value business line (~₹30 cr/year), resetting legacy prices, and enforcing aluminum price pass-through.
- The near-term cost: Capacity utilization will drop from 70% to 45-50% as legacy unviable products are exited; freed capacity will be redirected to new customers and products.
- Timeline: Results expected from Q2 FY27; operating costs will come down and margins should improve as the mix shifts.
- Land sale overhang: Sunbeam's land is up for sale after property prices rose due to government road widening, but buyers want a discount from current market price and management is unwilling to sell at the initial lower price.
Srinivasan Ravi: "We are just lacking behind on the margin-wise with a single, still at single-digit for various reasons. We are on the right track that we are exiting customers where it's not profitable, exiting subsegments of the business with same customers where it's not profitable totally or even selling one portion of the low-value business which is around INR30 crore per year."
Powertrain: Margin Spike Explained, Growth Ahead
- Margin spike driver: The recent EBITDA margin improvement was not from scale benefits; the primary driver was repair and maintenance costs (which had depressed margins for 4-5 quarters) ending, plus manpower reduction via automation and new products at newer prices averaging up legacy prices.
- Scale benefit still to come: Management noted that the real scale benefit has not yet materialized, implying further margin upside as volumes build.
- Growth outlook: Double-digit growth expected, stable and growing; truck engine block exports, previously flagged for discontinuation, will now continue.
- Stationary Engine Phase 1: On track for a $100 million revenue target in FY29/FY30; currently only samples and pilot lots are being invoiced, with capacity utilization at 10% because lines are still in the sample/prototype stage.
- Phase 2 decision: A decision will be taken by September based on order input; inquiry momentum is strong and the opportunity may go beyond $100 million.
- Phase 2 investment profile: The foundry site is modular with incremental investments, but the machining side requires more than incremental spend; preparation is underway.
Capital Allocation & Balance Sheet
- Capex uncertainty: FY27 capex is "not clear yet"; interim requirements have been taken but a September decision is needed, dependent on dollar rate and project gestation.
- No confirmation on run-rate: When asked if capex would be similar to last year (~₹1,000-1,100 cr), management did not confirm or deny, instead discussing dollar rate uncertainty and project timing.
- Net debt to EBITDA trajectory: Expected to fall below 2x in the current year itself, then further down to 1.5x; management stated "heavyweight lifting has been done."
- DR Axion greenfield: Civil construction is on; the plant will be commissioned by December and operational next year; land acquisition cost ~₹150 cr for ~50 acres adjacent to SIPCOT, taken through two companies (Suprash Developers and Srikara Technologies) because SIPCOT could not allocate land on time.
- Working capital normalization: Negative working capital impact of ₹400 cr in FY25 and ₹600 cr in FY26 was driven by the aluminum business ramp-up; payment cycles are now set and no big change is expected going forward.
Srinivasan Ravi: "As Craftsman, we look at more the outflow towards manpower costs, which is I think the for us which is causing sleepless nights, not the debt portion."
Cost Structure & Competitive Moat
- Capital cost barrier rising: Equipment that cost $100,000 twenty years ago now costs $110,000-$115,000 with better features, while the dollar has nearly doubled; land and building costs have risen sharply, with DR Axion's greenfield land alone at ~₹150 cr.
- Early investment thesis: Management argued that investing and borrowing earlier is a better choice because the same capex done this year will cost 1.5x more in a few years due to capex cost inflation.
- Labor cost headwind: Contract labor at less than $1/hour is expected to double or triple in coming years; the company has never cut back on capex, and high depreciation helps mitigate labor cost increases, but management sees this inflationary pressure as very difficult to pass on to customers.
- Automation as partial offset: New equipment requires less labor, and the company uses a mixture of own equipment manufacturing for special purpose machines to adjust requirements prudently and stay competitive.
- Manpower rationalization: Even after automation, manpower cost will still be inflationary; the company can mostly offset incremental cost but there will still be incremental cost, per management.
Srinivasan Ravi: "The capex cost for anybody entering this business is very, very, very large, totally. Here we are using a mixture of our own equipment manufacturing for the special purpose machines, and very, very prudently we are adjusting the requirements to still be competitive and get more orders."
Other Businesses & Opportunities
- DR Axion: More orders received from the same customer base and from new Indian OEMs; capacity is at 80-85% and cannot go beyond seasonally, so investments are ongoing to expand.
- Industrial engineering: A smaller portion of the portfolio but described as the backbone for powertrain and aluminum; good traction going forward.
- Data center storage racks: An opportunity exists for battery manufacturing storage projects, but awards may go to multinationals and the scale is not at China levels.
- Aluminum legacy product cleanup: Legacy products from acquisitions are being addressed by resetting prices or exiting; minuscule customers are being exited and capacity is being relocated to profitable customers.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| FY27 revenue growth | "Truly double digit, most probably in the mid-teens," assuming aluminum prices at current levels | FY27 |
| Stationary Engine Phase 2 decision | Decision based on September order input; inquiry momentum strong | September |
| Stationary Engine Phase 1 revenue | $100 million revenue target | FY29/FY30 |
| Net debt to EBITDA | Below 2x in current year, then down to 1.5x | Current year / thereafter |
| DR Axion greenfield commissioning | Plant commissioned by December, operational next year | December |
| Sunbeam margin improvement | Results from restructuring expected | Q2 FY27 |
| Alloy wheel Phase 2 expansion decision | No decision this financial year; decision after this financial year | Post-FY27 |
| Aluminum business $1 billion revenue | At current aluminum prices, should be there in 2-3 years | 2-3 years |
| Aluminum segment margin improvement | No 100-200 bps EBIT margin improvement next year; improvement when revenue crosses $1 billion and capex slows | Beyond FY27 |
Key Metrics
| Metric | Q4 FY26 |
|---|---|
| Revenue growth guidance (FY27) | Mid-teens, assuming stable aluminum prices |
| Consolidated ROCE | 16% |
| Net debt to EBITDA | 2.43x, expected below 2x in FY27 and further to 1.5x |
| Consolidated debt (excl. Gurgaon land) | ~₹2,700 cr |
| Powertrain capacity utilization | ~65–70%, upper limit 85%; ~60% including new large-engine business |
| Alloy wheel exit run rate (March annualized) | ~0.3 cr wheels, capacity 0.55 cr; FY27 expected ~0.4 cr (70–80% utilization) |
| Alloy wheel revenue (FY26) | ~₹280 cr |
| DR Axion capacity utilization | ~80–85% |
| Sunbeam capacity utilization | ~70%, expected to drop to 45–50% near-term as unviable products exited |
| Aluminum segment EBIT margin | 10.3%, flat YoY |
| Stationary engine order book | $100 mn finalized; $100 mn revenue target by FY29/FY30 |
| New powertrain (large engines) revenue share | Not even 0.5% of powertrain revenue currently; very low single-digit in FY27 |
| Sunbeam low-value business sold | ~₹30 cr per year line sold |
| DR Axion greenfield land cost | ~₹150 cr for ~50 acres |
| Manpower cost inflation | ~20% YoY increase expected, versus earlier 5–10% |